Difference between revisions of "BeagleBoardDebian"

From eLinux.org
Jump to: navigation, search
m
 
(96 intermediate revisions by 7 users not shown)
Line 4: Line 4:
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
 
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 
This page is about running a (ARM EABIhf) [https://www.debian.org/ Debian] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABIhf) Debian distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]]. Debian's NetInstall will be used to install Debian onto your Beagle.
 +
 +
Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48
  
 
= Help =
 
= Help =
Line 12: Line 14:
 
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
 
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** Kernel Tree's
+
** Kernel Trees
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.14.x kernel branch]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v5.4.x kernel branch]
 +
*** [https://github.com/RobertCNelson/bb-kernel/ BeagleBone]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
 
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
  
Line 40: Line 43:
 
Device Options:
 
Device Options:
 
  BeagleBoard --dtb omap3-beagle
 
  BeagleBoard --dtb omap3-beagle
  BeagleBoard xM --dtb omap3-beagle-xm
+
  BeagleBoard-xM --dtb omap3-beagle-xm
 +
BeagleBoard-X15 --dtb am57xx-beagle-x15
 
  BeagleBone (serial) --dtb am335x-bone-serial
 
  BeagleBone (serial) --dtb am335x-bone-serial
 
  BeagleBone (video via cape) --dtb am335x-bone-video
 
  BeagleBone (video via cape) --dtb am335x-bone-video
Line 50: Line 54:
 
You will need a 1GB SD card or greater.
 
You will need a 1GB SD card or greater.
 
  Standard System : ~455MB
 
  Standard System : ~455MB
+ Desktop environment (GNOME) : ~2.9GB
 
  
== Debian Wheezy ==
+
== Debian 10 (buster) ==
  
 
Quick Install script for "board"
 
Quick Install script for "board"
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch
  
 
So For the BeagleBoard xM:
 
So For the BeagleBoard xM:
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro wheezy-armhf
+
  sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  
 
*Options:
 
*Options:
Line 66: Line 69:
 
= Demo Image =
 
= Demo Image =
  
== Debian Stable (wheezy) ==
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v5.4.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black/PocketBeagle:  Kernel v4.19.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.19.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.19.y -b tmp
 +
./build_kernel.sh
 +
 
 +
== Debian (buster) ==
  
 
Default username/password:
 
Default username/password:
Line 73: Line 87:
  
 
Image Updated:
 
Image Updated:
*2014-06-05
+
*2020-03-12
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
+
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
+
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
*2014-05-06
+
*2019-04-10
** Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
+
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
*2014-04-18
+
** BeagleBoard-X15: v4.14.108-ti-r104 kernel
** Beagle/Beagle xM: v3.13.10-armv7-x11 kernel
+
*2018-12-10
** BeagleBone/BeagleBone Black: v3.8.13-bone47 kernel
+
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
 +
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
 +
** BeagleBoard-X15: v4.14.79-ti-r84 kernel
  
 
Services Active:
 
Services Active:
 
  Note: Depending on your internal network these may work out of the box
 
  Note: Depending on your internal network these may work out of the box
  Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
+
  Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
  SSH, Port 22: ssh debian@arm.local (Bone: via usb) debian@192.168.7.2
+
  SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
 
  Getty, Serial Port
 
  Getty, Serial Port
  
Line 93: Line 109:
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.5-console-armhf-2014-06-05.tar.xz
+
  wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum debian-7.5-console-armhf-2014-06-05.tar.xz
+
  sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
  b49c5f4eb768df09c6adbad7a9099d0f debian-7.5-console-armhf-2014-06-05.tar.xz
+
  b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6 debian-10.3-console-armhf-2020-03-12.tar.xz
  
 
Unpack Image:
 
Unpack Image:
  tar xf debian-7.5-console-armhf-2014-06-05.tar.xz
+
  tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
  cd debian-7.5-console-armhf-2014-06-05
+
  cd debian-10.3-console-armhf-2020-03-12
 +
 
 +
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
 +
 
 +
You should see something like:
 +
 
 +
Are you sure? I don't see [/dev/idontknow], here is what I do see...
 +
 +
fdisk -l:
 +
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
 +
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 +
 +
lsblk:
 +
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
 +
sda      8:0    0 465.8G  0 disk
 +
├─sda1  8:1    0 446.9G  0 part /  '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
 +
 
 +
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
  
 
Install Image:
 
Install Image:
Line 109: Line 148:
  
 
board options:
 
board options:
*BeagleBoard Ax/Bx/Cx/Dx   - omap3-beagle
+
*BeagleBoard Ax/Bx/Cx/Dx         - omap3-beagle
*BeagleBoard xM             - omap3-beagle-xm
+
*BeagleBoard xM                   - omap3-beagle-xm
*BeagleBone/Black          - beaglebone
+
*All BeagleBone Variants          - beaglebone
*OMAP5432 uEVM             - omap5-uevm
+
*OMAP5432 uEVM                   - omap5-uevm
 +
*BeagleBoard-X15 (BeagleBone AI)  - am57xx-beagle-x15
  
 
So for the BeagleBoard xM:
 
So for the BeagleBoard xM:
Line 118: Line 158:
  
 
Advanced: Build Image:
 
Advanced: Build Image:
 
Built with a fork of project-rootstock (ARM native mode, runs directly on BeagleBoard), using a script from omap-image-builder:
 
  
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  git clone https://github.com/RobertCNelson/omap-image-builder.git
 
  cd omap-image-builder
 
  cd omap-image-builder
  git checkout v2014.06 -b tmp
+
  git checkout v2020.03 -b tmp
  
 
Stable:
 
Stable:
  
  ./RootStock-NG.sh -c rcn-ee_console_debian_stable_armhf
+
  ./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf
  
Testing:
+
= Flasher =
  
./RootStock-NG.sh -c rcn-ee_console_debian_testing_armhf
+
== eMMC: All BeagleBone Variants with eMMC ==
  
== Debian Testing (jessie) ==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 +
 
 +
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
 +
 
 +
This script will only take about 5-6 Minutes after power on.
 +
 
 +
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 +
 
 +
User: debian
 +
pass: temppwd
  
 
Image Updated:
 
Image Updated:
*2014-06-05
+
*2020-03-12
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
+
** All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
+
*2019-04-10
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
+
** All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
*2014-05-06
+
*2018-12-10
** Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
+
** All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel
** BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel
 
*2014-04-18
 
** Beagle/Beagle xM: v3.13.10-armv7-x11 kernel
 
** BeagleBone/BeagleBone Black: v3.8.13-bone47 kernel
 
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/rootfs/jessie/debian-jessie-console-armhf-2014-06-05.tar.xz
+
  wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum debian-jessie-console-armhf-2014-06-05.tar.xz
+
  sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
  d74021d08399ffd2a2c560b0dd129844 debian-jessie-console-armhf-2014-06-05.tar.xz
+
  12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Unpack image:
+
Windows/Mac/Linux gui
  tar xf debian-jessie-console-armhf-2014-06-05.tar.xz
+
  http://etcher.io
cd debian-jessie-console-armhf-2014-06-05
 
  
Then follow the directions shown above with the other images...
+
Linux: (dd)
 +
xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
= Flasher =
+
== eMMC: BeagleBoard-X15 and BeagleBone AI ==
  
== eMMC: BeagleBone Black ==
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 
 
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to the microSD card), then apply power (same procedure as the official CircuitCo images). The board should boot into Debian and begin flashing the eMMC, once completed all 4 LED's should be full ON.  Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.
 
  
 
Script for reference: (this is the script that writes to the eMMC)
 
Script for reference: (this is the script that writes to the eMMC)
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/init-eMMC-flasher.sh
+
  https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
BTW: we are only writing about 500 megabytes to the eMMC, so the script will only take about 5-6 Minutes after power on.
+
This script will only take about 5-6 Minutes after power on.
  
 
Notes:
 
Notes:
 
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
 
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
** (error -84: which may mean you've reached the max number of erase/write cycles...)
 
  
 
User: debian
 
User: debian
Line 180: Line 223:
  
 
Image Updated:
 
Image Updated:
*2014-06-05
+
*2020-03-12
** BeagleBone Black: v3.8.13-bone56 kernel
+
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
*2014-05-06
+
*2019-04-10
** BeagleBone Black: v3.8.13-bone49 kernel
+
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
*2014-04-18
+
*2018-12-10
** BeagleBone Black: v3.8.13-bone47 kernel
+
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/flasher/wheezy/BBB-eMMC-flasher-debian-7.5-console-2014-06-05-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum BBB-eMMC-flasher-debian-7.5-console-2014-06-05-2gb.img.xz
+
  sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
  6f83bada552d4afc8232c4dcc69ac396 BBB-eMMC-flasher-debian-7.5-console-2014-06-05-2gb.img.xz
+
  b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338 am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
Follow the "standard" update procedure.
+
Windows/Mac/Linux gui
  http://elinux.org/Beagleboard:Updating_The_Software
+
  http://etcher.io
  
Linux:
+
Linux: (dd)
  unxz BBB-eMMC-flasher-debian-7.5-console-2014-06-05-2gb.img.xz
+
  xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./BBB-eMMC-flasher-debian-7.5-console-2014-06-05-2gb.img of=/dev/sdX
 
  
 
= raw microSD img =
 
= raw microSD img =
Line 205: Line 247:
 
== BeagleBoard xM ==
 
== BeagleBoard xM ==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: debian
 
User: debian
Line 217: Line 259:
  
 
Image Updated:
 
Image Updated:
*2014-06-05
+
*2020-03-12
** Beagle/Beagle xM: v3.14.5-armv7-x8 kernel
+
** BeagleBoard xM: v5.4.24-armv7-x20 kernel
*2014-05-06
+
*2019-04-10
** Beagle/Beagle xM: v3.14.2-armv7-x5 kernel
+
** BeagleBoard xM: v4.19.31-armv7-x31 kernel
*2014-04-18
+
*2018-12-10
** Beagle/Beagle xM: v3.13.10-armv7-x11 kernel
+
** BeagleBoard xM: v4.19.8-armv7-x11 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/microsd/wheezy/bbxm-debian-7.5-console-2014-06-05-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum bbxm-debian-7.5-console-2014-06-05-2gb.img.xz
+
  sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
  380ccce12f5c25e7aa818fbd6cd1de6a bbxm-debian-7.5-console-2014-06-05-2gb.img.xz
+
  864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845 bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
  
Linux:
+
Linux: (dd)
  unxz bbxm-debian-7.5-console-2014-06-05-2gb.img.xz
+
  xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./bbxm-debian-7.5-console-2014-06-05-2gb.img of=/dev/sdX
 
  
== BeagleBone/BeagleBone Black ==
+
== All BeagleBone Variants and PocketBeagle==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: debian
 
User: debian
Line 249: Line 293:
  
 
Image Updated:
 
Image Updated:
*2014-06-05
+
*2020-03-12
** BeagleBone/BeagleBone Black: v3.8.13-bone56 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
*2014-05-06
+
*2019-04-10
** BeagleBone/BeagleBone Black: v3.8.13-bone49 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
*2014-04-18
+
*2018-12-10
** BeagleBone/BeagleBone Black: v3.8.13-bone47 kernel
+
** All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/microsd/wheezy/bone-debian-7.5-console-2014-06-05-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum bone-debian-7.5-console-2014-06-05-2gb.img.xz
+
  sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
  1e5bd64033de37edc8d98c791598fdb1 bone-debian-7.5-console-2014-06-05-2gb.img.xz
+
  6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
http://etcher.io
  
Linux:
+
Linux: (dd)
  unxz bone-debian-7.5-console-2014-06-05-2gb.img.xz
+
  xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
sudo dd if=./bone-debian-7.5-console-2014-06-05-2gb.img of=/dev/sdX
 
  
== OMAP5432 uEVM ==
+
== BeagleBoard-X15 and BeagleBone AI==
  
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or the win32 image program linked to on CircuitCo's wiki page.  First press and hold the boot select button (next to microSD card), then apply power (same procedure as the official CircuitCo images).  The board should boot into Debian.
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io
  
 
User: debian
 
User: debian
Line 281: Line 327:
  
 
Image Updated:
 
Image Updated:
*2014-06-05
+
*2020-03-12
** OMAP5432 uEVM: v3.15.0-rc8-armv7-lpae-x4 kernel
+
** BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
 +
*2019-04-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
 +
*2018-12-10
 +
** BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel
  
 
Get prebuilt image:
 
Get prebuilt image:
  wget https://rcn-ee.net/deb/microsd/wheezy/omap5-uevm-debian-7.5-console-2014-06-05-2gb.img.xz
+
  wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
  
 
Verify Image with:
 
Verify Image with:
  md5sum omap5-uevm-debian-7.5-console-2014-06-05-2gb.img.xz
+
  sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
  378fe68418bbebdc29e2beb0005f5752 omap5-uevm-debian-7.5-console-2014-06-05-2gb.img.xz
+
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz
 +
 
 +
Windows/Mac/Linux gui
 +
  http://etcher.io
 +
 
 +
Linux: (dd)
 +
  xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Linux:
 
unxz omap5-uevm-debian-7.5-console-2014-06-05-2gb.img.xz
 
sudo dd if=./omap5-uevm-debian-7.5-console-2014-06-05-2gb.img of=/dev/sdX
 
  
 
= Debian Configuration =
 
= Debian Configuration =
  
== Serial Ports ==
+
==Install Latest Kernel Image==
 +
 
 +
General apt syntax for searching and installing a specific kernel:
 +
sudo apt-get update
 +
sudo apt-cache search linux-image | grep <branch>
 +
sudo apt-get install linux-image-<specific version>
 +
sudo reboot
 +
 
 +
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
To start a login console on ttyO2 (the serial header next to P9), edit /etc/inittab and add:
+
== 4.19.x-ti ==
  T0:23:respawn:/sbin/getty -L ttyO2 115200 vt102
+
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
 +
  Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
  
To start a console on the USB ACM device, add the following to /etc/inittab,
+
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
  GS0:23:respawn:/sbin/getty -L ttyGS0 115200 vt102
+
  --ti-channel --lts-4_19
  
==Install Latest Kernel Image==
+
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_19
  
Script:
+
== Mainline (4.19.x lts) ==
cd /opt/scripts/tools
 
git pull
 
  
Stable:
+
  4.19.x BeagleBone/BeagleBone Black
  ./update_kernel.sh
+
--bone-kernel --lts-4_19
  
Testing:
+
  4.19.x BeagleBone/BeagleBone Black + RT
  ./update_kernel.sh --beta-kernel
+
--bone-rt-kernel --lts-4_19
  
Custom: (has to be on rcn-ee.net)
+
== Debian 9: stretch ==
  ./update_kernel.sh --kernel v3.8.13-bone37
+
  sudo apt-get install linux-image-armmp
  
 
Reboot with your new Kernel Image.
 
Reboot with your new Kernel Image.
Line 340: Line 404:
 
=== SGX BeagleBone/BeagleBone Black ===
 
=== SGX BeagleBone/BeagleBone Black ===
  
Note, these are FBDEV only, no xorg/x11/etc...
+
[[BeagleBoneBlack/SGX_%2B_Qt_EGLFS_%2B_Weston|A page is dedicated for the installation and use of the graphics accelerator]].
 
 
Install "special" Kernel
 
cd /opt/scripts/tools
 
git pull
 
./update_kernel.sh --kernel v3.13.11-bone10
 
 
 
Build SGX modules/userspace (must be done on an x86, due to the TI 5.01.01.01 blob extractor)
 
git clone https://github.com/RobertCNelson/bb-kernel.git
 
cd bb-kernel/
 
git checkout origin/am33x-v3.13 -b tmp-sgx
 
./build_kernel.sh
 
./sgx_build_modules.sh
 
 
 
Copy ./deploy/GFX_5.01.01.01.tar.gz to BeagleBone/BeagleBone Black and install
 
sudo tar xfv GFX_5.01.01.01.tar.gz -C /
 
cd /opt/gfxinstall/
 
sudo ./sgx-install.sh
 
sudo reboot
 
 
 
Verify omaplfb & pvrsrvkm loaded
 
debian@arm:~$ lsmod | grep omaplfb
 
omaplfb                12065  0
 
pvrsrvkm              178782  1 omaplfb
 
 
 
SGX Demos
 
cd /opt/gfxsdkdemos/ogles2/
 
./OGLES2ChameleonMan
 
  
 
= Building Kernel =
 
= Building Kernel =

Latest revision as of 22:01, 29 May 2020

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Note: Original Beagleboards work with the Debian Console image booted via holding user button down. Last tested 05/2020. Ref: https://github.com/beagleboard/Latest-Images/issues/48

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 10 (buster)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v5.4.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.19.y -b tmp
./build_kernel.sh

Debian (buster)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
    • BeagleBoard-X15: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/elinux/debian-10.3-console-armhf-2020-03-12.tar.xz

Verify Image with:

sha256sum debian-10.3-console-armhf-2020-03-12.tar.xz
b6f1ca53d67554d0381ca59fe9ecd50b5013a073abd2b2e133aa8be1784cdbc6  debian-10.3-console-armhf-2020-03-12.tar.xz

Unpack Image:

tar xf debian-10.3-console-armhf-2020-03-12.tar.xz
cd debian-10.3-console-armhf-2020-03-12

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Variants - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 (BeagleBone AI) - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2020.03 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Flasher

eMMC: All BeagleBone Variants with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants with eMMC: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants with eMMC: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants with eMMC: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
12a449c3426d811765e8ef0236ae3ddc74fc645a482640984435452929ebf55d  bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On boot-up the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the Ethernet jack. Progress is reported on both the serial debug and HDMI connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/flasher/am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb*
b2d4600cfbeaad90e9d634f8f9671be1223d235e6581aac82897d3f28076d338  am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-eMMC-flasher-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard xM: v5.4.24-armv7-x20 kernel
  • 2019-04-10
    • BeagleBoard xM: v4.19.31-armv7-x31 kernel
  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-10.3-console-armhf-2020-03-12-2gb*
864cd6a45179e87c68087150597e18a1c12c81621da7735ee8d5c35094423845  bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Variants and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • All BeagleBone Variants and PocketBeagle: v4.19.94-ti-r36 kernel
  • 2019-04-10
    • All BeagleBone Variants and PocketBeagle: v4.14.108-ti-r104 kernel
  • 2018-12-10
    • All BeagleBone Variants and PocketBeagle: v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum bone-debian-10.3-console-armhf-2020-03-12-2gb*
6d898c473edc8a50597ed7da8342c899d88e07b8a6b4c7c143257e947cb5f52d  bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15 and BeagleBone AI

This image can be written to a 2GB (or larger) microSD card, via 'dd' on Linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2020-03-12
    • BeagleBoard-X15 (and BeagleBone AI): v4.19.94-ti-r36 kernel
  • 2019-04-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.108-ti-r104 kernel
  • 2018-12-10
    • BeagleBoard-X15 (and BeagleBone AI): v4.14.79-ti-r84 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2020-03-12/microsd/am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Verify Image with:

sha256sum am57xx-debian-10.3-console-armhf-2020-03-12-2gb*
24bfaeac8d90ebd36790ba4c04a4117fe8c2e7aa28de5d1ff0a5ab164e32bb90  am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat am57xx-debian-10.3-console-armhf-2020-03-12-2gb.img.xz | sudo dd of=/dev/sdX


Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

4.19.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.19
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.19.y
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_19
4.19.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_19

Mainline (4.19.x lts)

4.19.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_19
4.19.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_19

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

A page is dedicated for the installation and use of the graphics accelerator.

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade