Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m (KNOWN ISSUES: merge from ubuntu "Help" section)
 
(319 intermediate revisions by 17 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. To prepare the SD card and install (ARM EABI) Debian on it, [http://bellard.org/qemu/ QEMU] on host PC will be used, following Aurélien Jarno's excellent [http://www.aurel32.net/info/debian_arm_qemu.php Debian on an emulated ARM machine] howto.
+
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
  
Note: Debian armel deb's are compiled for armv4t, this allows debian to support a larger number of arm devices with a single port, at only the sacrifice of speed.
+
Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48
 
 
= KNOWN ISSUES =
 
 
 
2.6.29-oer* USB still flaky on the RevC ehci port.. --[[User:RobertCNelson|RobertCNelson]] 18:17, 6 May 2009 (UTC)
 
  
 
= Help =
 
= Help =
Line 16: Line 12:
  
 
*Kernel related help:
 
*Kernel related help:
 +
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [http://beagleboard.org/discuss Email beagleboard user groups]
+
** Kernel Trees
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v5.4.x kernel branch]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Launchpad Stable Kernel 2.6.31 src]
+
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-dev Launchpad Development Kernel 2.6.32 src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-mainline Launchpad Kernel git src]
 
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/omap-lucid Launchpad Kernel for Ubuntu Lucid (10.04)]
 
** [http://rcn-ee.net/deb/ trac/svn interface for the kernel builds]
 
  
 
*When asking for help, please provide some debugging information:
 
*When asking for help, please provide some debugging information:
Line 31: Line 25:
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
 
*** Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)
  
= Recommended Kernel =
+
= Official BeagleBoard.org Images for shipping with BeagleBone Black =
So like any big document, it's hard to keep everything up to date. So if your trying Debian/Mojo for the first time, here's what i recommend, (and it's the same thing i'm running on the build beagle.)
+
* http://beagleboard.org/source
  
Stable: 2.6.29-oer44.1 :
+
= Recommended Beagle Software =
  
Uboot: http://elinux.org/BeagleBoardDebian#Upgrading_U-boot
+
Mainline U-Boot:
 +
* All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
 +
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 +
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
= Native Install via debian-installer (NON QEMU based) =  
+
= Debian NetInstall =  
Note: This install method requires an LCD+usb(keyboard,etc), and uboot 2008-rc2 (Upgrading u-boot (2.6.27's and later)) or later..
 
  
Testing First Release:
+
Scripts:
 +
git clone https://github.com/RobertCNelson/netinstall.git
 +
cd netinstall
  
==Development PC: Format SD Card==
+
Device Options:
 +
BeagleBoard --dtb omap3-beagle
 +
BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 +
BeagleBone (serial) --dtb am335x-bone-serial
 +
BeagleBone (video via cape) --dtb am335x-bone-video
 +
BeagleBone Black --dtb am335x-boneblack
 +
PandaBoard (A1->A3) --dtb omap4-panda
 +
PandaBoard (A4->Ax) --dtb omap4-panda-a4
 +
PandaBoard ES  --dtb omap4-panda-es
  
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
Starting with an empty SD card and using gparted, create:
+
== Debian 10 (buster) ==
50 MiB Primary Partition, fat32
 
Leave remaining space for the Debian-Installer
 
  
==Development PC: Setup SD U-boot Partition==
+
Quick Install script for "board"
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch
  
Mount your SD card fat32 partition. (/media/disk/)
+
So For the BeagleBoard xM:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  
Debian Lenny Stable
+
*Options:
cd /media/disk/
+
**--firmware : installs firmware
sudo wget http://rcn-ee.net/deb/kernel/CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage
+
**--serial-mode : debian-installer uses Serial Port
sudo wget http://ftp.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
sudo mv CC-beagle-v2.6.29-58cf2f1-oer44.1.uImage uImage
 
sudo gzip -d initrd.gz
 
sudo dd if=initrd of=initrd.pad ibs=8388608 conv=sync
 
  
Tested: 2.6.29-oer44.1 install RevB5 & RevC2 --[[User:RobertCNelson|RobertCNelson]] 18:53, 10 September 2009 (UTC)
+
= Demo Image =
  
==Beagleboard: Setup U-boot for netboot install==
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v5.4.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black/PocketBeagle:  Kernel v4.19.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.19.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.19.y -b tmp
 +
./build_kernel.sh
  
Mount SD card
+
== Debian (buster) ==
For Linux Kernel 2.6.29 and higher using DSS2
 
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
 
or
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 initrd.pad; bootm 0x80300000'
 
 
Debian Install over DVI Port
 
setenv bootargs 'console=tty0 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M omapfb.mode=dvi:1280x720MR-16@60'
 
 
Debian Install over the Serial Port *(this seems to be a regression from 2.6.28, which allowed you to specify both...)
 
setenv bootargs 'console=ttyS2,115200n8 ramdisk_size=8192 root=/dev/ram0 rw rootfstype=ext2 initrd=0x81600000,8M'
 
 
saveenv
 
boot
 
  
The debian-installer should load via the framebuffer, if the screen remains blank, try different resolutions for the bootargs:
+
Default username/password:
 +
*username: debian
 +
*password: temppwd
  
You shall adapt the resolution to you screen as following :
+
Image Updated:
omapfb.mode=dvi:1280x720MR-16@60
+
*2020-03-12
Modes:
+
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
"1024x768MR-16@60""800x600MR-16@60" ...
+
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 +
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
  
Here is more explanation on dss video options : [http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=blob;f=Documentation/fb/modedb.txt;h=ec4dee75a35450376ad13442ea926eaf76de76aa;hb=HEAD]
+
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
 +
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
 +
Getty, Serial Port
  
Choose a language
+
Default user: debian pass: temppwd
  C - No localization
 
  English - English
 
  
Configure the network:
+
Get prebuilt image:
  usb0: USB net <- See below for 2.6.29. Could not find usb0 with B7 installing 2.6.28.
+
wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz
  eth0: Ethernet <- Your usb-ethernet device
 
  wlan0: Wifi <- Your usb-wifi device.. See [[BeagleBoardDebianWifiInstallInfo]] for my hack to set it up.
 
  
Configuring usb0 network bridge for 2.6.29:
+
Verify Image with:
  While you chose your keyboard layout, setup a bridge with ethX and usbX.
+
sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
  # ifconfig ethX 0.0.0.0
+
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz
  # ifconfig usbX 0.0.0.0
 
  # brctl addbr brX
 
  # brctl addif brX ethX
 
  # brctl addif brX usbX
 
  # ifconfig brX up
 
  # dhclient brX
 
  ''*Sometimes the first beagle DHCP will fail(probably due PC trying autoconnect), just run the auto configuration again and it will configure it right.''
 
  
  Continue the install without loading kernel modules? : <yes>
+
Unpack Image:
 +
  tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
 +
cd debian-10.3-console-armhf-2020-03-12
  
Partition disks: This partitioner doesn't have the inform.....? : <yes>
+
If you don't know the location of your SD card:
  Logical Volume Manager not available: <Continue>
+
sudo ./setup_sdcard.sh --probe-mmc
  
Partition disks:
+
You should see something like:
  Guided - Use the largest continuous free space
 
  
  Partitioning scheme....
+
  Are you sure? I don't see [/dev/idontknow], here is what I do see...
 
 
Example:
 
MMC/SD card #1 (mmcblk0) - 2.0 GB Unknown
 
>  #1 primary  57.5 MB    fat32
 
>  #2 primary  1.8 GB B f ext3  /
 
>  #5 logical 148.0 MB  f swap  swap
 
Finish partitioning and write changes to disk
 
  Write the changes to disk? : <yes>
 
 
 
No installable kernel was found in the defined APT sources? :
 
  Continue without installing a kernel? : <yes>
 
 
 
Standard System
 
 
 
No BootLoader: <ok>
 
 
 
==Beagleboard: Setup U-boot for Normal Boot==
 
Reboot (aka remove power)
 
 
 
Uboot update bootcmd & bootargs
 
 
 
For Linux Kernel 2.6.29 and higher using DSS2
 
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
or
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
 
   
 
   
  DVI Port
+
  fdisk -l:
  setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
+
  Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
   
 
   
  Serial Port
+
  lsblk:
  setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
+
  NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
   
+
sda      8:0    0 465.8G  0 disk
  saveenv
+
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
  boot
+
  ├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
  ├─sdd1  8:49  1    64M  0 part
 +
  └─sdd2  8:50  1  3.6G  0 part
  
Debian will fix the ext3 partition, it'll try to reboot, after halting remove and reapply power.
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
==Beagleboard: install kernel-image==
+
Install Image:
  
===Script File===
+
Quick install script for [board]
Note: this will be updated from time to time. (tested off course, may need "sudo apt-get install wget")
+
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
  
wget http://www.rcn-ee.net/deb/kernel/update_kernel.sh
+
board options:
  sudo /bin/bash update-kernel.sh
+
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Variants          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15
  
Note: vmlinuz symbolic link (yes <or> no)... Still not sure this matters, i select <yes>...
+
So for the BeagleBoard xM:
 +
sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
  
===Manual Method===
+
Advanced: Build Image:
  
  cd /home/<user>
+
  git clone https://github.com/RobertCNelson/omap-image-builder.git
sudo apt-get install uboot-mkimage
+
cd omap-image-builder
wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/linux-image-2.6.29-oer44.1_1.0lenny_armel.deb
+
  git checkout v2020.03 -b tmp
  sudo dpkg -i linux-image*
 
  
Extract linux-image's vmlinuz-*
+
Stable:
dpkg -x linux-image* ./temp
 
  
Mount fat32 partition
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf
  sudo mount /dev/mmcblk0p1 /mnt
 
  
Build uboot compatible image and copy to fat32 boot partition
+
= Flasher =
sudo mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-*  /mnt/uImage
 
  
Clean up
+
== eMMC: All BeagleBone Variants with eMMC ==
rm -rfd temp
 
  
Sync, umount Partitions and Reboot
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
= QEMU install method via debian-installer (emulated arm core via Desktop PC)=
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
This methods lasted 4 hours on a PC Ubuntu/Lenny (P4 2GHz) with an external USB2.0 card reader.
+
This script will only take about 5-6 Minutes after power on.
Install QEMU on your host PC. This assumes that your host PC is running Debian as well. If not, install QEMU the way your host PC distribution uses.
 
apt-get install qemu
 
Note: If your debian armel image crashes while fscking the partition, rebuild qemu from trunk.
 
  
==Development PC: Format SD Card==
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
You will need a 1GB SD card or greater, depending on the installation chosen :
+
User: debian
Standard System (without graphical environment) : ~455MB
+
pass: temppwd
+ Desktop environment (GNOME) : ~2.3GB
 
Please note that installer download all packages before installing them, that's why you'll need more space disk.
 
  
Starting with an empty SD card and using gparted/fdisk, create:
+
Image Updated:
50 MiB Primary Partition, fat32
+
*2020-03-12
Leave remaining space for the Debian-Installer
+
** All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
  
==Development PC: Preparation==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Create a working directory to keep your files organized.
+
Verify Image with:
 +
sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
 +
12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
mkdir debian-armel
+
Windows/Mac/Linux gui
cd debian-armel/
+
  http://etcher.io
wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/initrd.gz
 
  wget ftp://ftp.us.debian.org/debian/dists/lenny/main/installer-armel/current/images/versatile/netboot/vmlinuz-2.6.26-2-versatile
 
  
==Development PC: Install Debian in QEMU==
+
Linux: (dd)
 +
xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Quick Note: Debian Lenny is undergoing Beta/RC testing so these debian installers are currently way out of date, so it will tell you their are unavailable kernel modules, just ignore the question and continue. These modules will be provided later, with the provided linux-image deb.
+
== eMMC: BeagleBoard-X15 and BeagleBone AI ==
  
To install (ARM EABI) Debian inside QEMU:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
  
  sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-2-versatile -initrd initrd.gz -m 256 -hda /dev/sdX -append "root=/dev/ram mem=256M"
+
Script for reference: (this is the script that writes to the eMMC)
Note: root/sudo access is required to access /dev/sdX directly (verify mmc card with fdisk -l)
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
Partition disks, default settings should work for most: Guided - use the largest continuous free space
+
This script will only take about 5-6 Minutes after power on.
  
[[Image:Beagleboarddebian-partitiondisk.png]]
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
==Development PC: Running Debian in QEMU (Optional)==
+
User: debian
Note: This section is only useful for people with out a usb-network device for their beagle who would like to install additional applications, otherwise just skip to the next subsection to install your linux-kernel by copying files from your desktop pc to a SD card.
+
pass: temppwd
As ext3 filesystem support is not included in kernel you will need an initrd, just copy the one installed in the SD card in /boot.
 
  
sudo qemu-system-arm -M versatilepb -kernel vmlinuz-2.6.26-2-versatile -initrd initrd.img-2.6.26-2-versatile -m 256 -hda /dev/sdX -append "root=/dev/sda2 mem=256M"
+
Image Updated:
 +
*2020-03-12
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
Note: Time will be incorrect.  
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
  sudo apt-get install ntpdate
+
Verify Image with:
  ntpdate pool.ntp.org
+
  sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
 +
  b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Install default deb packages for linux-image.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
Stable  2.6.29
+
Linux: (dd)
  wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/linux-image-2.6.29-oer44.1_1.0lenny_armel.deb
+
  xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
sudo dpkg -i *.deb
 
  
Note: It's easier to download these straight to the sd card after you've mounted the SD card to copy uImage to the FAT partition.
+
= raw microSD img =
  
==Development PC: Linux Kernel Preparation ==
+
== BeagleBoard xM ==
  
Install uboot-mkimage utility
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
sudo apt-get install uboot-mkimage
 
  
Remount SD card, Ubuntu remounts SD card like this:
+
User: debian
/media/vfat/ <fat32>
+
pass: temppwd
/media/debian/ <ext3>
 
  
Download Kernel-Image
+
Auto partition resize:
  cd /media/debian/home/<user>/  
+
  cd /opt/scripts/tools
  wget http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/linux-image-2.6.29-oer44.1_1.0lenny_armel.deb
+
git pull
 +
  ./grow_partition.sh
 +
sudo reboot
  
Extract linux-image's vmlinuz-*
+
Image Updated:
dpkg -x linux-image* ./temp
+
*2020-03-12
 +
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
 +
*2019-04-10
 +
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
 +
*2018-12-10
 +
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
  
Build uboot compatible image and copy to /media/disk/ <fat32 boot partition>
+
Get prebuilt image:
mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./temp/boot/vmlinuz-*  /media/vfat/uImage
+
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Clean up
+
Verify Image with:
  rm -rfd temp
+
  sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
 +
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Sync, umount Partitions and Install sd card in beagleboard
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
== Beagleboard: Setup U-boot for boot ==
+
Linux: (dd)
 +
xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Insert SD Card and power up Beagleboard.
+
== All BeagleBone Variants and PocketBeagle==
  
Using a terminal program, stop u-boot and add these commands:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
 
 
For Linux Kernel 2.6.29 and higher using DSS2
 
setenv bootcmd 'mmcinit; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
or
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; bootm 0x80300000'
 
 
DVI Port
 
setenv bootargs 'console=tty0 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro omapfb.mode=dvi:1280x720MR-16@60'
 
 
 
Serial Port
 
setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait rootfstype=ext3 ro'
 
 
saveenv
 
boot
 
  
You shall adapt the resolution to you screen as following :
+
User: debian
omapfb.mode=dvi:1280x720MR-24@60
+
pass: temppwd
Modes:
 
"1024x768MR-24@60""800x600-MR24@60" ...
 
  
Here is more explanation on dss video options : [http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=blob;f=Documentation/fb/modedb.txt;h=ec4dee75a35450376ad13442ea926eaf76de76aa;hb=HEAD]
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
The Beagleboard will reboot 3-4 times while the ext3 filesystem is repaired. (may have to remove power etc)
+
Image Updated:
 +
*2020-03-12
 +
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
  
==Debian on Beagleboard==
+
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Debian on BeagleBoard uses the following configuration:
+
Verify Image with:
 +
sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
 +
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
* Console log = Serial Terminal
+
Windows/Mac/Linux gui
* User Console = HDMI port + usb (keyboard, mouse, etc).  
+
http://etcher.io
  
If you want to log in with the serial port, you will have to add to /etc/inittab
+
Linux: (dd)
  S:2345:respawn:/sbin/getty 115200 ttyS2
+
xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
And if you want to log in as root on the serial port, add ttyS2 to /etc/securetty.
+
== BeagleBoard-X15 and BeagleBone AI==
  
Note : the beagle board I have was not configured as USB host. I had to modify it to be able to use mouse and keyboards (see [http://elinux.org/BeagleBoard#OTG]). I you do not want to do this, you'll have to install a Vnc server on the beagle to access desktop.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
==Current Issues==
+
User: debian
 +
pass: temppwd
  
#Swap disabled: change /dev/hda5 -> /dev/mmcblk0p5 in /etc/fstab (artifact of qemu install to /dev/hdaX)
+
Auto partition resize:
#RTC seems to be not enabled: use ntpdate when ethernet works, or issue
+
cd /opt/scripts/tools
  date +"%m%d%y%H%M" -s MMDDYYHHMM
+
git pull
 +
./grow_partition.sh
 +
  sudo reboot
  
[[Image:Beagleboarddebian-GNOME.jpg]]
+
Image Updated:
 +
*2020-03-12
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
==Notes==
+
Get prebuilt image:
#'fbdev' is normally *slow* since it completely relies on the system cpu to update the framebuffer. Once the video processing core's driver is released this will no longer be an issue.
+
  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
# Debian/Gnome actually need the swap to run (up to 90Mo of swap space on my beagle with 128Mo RAM shipped on it) so that it's even slower when using the SD card (try using an external hdd disk).
 
  
= Debian Configuration =
+
Verify Image with:
 +
sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
 +
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
== Serial Ports ==
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
Lenny
+
Linux: (dd)
 +
xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
edit /etc/inittab and add:
 
S:2345:respawn:/sbin/getty 115200 ttyS2
 
  
For root access over the serial port add ttyS2 to /etc/securetty
+
= Debian Configuration =
  
== fbdev Drivers ==
+
==Install Latest Kernel Image==
  
/etc/X11/xorg.conf:
+
General apt syntax for searching and installing a specific kernel:
  Section "Device"
+
  sudo apt-get update
Identifier "Configured Video Device"
+
sudo apt-cache search linux-image | grep <branch>
Option "UseFBDev" "true"
+
sudo apt-get install linux-image-<specific version>
Driver "fbdev"
+
  sudo reboot
  EndSection
 
  
== WiFi ==
+
Latest kernel script
 
+
cd /opt/scripts/tools/
See [[BeagleBoardDebianWifiInstallInfo|BeagleBoard Debian WiFi install info]].
+
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
== Xorg omapfb Drivers ==
+
== 4.19.x-ti ==
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
 +
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
  
=== Drivers ===
+
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
Note: In Debian this will eventually move from sid to squeeze: http://packages.qa.debian.org/x/xf86-video-omapfb.html  It's too late for lenny.
+
--ti-channel --lts-4_19
  
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
+
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_19
  
lenny:
+
== Mainline (4.19.x lts) ==
wget -c http://rcn-ee.homeip.net:81/dl/deb-sbuild/lenny/xorg-drivers/xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
sudo dpkg -i xserver-xorg-video-omap3_0.1.1-2_armel.deb
 
  
squeeze:
+
4.19.x BeagleBone/BeagleBone Black
  sudo apt-get install xserver-xorg-video-omap3
+
  --bone-kernel --lts-4_19
  
=== xorg.conf ===
+
  4.19.x BeagleBone/BeagleBone Black + RT
/etc/X11/xorg.conf
+
  --bone-rt-kernel --lts-4_19
 
 
Section "Monitor"
 
    Identifier "Configured Monitor"
 
EndSection
 
 
Section "Screen"
 
    Identifier "Default Screen"
 
    Device "Configured Video Device"
 
    #Limited by SGX?
 
    DefaultDepth 16
 
EndSection
 
 
Section "Device"
 
    Identifier "Configured Video Device"
 
    Driver "omapfb"
 
    Option "fb" "/dev/fb0"
 
  EndSection
 
 
 
Note: Use xvinfo to check if it works:
 
  X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc...
 
 
 
== SGX Video Acceleration ==
 
 
 
=== Kernel Modules ===
 
 
 
Lenny:
 
wget -c http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/omaplfb.ko
 
wget -c http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/pvrsrvkm.ko
 
sudo mkdir -p /lib/modules/`uname -r`/kernel/drivers/gpu/pvr/
 
sudo mv *.ko /lib/modules/`uname -r`/kernel/drivers/gpu/pvr/
 
sudo depmod -a omaplfb
 
 
 
Squeeze:
 
wget -c http://rcn-ee.net/deb/kernel/beagle/squeeze/v2.6.29-58cf2f1-oer44.1/omaplfb.ko
 
wget -c http://rcn-ee.net/deb/kernel/beagle/squeeze/v2.6.29-58cf2f1-oer44.1/pvrsrvkm.ko
 
sudo mkdir -p /lib/modules/`uname -r`/kernel/drivers/gpu/pvr/
 
sudo mv *.ko /lib/modules/`uname -r`/kernel/drivers/gpu/pvr/
 
sudo depmod -a omaplfb
 
 
 
Sid:
 
wget -c http://rcn-ee.net/deb/kernel/beagle/sid/v2.6.29-58cf2f1-oer44.1/omaplfb.ko
 
  wget -c http://rcn-ee.net/deb/kernel/beagle/sid/v2.6.29-58cf2f1-oer44.1/pvrsrvkm.ko
 
sudo mkdir -p /lib/modules/`uname -r`/kernel/drivers/gpu/pvr/
 
sudo mv *.ko /lib/modules/`uname -r`/kernel/drivers/gpu/pvr/
 
sudo depmod -a omaplfb
 
 
 
=== SDK ===
 
 
 
Make sure to use a "corporate email" : http://software-dl.ti.com/dsps/forms/export.html?prod_no=/OMAP35x_Graphics_SDK_setuplinux_3_00_00_09.bin
 
 
 
Note: the SDK will not extract directly on any arm platform, extract it first on an x86 machine and tar the resulting folder before transferring to the beagleboard.
 
 
 
System Libraries:
 
sudo ln -sf /usr/lib/libXdmcp.so.6.0.0 /usr/lib/libXdmcp.so.0
 
sudo ln -sf /usr/lib/libXau.so.6.0.0 /usr/lib/libXau.so.0
 
 
 
SDK install lib/bin from 3.00.00.09:
 
sudo mkdir /usr/lib/ES2.0
 
sudo mkdir /usr/bin/ES2.0
 
 
sudo mkdir /usr/lib/ES3.0
 
sudo mkdir /usr/bin/ES3.0
 
 
sudo cp SDK_EXT_DIR/gfx_rel_es2.x/lib* /usr/lib/ES2.0
 
sudo cp SDK_EXT_DIR/gfx_rel_es2.x/p[dv]* /usr/bin/ES2.0
 
 
sudo cp SDK_EXT_DIR/gfx_rel/lib* /usr/lib/ES3.0
 
sudo cp SDK_EXT_DIR/gfx_rel/p[dv]* /usr/bin/ES3.0
 
 
 
Older:
 
SDK lib's
 
sudo cp SDK_EXTRACTED_DIR/gfx_rel/*.so /usr/lib/
 
 
 
SDK pvrsrvinit
 
sudo cp SDK_EXTRACTED_DIR/gfx_rel/pvrsrvinit /usr/bin/
 
 
 
=== Startup Script ===
 
 
 
For 3.00.00.09
 
 
 
/etc/rcS.d/S60pvr.sh
 
 
 
#!/bin/sh
 
 
if [ "$1" = "" ]; then
 
echo PVR-INIT: Please use start, stop, or restart.
 
exit 1
 
fi
 
 
if [ "$1" = "stop" -o  "$1" = "restart" ]; then
 
echo Stopping PVR
 
rmmod omaplfb 2>/dev/null
 
rmmod pvrsrvkm 2>/dev/null
 
fi
 
 
if [ "$1" = "stop" ]; then
 
exit 0
 
fi
 
 
echo Starting PVR
 
modprobe omaplfb
 
 
pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
 
 
if [ -e /dev/pvrsrvkm ] ; then
 
rm -f /dev/pvrsrvkm
 
fi
 
 
mknod /dev/pvrsrvkm c $pvr_maj 0
 
chmod 666 /dev/pvrsrvkm
 
 
touch /etc/powervr-esrev
 
 
SAVED_ESREVISION="$(cat /etc/powervr-esrev)"
 
ES_REVISION="$(cat /proc/cpuinfo | grep "CPU revision" | awk -F: '{print $2}')"
 
 
if [ "${ES_REVISION}" != "${SAVED_ESREVISION}" ] ; then
 
echo -n "Starting SGX fixup for"
 
if [ "${ES_REVISION}" = " 3" ] ; then
 
echo " ES3.x"
 
cp -a /usr/lib/ES3.0/* /usr/lib
 
cp -a /usr/bin/ES3.0/* /usr/bin
 
else
 
echo " ES2.x"
 
cp -a /usr/lib/ES2.0/* /usr/lib
 
cp -a /usr/bin/ES2.0/* /usr/bin
 
fi
 
 
echo "${ES_REVISION}" > /etc/powervr-esrev
 
fi
 
 
/usr/bin/pvrsrvinit
 
  
For Older:
+
== Debian 9: stretch ==
 +
sudo apt-get install linux-image-armmp
  
Need devmem2:
+
Reboot with your new Kernel Image.
  
wget -c http://free-electrons.com/pub/mirror/devmem2.c
+
== Xorg Drivers ==
gcc -o devmem2 devmem2.c
 
sudo cp devmem2 /usr/local/bin
 
  
 
Script:
 
Script:
 
+
  cd /opt/scripts/tools/
/etc/rcS.d/S60pvr.sh
 
 
 
#!/bin/sh
 
 
modprobe omaplfb
 
 
pvr_maj=`grep "pvrsrvkm$" /proc/devices | cut -b1,2,3`
 
 
if [ -e /dev/pvrsrvkm ] ; then
 
    rm -f /dev/pvrsrvkm
 
fi
 
 
mknod /dev/pvrsrvkm c $pvr_maj 0
 
chmod 666 /dev/pvrsrvkm
 
 
# This is from the SDK...
 
/usr/bin/pvrsrvinit
 
 
# Set SGX to full speed
 
/usr/local/bin/devmem2 0x48004b40 w 0
 
 
 
== DSP ==
 
 
 
= Advanced =
 
 
 
== Upgrading U-boot  ==
 
 
 
Using gparted, create a new 50MB Primary fat32 Partition on a blank SD card, or use your existing fat32 partition.
 
 
 
  cd /media/disk
 
sudo wget http://rcn-ee.homeip.net:81/dl/omap/uboot/u-boot-beagleboard-2009.05+r27+gitrd363f9cb0918a1b6b92e2e20d01543d0c4f53274-r27.bin
 
sudo mv u-boot-beagleboard-2009.05+r27+gitrd363f9cb0918a1b6b92e2e20d01543d0c4f53274-r27.bin u-boot-f.bin
 
 
 
Tested --[[User:RobertCNelson|RobertCNelson]] 20:34, 12 August 2009 (UTC) RevB5 + 2.6.29-oer40.5 & RevC2 + 2.6.29-oer40.5
 
 
 
Insert SD Card, boot Beagleboard and stop U-Boot from booting
 
mmcinit (or "mmc init")
 
fatload mmc 0 0x80200000 u-boot-f.bin
 
nand unlock
 
nandecc sw
 
nand erase 80000 160000
 
nand write.i 0x80200000 80000 160000
 
reset
 
 
 
== Normal Kernel Build ==
 
 
 
Note, this is done native on the BeagleBoard...
 
 
 
GIT Checkout, Beagleboard patches, and defconfig.
 
 
 
Requires:
 
sudo aptitude install git-core gcc wget kernel-package fakeroot build-essential
 
 
 
For this example lets look at: http://cgit.openembedded.org/cgit.cgi/openembedded/commit/?id=5777be68163ae84a340a252e59069d722aa534cb
 
 
 
http://cgit.openembedded.net/cgit.cgi?url=openembedded/tree/conf/machine/include/omap3.inc&id=5777be68163ae84a340a252e59069d722aa534cb -> "oer44"
 
 
 
http://cgit.openembedded.net/cgit.cgi?url=openembedded/tree/recipes/linux/linux-omap_2.6.29.bb&id=5777be68163ae84a340a252e59069d722aa534cb -> "GIT" and "PATCHES"
 
 
 
All build that i do are logged in the build folders: http://rcn-ee.net/deb/kernel/beagle/lenny/v2.6.29-58cf2f1-oer44.1/changes.txt
 
(easier to mainitain then the old way)
 
 
 
===Retrieve the GIT checkout===
 
 
 
GIT Checkout: 58cf2f1425abfd3a449f9fe985e48be2d2555022 or Shorthand: 58cf2f1
 
 
 
git-clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
 
cd linux-omap-2.6/
 
 
or if you already downloaded it..
 
 
cd linux-omap-2.6/
 
 
  git pull
 
  git pull
 
git checkout 58cf2f1 -b v2.6.29-58cf2f1
 
git archive --format=tar --prefix=v2.6.29-58cf2f1/ v2.6.29-58cf2f1 | gzip > ../v2.6.29-58cf2f1.tar.gz
 
git checkout master
 
git branch v2.6.29-58cf2f1 -D
 
cd ..
 
 
===Copy patches and defconfig===
 
 
Open linux-omap**.bb: http://cgit.openembedded.net/cgit.cgi?url=openembedded/tree/recipes/linux/linux-omap_2.6.29.bb&id=5777be68163ae84a340a252e59069d722aa534cb
 
 
This contains 50+ patches need to form a specific (oe) Openembedded release, too keep things neat and simple for my beagle builder, I'll usually combine this into a single diff located here along with the defconfig. http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.29-58cf2f1-oer44.1/
 
 
wget http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.29-58cf2f1-oer44.1/v2.6.29-58cf2f1-oer44.1.diff
 
wget http://rcn-ee.homeip.net:81/dl/omap/beagle/v2.6.29-58cf2f1-oer44.1/defconfig
 
 
=== Build uImage ===
 
 
Extract Kernel Source
 
tar -xf v2.6.29-58cf2f1.tar.gz
 
cd v2.6.29-58cf2f1/
 
 
Apply Patch
 
patch -p1 < ../v2.6.29-58cf2f1-oer44.1.diff
 
 
Copy Defconfig
 
cp ../defconfig .config
 
 
Testing Changes
 
make menuconfig
 
 
Build uImage
 
make CROSS_COMPILE= uImage
 
  
== Build with make-kpkg ==
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Note: Use newer or patches/defconfig/git commit from previous section.
+
BeagleBone/BeagleBone Black:
 
+
cd /opt/scripts/tools/graphics/
===Install Dependencies===
+
  ./ti-tilcdc.sh
   
 
apt-get install git-core kernel-package fakeroot build-essential curl libncurses-dev uboot-mkimage
 
  
===Linux Kernel===
+
== SGX Drivers ==
  
git clone git://git2.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+
=== SGX BeagleBone/BeagleBone Black ===
cd linux-omap-2.6/
 
git checkout -b beagle <git commit>
 
  
Patch Kernel with patches you need:
+
[[BeagleBoneBlack/SGX_%2B_Qt_EGLFS_%2B_Weston|A page is dedicated for the installation and use of the graphics accelerator]].
patch -p1 < ~/dl/patches/*.patch
 
  
Setup Kernel .config
+
= Building Kernel =
make CROSS_COMPILE= distclean
 
  
Copy or Make your defconfig
+
Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
cp ~/dl/defconfig .config
 
or
 
make CROSS_COMPILE= menuconfig
 
  
Create Debian linux-image* Package
+
== Beagle/Beagle xM ==
  make-kpkg --cross_compile - clean
+
  http://eewiki.net/display/linuxonarm/BeagleBoard
fakeroot make-kpkg --cross_compile - kernel_image
 
  
Create U-boot uImage
+
== BeagleBone ==
  make CROSS_COMPILE= uImage
+
  http://eewiki.net/display/linuxonarm/BeagleBone
  
== Scripted Kernel Build ==
+
== BeagleBone Black ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
https://launchpad.net/~beagleboard-kernel
+
== Panda/Panda ES ==
 +
http://eewiki.net/display/linuxonarm/PandaBoard
  
Register on launchpad.net, install bzr
+
= Upgrading from Debian 5 to Debian 6 =
sudo apt-get install bzr
 
  
Download SRC (2.6.29)
+
[http://www.jeremycole.com/blog/2011/03/09/beagleboard-upgrading-from-debian-5-to-debian-6/ Upgrading] from Debian 5 to Debian 6 report and tutorial.
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
  
Build Kernel
+
= Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy) =
. build_kernel.sh
 
  
Build SGX Modules
+
Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...
. build_sgx_modules.sh
 
  
Build Deb File
+
sudo apt-get update ; sudo apt-get upgrade
  . build_deb.sh
+
  sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
 +
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
 +
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade

Latest revision as of 22:01, 29 May 2020

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 10 (buster)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v5.4.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.19.y -b tmp
./build_kernel.sh

Debian (buster)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz

Verify Image with:

sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz

Unpack Image:

tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
cd debian-10.3-console-armhf-2020-03-12

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Variants - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2020.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Flasher

eMMC: All BeagleBone Variants with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Variants and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX


Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

4.19.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_19
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_19

Mainline (4.19.x lts)

4.19.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_19
4.19.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_19

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

A page is dedicated for the installation and use of the graphics accelerator.

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade