BeagleBoardDebian

From eLinux.org
Jump to: navigation, search

This page is about running a (ARM EABIhf) Debian distribution at BeagleBoard. BeagleBoard will boot the (ARM EABIhf) Debian distribution from SD card. Debian's NetInstall will be used to install Debian onto your Beagle.

Help

If you need any help:

  • When asking for help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Official BeagleBoard.org Images for shipping with BeagleBone Black

Recommended Beagle Software

Mainline U-Boot:

  • All old Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions.
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Debian NetInstall

Scripts:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Device Options:

BeagleBoard --dtb omap3-beagle
BeagleBoard-xM --dtb omap3-beagle-xm
BeagleBoard-X15 --dtb am57xx-beagle-x15
BeagleBone (serial) --dtb am335x-bone-serial
BeagleBone (video via cape) --dtb am335x-bone-video
BeagleBone Black --dtb am335x-boneblack
PandaBoard (A1->A3) --dtb omap4-panda
PandaBoard (A4->Ax) --dtb omap4-panda-a4
PandaBoard ES  --dtb omap4-panda-es

You will need a 1GB SD card or greater.

Standard System : ~455MB

Debian 9 (stretch)

Quick Install script for "board"

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb "board" --distro stretch

So For the BeagleBoard xM:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro stretch
  • Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.19.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.14.y -b tmp
./build_kernel.sh

Debian (stretch)

Default username/password:

  • username: debian
  • password: temppwd

Image Updated:

  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Varients and PocketBeagle: v4.14.79-ti-r84 kernel
    • OMAP5432 uEVM: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard xM: v4.18.7-armv7-x7 kernel
    • All BeagleBone Varients and PocketBeagle: v4.14.67-ti-r74 kernel
    • OMAP5432 uEVM: v4.14.67-ti-r74 kernel
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel
  • 2018-08-10
    • BeagleBoard xM: v4.17.12-armv7-x12 kernel
    • All BeagleBone Varients and PocketBeagle: v4.14.62-ti-r69 kernel
    • OMAP5432 uEVM: v4.14.62-ti-r69 kernel
    • BeagleBoard-X15: v4.14.62-ti-r69 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) (Windows/Linux) http://192.168.7.2, (Mac/Linux) http://192.168.6.2
SSH, Port 22: ssh debian@arm.local (Bone: via usb) (Windows/Linux) debian@192.168.7.2, (Mac/Linux) debian@192.168.6.2
Getty, Serial Port

Default user: debian pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/elinux/debian-9.6-console-armhf-2018-12-10.tar.xz

Verify Image with:

sha256sum debian-9.6-console-armhf-2018-12-10.tar.xz
dbf4e19431a64381024ca09651c3a43a377b253a13a429afc2d1fea6e8a7606f  debian-9.6-console-armhf-2018-12-10.tar.xz

Unpack Image:

tar xf debian-9.6-console-armhf-2018-12-10.tar.xz
cd debian-9.6-console-armhf-2018-12-10

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2018.12 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_debian_stretch_armhf

Testing:

./RootStock-NG.sh -c rcn-ee_console_debian_buster_armhf

Debian Testing (buster)

Image Updated:

  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
    • All BeagleBone Varients and PocketBeagle: v4.14.79-ti-r84 kernel
    • OMAP5432 uEVM: v4.14.79-ti-r84 kernel
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard xM: v4.18.7-armv7-x7 kernel
    • All BeagleBone Varients and PocketBeagle: v4.14.67-ti-r74 kernel
    • OMAP5432 uEVM: v4.14.67-ti-r74 kernel
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel
  • 2018-08-10
    • BeagleBoard xM: v4.17.12-armv7-x12 kernel
    • All BeagleBone Varients and PocketBeagle: v4.14.62-ti-r69 kernel
    • OMAP5432 uEVM: v4.14.62-ti-r69 kernel
    • BeagleBoard-X15: v4.14.62-ti-r69 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/elinux/debian-buster-console-armhf-2018-12-10.tar.xz

Verify Image with:

sha256sum debian-buster-console-armhf-2018-12-10.tar.xz
fb5e6893761544b32bbf4d2943d0760d3cbbc36aabc35b87080f8544db8e8565  debian-buster-console-armhf-2018-12-10.tar.xz

Unpack image:

tar xf debian-buster-console-armhf-2018-12-10.tar.xz
cd debian-buster-console-armhf-2018-12-10

Then follow the directions shown above with the other images...

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2018-12-10
    • All BeagleBone Varients with eMMC: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • All BeagleBone Varients with eMMC: v4.14.67-ti-r74 kernel
  • 2018-08-10
    • All BeagleBone Varients with eMMC: v4.14.62-ti-r69 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/flasher/BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb*
22351bc54ae80ac963d9c8d24c535575f8688880427a8cb3f389828379c999c9  BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Debian will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: debian pass: temppwd

Image Updated:

  • 2018-12-10
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel
  • 2018-08-10
    • BeagleBoard-X15: v4.14.62-ti-r69 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/flasher/bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb*
3fa7b989336531a27a00b9b98ce3f15f4f129b39edfd66f98883e6f1cbfad30a  bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2018-12-10
    • BeagleBoard xM: v4.19.8-armv7-x11 kernel
  • 2018-09-11
    • BeagleBoard xM: v4.18.7-armv7-x7 kernel
  • 2018-08-10
    • BeagleBoard xM: v4.17.12-armv7-x12 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/microsd/bbxm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Verify Image with:

sha256sum bbxm-debian-9.6-console-armhf-2018-12-10-2gb*
8fb1a20ff6116e41384d9728940055ca69da3e19245ac1eee97040a831ee206d  bbxm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2018-12-10
    • All BeagleBone Varients and PocketBeagle: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • All BeagleBone Varients and PocketBeagle: v4.14.67-ti-r74 kernel
  • 2018-08-10
    • All BeagleBone Varients and PocketBeagle: v4.14.62-ti-r69 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/microsd/bone-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Verify Image with:

sha256sum bone-debian-9.6-console-armhf-2018-12-10-2gb*
4a2e413a0b7a4496fb2d1a78c0cc05a521bd535642d38561a2e875da27f5a4a8  bone-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2018-12-10
    • OMAP5432 uEVM: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • OMAP5432 uEVM: v4.14.67-ti-r74 kernel
  • 2018-08-10
    • OMAP5432 uEVM: v4.14.62-ti-r69 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/microsd/omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb*
941ed74214fd343567be2151eceefc60b2551af63bf82eb4accc5859f87e9d9a  omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: debian pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2018-12-10
    • BeagleBoard-X15: v4.14.79-ti-r84 kernel
  • 2018-09-11
    • BeagleBoard-X15: v4.14.67-ti-r74 kernel
  • 2018-08-10
    • BeagleBoard-X15: v4.14.62-ti-r69 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2018-12-10/microsd/bbx15-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Verify Image with:

sha256sum bbx15-debian-9.6-console-armhf-2018-12-10-2gb*
4cc8681fe2fe839d6be007df72cf8d188338d738964da9530764b0514b0e3fb6  bbx15-debian-9.6-console-armhf-2018-12-10-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-debian-9.6-console-armhf-2018-12-10-2gb.img.xz | sudo dd of=/dev/sdX

Debian Configuration

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.14.x-ti

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.14
Based on: http://git.ti.com/gitweb/?p=ti-linux-kernel/ti-linux-kernel.git;a=shortlog;h=refs/heads/ti-linux-4.14.y
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_14
4.14.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_14

Mainline (4.14.x lts)

4.14.x BeagleBone/BeagleBone Black
--bone-kernel --lts-4_14
4.14.x BeagleBone/BeagleBone Black + RT
--bone-rt-kernel --lts-4_14

Debian 9: stretch

sudo apt-get install linux-image-armmp

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.4.x" lts/bone kernel: http://elinux.org/BeagleBoardDebian#Mainline_.284.4.x_lts.29

Build SGX userspace for 4.4.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.4 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02_es8.x.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02_es8.x.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Building Kernel

Note, this section use to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Upgrading from Debian 5 to Debian 6

Upgrading from Debian 5 to Debian 6 report and tutorial.

Upgrading from Debian 6 (Squeeze) to Debian 7 (Wheezy)

Note, this only goes over "armel" -> "armel"... For users wishing to switch from "armel" -> "armhf" just re-install...

sudo apt-get update ; sudo apt-get upgrade
sudo sed -i -e "s/squeeze/wheezy/g" /etc/apt/sources.list
sudo apt-get update ; sudo apt-get install -y apt aptitude udev dpkg
sudo aptitude update ; sudo aptitude -y safe-upgrade ; sudo aptitude -y dist-upgrade