Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (PC: Running Debian in QEMU (Optional): Line Format)
 
(429 intermediate revisions by 23 users not shown)
Line 1: Line 1:
 
[[Category: Linux]]
 
[[Category: Linux]]
 
[[Category: OMAP]]
 
[[Category: OMAP]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
[[Category:Development Boards]]
 +
[[Category: BeagleBoard]]
 +
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed. For a more optimized and faster system checkout: [http://mojo.handhelds.org/ Mojo Project] (armv5el & armv6el-vfp editions).  The OMAP3530 on the Beagle Board is armv7-a. See [[BeagleBoardHandheldsMojo|Handhelds Mojo (ARM) at BeagleBoard]] (formerly known as Ubuntu (ARM)) page, too.
+
Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48
  
= Recommended Kernel =
+
= Help =
So like any big document, it's hard to keep everything up to date.  So if your trying Debian/Mojo for the first time, here's what i recommend, (and it's the same thing i'm running on the build beagle.)
 
  
Considered Stable: 2.6.28-oer14 :
+
If you need any help:
  
lenny: http://www.rcn-ee.com/deb/kernel/beagle/lenny/v2.6.28-79d042a-oer14/
+
*Kernel related help:
 +
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 +
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 +
** Kernel Trees
 +
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v5.4.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 +
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
squeeze: http://www.rcn-ee.com/deb/kernel/beagle/squeeze/v2.6.28-79d042a-oer14/
+
*When asking for help, please provide some debugging information:
 +
** U-Boot Version installed on board
 +
** Kernel Version: uname -a
 +
** pastebin dmesg
 +
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
  
Uboot: 2008-rc2 or +
+
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
 +
* http://beagleboard.org/source
  
Currently Testing with Build Beagle: http://www.rcn-ee.com/deb/kernel/beagle/squeeze/v2.6.28-79d042a-oer14/
+
= Recommended Beagle Software =
  
= Native Install via debian-installer (NON QEMU based) =
+
Mainline U-Boot:
Note: This install method requires an LCD+usb(keyboard,etc), and uboot 2008-rc2 (Upgrading u-boot (2.6.27's and later)) or later..
+
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
Testing First Release:
+
= Debian NetInstall =
  
==PC: Format SD Card==
+
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
 +
 
 +
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
 
Starting with an empty SD card and using gparted, create:
 
50 MiB Primary Partition, fat32
 
Leave remaining space for the Debian-Installer
 
  
==PC: Setup SD uboot Partition==
+
== Debian 10 (buster) ==
  
Mount your SD card fat32 partition. (/media/disk/)
+
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch
  
Debian Lenny
+
So For the BeagleBoard xM:
cd /media/disk/
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  wget http://www.rcn-ee.com/deb/kernel/CC-v2.6.28-79d042a-oer14
 
wget http://ftp.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
mv CC-v2.6.28-79d042a-oer14 uImage
 
gzip -d initrd.gz
 
dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
  
Script Method (for u-boot 2009+)
+
*Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
  
cd /media/disk/
+
= Demo Image =
wget http://www.rcn-ee.com/deb/kernel/CC-v2.6.28-79d042a-oer14
 
wget http://ftp.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
wget http://www.rcn-ee.com/deb/kernel/deb-netboot.scr
 
mv CC-v2.6.28-9a6536c-oer8 uImage
 
gzip -d initrd.gz
 
dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
mv deb-netboot.scr boot.scr
 
  
For lenny+1 aka squeeze
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
Use: http://ftp.debian.org/debian/dists/squeeze/main/installer-armel/current/images/versatile/netboot/initrd.gz
+
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v5.4.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black/PocketBeagle:  Kernel v4.19.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.19.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.19.y -b tmp
 +
./build_kernel.sh
  
For Sid
+
== Debian (buster) ==
Use: http://ftp.debian.org/debian/dists/sid/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
  
==Beagleboard==
+
Default username/password:
 +
*username: debian
 +
*password: temppwd
  
Mount SD card
+
Image Updated:
For Kernel 2.6.26 and 2.6.27
+
*2020-03-12
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
setenv bootargs 'console=ttyS2,115200n8 console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M video=omapfb:mode:1280x720@60'
+
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
saveenv
+
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
boot
+
*2019-04-10
+
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
For Kernel 2.6.28 and higher using DSS2
+
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
+
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
setenv bootargs 'console=ttyS2,115200n8 console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M omap-dss.def_disp=lcd omapfb.video_mode=1280x720MR-24@60'
+
*2018-12-10
saveenv
+
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
boot
+
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
+
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
This isn't needed for the "Script Method (for u-boot 2009+)"
 
  
The debian-installer should load via the framebuffer, if the screen remains blank, try different resolutions for the bootargs:
+
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
 +
Getty, Serial Port
  
video=omapfb:mode:1280x720@60
+
Default user: debian pass: temppwd
Modes:
 
"640x480@60""800x600@60""1024x768@60""1280x720@60"480p60""576p50""720p50""720p60""1080p24""1080p25""1080p30",
 
  
  Continue the install without loading kernel modules? : <yes>
+
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz
  
DON'T Select "Guided - use entire disk" <- Loose the fat boot partition.
+
Verify Image with:
 +
sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
 +
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz
  
Recommended: Select Guided - Use the largest continuous free space
+
Unpack Image:
 +
tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
 +
cd debian-10.3-console-armhf-2020-03-12
  
Example:
+
If you don't know the location of your SD card:
  Partition #2 of SCSI1 (0,0,0) (sda) as ext3
+
  sudo ./setup_sdcard.sh --probe-mmc
Partition #5 of SCSI1 (0,0,0) (sda) as swap
 
  
Continue without installing a kernel? : <yes>
+
You should see something like:
  
  Standard System
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
 
No BootLoader: <ok>
 
 
 
==Install complete==
 
Reboot (aka remove power)
 
 
 
Uboot update bootcmd & bootargs
 
 
 
Script Method (copy to fat32 partition)
 
 
   
 
   
  ext3
+
  fdisk -l:
  wget http://www.rcn-ee.com/deb/kernel/deb-ext3.scr
+
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
mv deb-ext3.scr boot.scr
+
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  ext2
+
  lsblk:
  wget http://www.rcn-ee.com/deb/kernel/deb-ext2.scr
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
  mv deb-ext2.scr boot.scr
+
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part / '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
  sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
For Linux Kernel 2.6.28 and higher using DSS2
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro omap-dss.def_disp=lcd omapfb.video_mode=1280x720MR-24@60'
 
saveenv
 
boot
 
  
For Linux Kernel 2.6.26 and 2.6.27
+
Install Image:
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:mode:1280x720@60'
 
saveenv
 
boot
 
  
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+
Quick install script for [board]
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
==Login & Install kernel-image==
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Variants          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15 (BeagleBone AI)  - am57xx-beagle-x15
  
cd /home/<user>
+
So for the BeagleBoard xM:
  sudo apt-get install uboot-mkimage
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
wget http://www.rcn-ee.com/deb/kernel/beagle/lenny/v2.6.28-79d042a-oer14/linux-image-2.6.28-oer14_1.0lenny_armel.deb
 
sudo dpkg -i linux-image*
 
  
Extract linux-image's vmlinuz-*
+
Advanced: Build Image:
dpkg -x linux-image* ./temp
 
  
Mount fat32 partition
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
  sudo mount /dev/mmcblk0p1 /mnt
+
cd omap-image-builder
 +
git checkout v2020.03 -b tmp
  
Build uboot compatible image and copy to fat32 boot partition
+
Stable:
sudo mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-*  /mnt/uImage
 
  
Clean up
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf
  rm -rfd temp
 
  
Sync, umount Partitions and Reboot
+
= Flasher =
  
= QEMU install method via debian-installer (emulated arm core via Desktop PC)=
+
== eMMC: All BeagleBone Variants with eMMC ==
  
This methods lasted 4 hours on a PC Ubuntu/Lenny (P4 2GHz) with an external USB2.0 card reader.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ONSimply remove power, remove the microSD card and Debian will now boot directly from eMMC.
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
 
  apt-get install qemu
 
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
 
  
==PC: Format SD Card==
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
You will need a 1GB SD card or greater, depending on the installation chosen :
+
This script will only take about 5-6 Minutes after power on.
Standard System (without graphical environment) : ~455MB
 
+ Desktop environment (GNOME) : ~2.3GB
 
Please note that installer download all packages before installing them, that's why you'll need more space disk.
 
  
Starting with an empty SD card and using gparted/fdisk, create:
+
Notes:
50 MiB Primary Partition, fat32
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
Leave remaining space for the Debian-Installer
+
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
==PC: Preparation==
+
User: debian
 +
pass: temppwd
  
Create a working directory to keep your files organized.
+
Image Updated:
 +
*2020-03-12
 +
** All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
  
mkdir debian-armel
+
Get prebuilt image:
cd debian-armel/
+
  wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.26-1-versatile
 
  
==PC: Install Debian in QEMU==
+
Verify Image with:
 +
sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
 +
12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Quick Note: Debian Lenny is undergoing Beta/RC testing so these debian installers are currently way out of date, so it will tell you their are unavailable kernel modules, just ignore the question and continue. These modules will be provided later, with the provided linux-image deb.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
To install (ARM EABI) Debian inside QEMU:
+
Linux: (dd)
 +
xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-1-versatile -initrd initrd.gz -m 256 -hda /dev/sdX -append "root=/dev/ram mem=256M"
+
== eMMC: BeagleBoard-X15 and BeagleBone AI ==
Note: root/sudo access is required to access /dev/sdX directly (verify mmc card with fdisk -l)
 
  
Partition disks, default settings should work for most: Guided - use the largest continuous free space
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
[[Image:Beagleboarddebian-partitiondisk.png]]
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
==PC: Running Debian in QEMU (Optional)==
+
This script will only take about 5-6 Minutes after power on.
Note: This section is only useful for people with out a usb-network device for their beagle who would like to install additional applications, otherwise just skip to the next subsection to install your linux-kernel by copying files from your desktop pc to a SD card.
 
As ext3 filesystem support is not included in kernel you will need an initrd, just copy the one installed in the SD card in /boot.
 
  
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-1-versatile -initrd initrd.img-2.6.26-1-versatile -m 256 -hda /dev/sdX -append "root=/dev/sda2 mem=256M"
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Note: Time will be incorrect.
+
User: debian
 +
pass: temppwd
  
sudo apt-get install ntpdate
+
Image Updated:
ntpdate pool.ntp.org
+
*2020-03-12
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
Install default deb packages for linux-image & linux-headers.
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
  Stable  2.6.28
+
Verify Image with:
  wget http://www.rcn-ee.com/deb/kernel/beagle/lenny/v2.6.28-79d042a-oer14/linux-image-2.6.28-oer14_1.0lenny_armel.deb
+
  sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
sudo dpkg -i *.deb
+
  b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Note: It's easier to download these straight to the sd card after you've mounted the SD card to copy uImage to the FAT partition.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
==PC: Linux Kernel Preparation ==
+
Linux: (dd)
 +
xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Install uboot-mkimage utility
+
= raw microSD img =
sudo apt-get install uboot-mkimage
 
  
Remount SD card, Ubuntu remounts SD card like this:
+
== BeagleBoard xM ==
/media/vfat/ <fat32>
 
/media/debian/ <ext3>
 
  
Download Kernel-Image
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
cd /media/debian/home/<user>/
 
wget http://www.rcn-ee.com/deb/kernel/beagle/lenny/v2.6.27-2a3408b-oer4/linux-image-2.6.27-oer4_1.0lenny_armel.deb
 
  
Extract linux-image's vmlinuz-*
+
User: debian
dpkg -x linux-image* ./temp
+
pass: temppwd
  
Build uboot compatible image and copy to /media/disk/ <fat32 boot partition>
+
Auto partition resize:
  mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-* /media/vfat/uImage
+
cd /opt/scripts/tools
 +
git pull
 +
  ./grow_partition.sh
 +
  sudo reboot
  
Clean up
+
Image Updated:
rm -rfd temp
+
*2020-03-12
 +
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
*2018-12-10
 +
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
  
Sync, umount Partitions and Install sd card in beagleboard
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
=Beagleboard First Boot, uboot, general notes=
+
Verify Image with:
 +
sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
 +
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Insert SD Card and power up Beagleboard.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
==Boot==
+
Linux: (dd)
 +
xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Using a terminal program, stop u-boot and add these commands:
+
== All BeagleBone Variants and PocketBeagle==
  
For Linux Kernel 2.6.26 and 2.6.27
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro video=omapfb:mode:1280x720@60'
 
saveenv
 
boot
 
  
You shall adapt the resolution to you screen as following :
+
User: debian
video=omapfb:mode:1280x720@60
+
pass: temppwd
Modes:
 
"640x480@60""800x600@60""1024x768@60""1280x720@60"480p60""576p50""720p50""720p60""1080p24""1080p25""1080p30",
 
  
For Linux Kernel 2.6.28 and higher using DSS2
+
Auto partition resize:
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
+
  cd /opt/scripts/tools
  setenv bootargs 'console=ttyS2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootdelay=2 rootfstype=ext3 ro omap-dss.def_disp=lcd omapfb.video_mode=1280x720MR-24@60'
+
git pull
saveenv
+
./grow_partition.sh
  boot
+
  sudo reboot
  
You shall adapt the resolution to you screen as following :
+
Image Updated:
omapfb.video_mode=1280x720MR-24@60
+
*2020-03-12
Modes:
+
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
"1024x768MR-24@60""800x600-MR24@60" ...
+
*2019-04-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
  
Here is more explanation on dss video options : [http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=blob;f=Documentation/fb/modedb.txt;h=ec4dee75a35450376ad13442ea926eaf76de76aa;hb=HEAD]
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
The Beagleboard will reboot 3-4 times while the ext3 filesystem is repaired. (may have to remove power etc)
+
Verify Image with:
 +
sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
 +
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
=== Upgrading u-boot (2.6.27's and later) ===
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
Using gparted, create a new 50MB Primary fat32 Parition on blank SD card.
+
Linux: (dd)
 +
xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
wget http://www.angstrom-distribution.org/demo/beagleboard/u-boot.bin
+
== BeagleBoard-X15 and BeagleBone AI==
cp u-boot.bin /media/disk
 
  
uboot
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
mmcinit
 
fatload mmc 0 0x80200000 u-boot.bin
 
nand unlock
 
nand ecc sw
 
nand erase 80000 160000
 
nand write.i 0x80200000 80000 160000
 
reset
 
  
==Debian on Beagleboard==
+
User: debian
 +
pass: temppwd
  
Debian on BeagleBoard uses the following configuration:
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
* Console log = Serial Terminal
+
Image Updated:
* User Console = HDMI port + usb (keyboard, mouse, etc).  
+
*2020-03-12
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
If you want to log in with the serial port, you will have to add to /etc/inittab
+
Get prebuilt image:
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
And if you want to log in as root on the serial port, add ttyS2 to /etc/securetty.
+
Verify Image with:
 +
sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
 +
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Note : the beagle board I have was not configured as USB host. I had to modify it to be able to use mouse and keyboards (see [http://elinux.org/BeagleBoard#OTG]). I you do not want to do this, you'll have to install a Vnc server on the beagle to access desktop.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
==Current Issues==
+
Linux: (dd)
#Xorg not displaying, modify /etc/X11/xorg.conf as following :
+
  xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  Section "Device"
 
Identifier "Configured Video Device"
 
Option "UseFBDev" "true"
 
Driver "fbdev"
 
EndSection
 
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
 
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue
 
date +"%m%d%y%H%M" -s MMDDYYHHMM
 
  
[[Image:Beagleboarddebian-GNOME.jpg]]
 
  
==Notes==
+
= Debian Configuration =
#'fbdev' is normally *slow* since it completely relies on the system cpu to update the framebuffer.  Once the video processing core's driver is released this will no longer be an issue.
 
# Debian/Gnome actually need the swap to run (up to 90Mo of swap space on my beagle with 128Mo RAM shipped on it) so that it's even slower when using the SD card (try using an external hdd disk).
 
  
=Advanced: Building a Native Debian Kernel=
+
==Install Latest Kernel Image==
  
Note, these are just general build hints.
+
General apt syntax for searching and installing a specific kernel:
 +
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
sudo reboot
  
==Install Dependencies==
+
Latest kernel script
   
+
  cd /opt/scripts/tools/
  apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev
+
  git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
==u-boot==
+
== 4.19.x-ti ==
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
  
There is a debian package for this now:
+
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
  apt-get install uboot-mkimage
+
  --ti-channel --lts-4_19
  
If you must build from upstream:
+
  4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
  wget -nc http://beagleboard.googlecode.com/files/u-boot_beagle_revb.tar.gz
+
  --ti-rt-channel --lts-4_19
  tar -xf u-boot_beagle_revb.tar.gz
 
cd u-boot/
 
make CROSS_COMPILE= distclean
 
make CROSS_COMPILE= omap3530beagle_config
 
make CROSS_COMPILE= tools
 
  
Add /tools/ to $PATH
+
== Mainline (4.19.x lts) ==
PATH=/home/<user>/u-boot/tools:"${PATH}"
 
  
==Linux Kernel==
+
4.19.x BeagleBone/BeagleBone Black
 +
--bone-kernel --lts-4_19
  
  git clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
  4.19.x BeagleBone/BeagleBone Black + RT
cd linux-omap-2.6/
+
--bone-rt-kernel --lts-4_19
git checkout -b beagle <tag you wish to use>
 
  
Patch Kernel with patches you need:
+
== Debian 9: stretch ==
  patch -p1 < ~/dl/patches/*.patch
+
  sudo apt-get install linux-image-armmp
  
Setup Kernel .config
+
Reboot with your new Kernel Image.
make CROSS_COMPILE= distclean
 
  
Copy or Make your defconfig
+
== Xorg Drivers ==
cp ~/dl/defconfig .config
 
or
 
make CROSS_COMPILE= menuconfig
 
  
Create Debian linux-image* & linux-headers* Package
+
Script:
  make-kpkg --cross_compile - clean
+
  cd /opt/scripts/tools/
  fakeroot make-kpkg --cross_compile - kernel_image kernel_headers
+
  git pull
 
 
Create U-boot uImage
 
make CROSS_COMPILE= uImage
 
 
 
= Deb Builder =
 
  
Auto builds for lenny, sid, and mojo's; linux-image and linux-headers's in appropriate schroot's.
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
[http://www.rcn-ee.com/deb/kernelLatest Images]
+
BeagleBone/BeagleBone Black:
[http://www.rcn-ee.com/deb/kernel/changes.txt  Changelog]
+
cd /opt/scripts/tools/graphics/
 +
  ./ti-tilcdc.sh
  
= Rebuilding *.deb Kernel's from Source =
+
== SGX Drivers ==
  
Note, this is done native on the BeagleBoard...
+
=== SGX BeagleBone/BeagleBone Black ===
  
GIT Checkout, Beagleboard patches, and defconfig.
+
[[BeagleBoneBlack/SGX_%2B_Qt_EGLFS_%2B_Weston|A page is dedicated for the installation and use of the graphics accelerator]].
 
 
Requires:
 
sudo aptitude install git-core gcc wget kernel-package fakeroot build-essential
 
 
 
For this example lets look at: http://cgit.openembedded.net/cgit.cgi?url=openembedded/commit/&id=2d2df68f89a7f8dffd87cb9db42cad8c46891c28
 
 
 
All build that i do are logged here: http://www.rcn-ee.com/deb/kernel/changes.txt
 
 
 
==Retrieve the GIT checkout==
 
 
 
GIT Checkout: 15f75b6226c2d3b82062bb721e7cb9a1d6f35efd  or Shorthand: 15f75b6
 
 
 
git-clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
 
cd linux-omap-2.6/
 
 
or if you already downloaded it..
 
 
cd linux-omap-2.6/
 
git pull
 
 
git checkout 15f75b6
 
git checkout -b v2.6.28-15f75b6
 
git archive --format=tar --prefix=v2.6.28-15f75b6/ v2.6.28-15f75b6 | gzip > ../v2.6.28-15f75b6.tar.gz
 
git checkout master
 
git branch v2.6.28-15f75b6 -D
 
cd ..
 
  
==Copy patches and defconfig==  
+
= Building Kernel =
  
Open linux-omap**.bb: http://cgit.openembedded.net/cgit.cgi?url=openembedded/tree/packages/linux/linux-omap_git.bb&id=2d2df68f89a7f8dffd87cb9db42cad8c46891c28
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  
This contains 20+ patches need to form a specific (oe) Openembedded release, too keep things neat and simple for my beagle builder, I'll usually combine this into a single diff located here along with the defconfig. http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.28-15f75b6-oer9/
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
wget http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.28-15f75b6-oer9/v2.6.28-15f75b6-oer9.diff
+
== BeagleBone ==
  wget http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.28-15f75b6-oer9/defconfig
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
==Rebuild Deb==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Extract Kernel Source
+
== Panda/Panda ES ==
  tar -xf v2.6.28-15f75b6.tar.gz
+
  http://eewiki.net/display/linuxonarm/PandaBoard
cd v2.6.28-15f75b6/
 
  
Apply Patch
+
= Upgrading from Debian 5 to Debian 6 =
patch -p1 < ../v2.6.28-15f75b6-oer9.diff
 
  
Copy Defconfig
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
cp ../defconfig .config
 
  
Testing Changes
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
make menuconfig
 
  
Clean
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
make-kpkg --cross_compile - clean
 
  
Build
+
sudo apt-get update ; sudo apt-get upgrade
  fakeroot make-kpkg --cross_compile - kernel_image kernel_headers
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
(and wait 2hr 15mins)
+
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Latest revision as of 22:01, 29 May 2020

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 10 (buster)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v5.4.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.19.y -b tmp
./build_kernel.sh

Debian (buster)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz

Verify Image with:

sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz

Unpack Image:

tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
cd debian-10.3-console-armhf-2020-03-12

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Variants - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2020.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Flasher

eMMC: All BeagleBone Variants with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Variants and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX


Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

4.19.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_19
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_19

Mainline (4.19.x lts)

4.19.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_19
4.19.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_19

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

A page is dedicated for the installation and use of the graphics accelerator.

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade