Difference between revisions of "BeagleBoardUbuntu"

From eLinux.org
Jump to: navigation, search
m (Maverick 10.10: add package for nm applet)
m (Method 1: Download a Complete Pre-Configured Image: 2017-10-12)
(357 intermediate revisions by 15 users not shown)
Line 3: Line 3:
 
[[Category:Development Boards]]
 
[[Category:Development Boards]]
 
[[Category: BeagleBoard]]
 
[[Category: BeagleBoard]]
This page is about running a (ARM EABI) [http://www.ubuntu.com/ Ubuntu] distribution at [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from [[BeagleBoard#MMC.2FSD_boot|SD card]].
+
''(For BeagleBoardAngstrom, click [[BeagleBoardAngstrom|here]].)''
 +
''(Should [[Beagleboard:Ubuntu On BeagleBone Black]] be merged into this page?)''
  
Note: for the best experience, make sure you have an LCD attached to the HDMI port, 2GB/4GB/8GB SD card, and a known good usb2.0 hub with mouse and keyboard.
+
This page is about running a Linux distribution (ARM [https://wiki.debian.org/ArmEabiPort EABI]) [http://www.ubuntu.com/ Ubuntu] on the [[BeagleBoard]]. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the [[BeagleBoard#MMC.2FSD_boot|SD card]]. Since much of this page is generic, it has also been extended to help support devices such as the [[PandaBoard]] and [[BeagleBone]].
 +
 
 +
* For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.
  
 
= Help =
 
= Help =
Line 12: Line 15:
  
 
*Kernel related help:
 
*Kernel related help:
** [http://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
+
** [https://groups.google.com/group/beagleboard Email Beagleboard user group] *Recommended method
** ''#beagle'': Beagle irc on freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
+
** ''#beagle'': Beagle IRC on Freenode, accessible also by [http://beagleboard.org/discuss web interface] ([http://www.beagleboard.org/irclogs/index.php logs])
** [https://launchpad.net/~beagleboard-kernel Launchpad Project "Beagleboard Kernel"]
+
** Kernel Trees
*** [https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable Stable Kernel 2.6.37 src]
+
*** [https://github.com/RobertCNelson/armv7-multiplatform/ v3.17.x kernel branch]
*** [https://github.com/RobertCNelson/2.6.38-devel Development Kernel src]
+
*** [https://github.com/RobertCNelson/linux-dev Development Kernel source code]
** [http://elinux.org/BeagleBoardUbuntuKernel Kernel Testing Results]
 
  
 
*Ubuntu related help:
 
*Ubuntu related help:
** ''#ubuntu-arm'': Ubuntu's arm irc on freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
+
** ''#ubuntu-arm'': Ubuntu's ARM IRC on Freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
  
*When asking for help, please provide some debugging information:
+
*When requesting help, please provide some debugging information:
 
** U-Boot Version installed on board
 
** U-Boot Version installed on board
 
** Kernel Version: uname -a
 
** Kernel Version: uname -a
Line 30: Line 32:
 
= Required Beagle Software =  
 
= Required Beagle Software =  
  
X-loader/MLO (1.4.4ss) & U-Boot (2010.03) (Zippy1 & Zippy2 Support)
+
Mainline U-Boot:
* All Bx, C2/3/4 Boards are required to upgrade to atleast these MLO and U-Boot versions.
+
* All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
* XM Boards have no NAND, so u-boot.bin is always required on the first partition
+
* XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 
* Directions: [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
  
Line 52: Line 54:
 
  exec /sbin/getty 115200 ttyO2
 
  exec /sbin/getty 115200 ttyO2
  
= Canonical Pre-Installed Images =
+
= Method 1: Download a Complete Pre-Configured Image =
  
Support:
+
== Demo Image ==
* ''#ubuntu-arm'': Ubuntu's arm irc on freenode ([http://irclogs.ubuntu.com/ logs] -> year -> month -> day -> #ubuntu-arm.html)
 
  
== Maverick 10.10 ==
+
* '''Advanced Users only''': BeagleBoard xM: Kernel source, used in these demo images: https://github.com/RobertCNelson/armv7-multiplatform
 +
git clone https://github.com/RobertCNelson/armv7-multiplatform.git
 +
cd armv7-multiplatform
 +
git checkout origin/v4.13.x -b tmp
 +
./build_kernel.sh
 +
* '''Advanced Users only''': BeagleBone/BeagleBone Black:  Kernel v4.9.x source, used in these demo images: https://github.com/RobertCNelson/ti-linux-kernel-dev/tree/ti-linux-4.9.y
 +
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
 +
cd ti-linux-kernel-dev
 +
git checkout origin/ti-linux-4.9.y -b tmp
 +
./build_kernel.sh
  
Just follow https://wiki.ubuntu.com/ARM/OMAPMaverickInstall and make sure you're using a SD card >= 4GB.
+
=== Ubuntu (16.04.3) ===
  
=Demo Image=
+
Default username/password:
 +
*username: ubuntu
 +
*password: temppwd
  
Note, these Demo Images contain a custom kernel from rcn-ee.net. If you'd like to use ubuntu's 'kernel' edit "/etc/flash-kernel.conf" disable the rcn-ee kernel variable then install flash-kernel which should bring ubuntu's kernel with it. Once you do this, it's not trivial to reverse the process.. For example, what are some of the differences? Ubuntu does not support the xM with lucid, with the rcn-ee.net kernel that's possible and done with the lucid image below..
+
Image Updated:
 +
*2017-10-12
 +
** BeagleBoard xM: v4.13.5-armv7-x1 kernel
 +
** All BeagleBone Varients and PocketBeagle: v4.9.54-ti-r68 kernel
 +
** OMAP5432 uEVM: v4.9.54-ti-r68 kernel
 +
** BeagleBoard-X15: v4.9.54-ti-r68 kernel
 +
*2017-09-21
 +
** BeagleBoard xM: v4.13.3-armv7-x1 kernel
 +
** All BeagleBone Varients and PocketBeagle: v4.4.88-ti-r125 kernel
 +
** OMAP5432 uEVM: v4.4.88-ti-r125 kernel
 +
** BeagleBoard-X15: v4.4.88-ti-r125 kernel
 +
*2017-09-14
 +
** BeagleBoard xM: v4.13.2-armv7-x1 kernel
 +
** All BeagleBone Varients: v4.4.87-ti-r121 kernel
 +
** OMAP5432 uEVM: v4.4.87-ti-r121 kernel
 +
** BeagleBoard-X15: v4.4.87-ti-r121 kernel
  
If the script in these demo images fail: email "bugs@rcn-ee.com" I need: terminal command, terminal log, distribution name, arch...
+
Services Active:
 +
Note: Depending on your internal network these may work out of the box
 +
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
 +
SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2
 +
Getty, Serial Port
  
== Maverick 10.10 ==
+
Default user: ubuntu pass: temppwd
 
 
Image Updated March 4th, new 2.6.37.2 kernel, ttyO2 serial console...
 
 
 
Default user: ubuntu pass: temppwd  
 
  
 
Get prebuilt image:
 
Get prebuilt image:
 +
wget https://rcn-ee.com/rootfs/2017-10-12/elinux/ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz
  
wget http://rcn-ee.net/deb/rootfs/maverick/ubuntu-10.10-r5-minimal-armel.tar.xz
+
Verify Image with:
mirrors (will take some time to update):
+
  sha256sum ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz
  wget http://ynezz.ibawizard.net/beagleboard/maverick/ubuntu-10.10-r5-minimal-armel.tar.xz
+
  817cdaa038b4847862ce0715c982224ef9671d5938854e9d47d2c50b32a7e5de  ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz
wget http://vivaphp.net/beagle/maverick/ubuntu-10.10-r5-minimal-armel.tar.xz
 
 
 
Verify Image with:
 
  md5sum ubuntu-10.10-r5-minimal-armel.tar.xz
 
f296ff6ddb7cbcafa4b5303b19a39d3b  ubuntu-10.10-r5-minimal-armel.tar.xz
 
  
 
Unpack Image:
 
Unpack Image:
  tar xJf ubuntu-10.10-r5-minimal-armel.tar.xz
+
  tar xf ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz
  cd ubuntu-10.10-r5-minimal-armel
+
  cd ubuntu-16.04.3-console-armhf-2017-10-12
  
Install Image:
+
If you don't know the location of your SD card:
 +
sudo ./setup_sdcard.sh --probe-mmc
  
Quick Install script for Beagle Bx, C2/C3/C4, xM Ax, xM B
+
You should see something like:
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle
 
  
Quick Install script for Panda (no video support, only serial console)
+
Are you sure? I don't see [/dev/idontknow], here is what I do see...
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot panda
+
 
+
  fdisk -l:
Quick Install script for igepv2 (no video support, only serial console, dvi regression on me..)
+
Disk /dev/sda: 500.1 GB, 500107862016 bytes '''<- x86 Root Drive'''
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot igepv2
+
Disk /dev/sdd: 3957 MB, 3957325824 bytes '''<- MMC/SD card'''
 
+
*Additional Options
+
lsblk:
** --rootfs <ext4 default>
+
NAME  MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
** --swap_file <swap file size in MB's>
+
sda      8:0    0 465.8G  0 disk
** --addon <pico>
+
  ├─sda1  8:1    0 446.9G  0 part / '''<- x86 Root Partition'''
 +
├─sda2  8:2    0    1K  0 part
 +
└─sda5  8:5    0  18.9G  0 part [SWAP]
 +
sdd      8:48  1  3.7G  0 disk
 +
├─sdd1  8:49  1    64M  0 part
 +
└─sdd2  8:50  1  3.6G  0 part
  
You should now be able to unmount the SD card from you PC, insert into your BeagleBoard, reboot and have Ubuntu Maverick loaded.
+
* In this example, we can see via mount, '''/dev/sda1''' is the x86 rootfs, therefore '''/dev/sdd''' is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...
 
 
For a full gui install run this on your beagle (make sure network is setup):
 
Ethernet: "sudo ifconfig -a" and "sudo dhclient usb1" or "sudo dhclient eth0"
 
Wireless: http://elinux.org/BeagleBoardUbuntu#Wifi_Networking_.28command_line.29
 
sudo apt-get update
 
sudo apt-get install xfce4 gdm xubuntu-gdm-theme xubuntu-artwork xserver-xorg-video-omap3 network-manager
 
 
 
Advanced: Build Image:
 
 
 
fixup.sh: http://rcn-ee.homeip.net:81/dl/updates/omap-image-builder/tools/fixup.sh
 
 
 
Built with rootstock trunk (ARM native mode, run directly on beagleboard):
 
sudo ./rootstock --fqdn omap --imagesize 2G --dist maverick --serial ttyO2 \
 
--login ubuntu --password temppwd \
 
--seed btrfs-tools,devmem2,i2c-tools,nano,pastebinit,uboot-envtools,uboot-mkimage,usbutils,wget,wireless-tools,wpasupplicant \
 
--script fixup.sh --components "main universe multiverse" \
 
--kernel-image http://rcn-ee.net/deb/maverick/v2.6.37.2-x3/linux-image-2.6.37.2-x3_1.0maverick_armel.deb
 
 
 
== Natty 11.04 Development ==
 
 
 
11.04: Alpha-3
 
Image Updated March 4th, new 2.6.37.2 kernel, ttyO2 serial console...
 
Default user: ubuntu pass: temppwd
 
 
 
Get prebuilt image:
 
 
 
wget http://rcn-ee.net/deb/rootfs/natty/ubuntu-natty-alpha3-r0-minimal-armel.tar.xz
 
mirrors (will take some time to update):
 
wget http://ynezz.ibawizard.net/beagleboard/natty/ubuntu-natty-alpha3-r0-minimal-armel.tar.xz
 
 
 
Verify Image with:
 
md5sum ubuntu-natty-alpha3-r0-minimal-armel.tar.xz
 
fcbc915aca87ccdf1097748773019b8b  ubuntu-natty-alpha3-r0-minimal-armel.tar.xz
 
 
 
Unpack Image:
 
tar xJf ubuntu-natty-alpha3-r0-minimal-armel.tar.xz
 
cd ubuntu-natty-alpha3-r0-minimal-armel
 
  
 
Install Image:
 
Install Image:
  
Quick Install script for Beagle Bx, C2/C3/C4, xM Ax, xM B
+
Quick install script for [board]
  sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot beagle
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board
 
 
Quick Install script for Panda (no video support, only serial console)
 
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot panda
 
 
 
Quick Install script for igepv2 (no video support, only serial console, dvi regression on me..)
 
sudo ./setup_sdcard.sh --mmc /dev/sdX --uboot igepv2
 
 
 
*Additional Options
 
** --rootfs <ext4 default>
 
** --swap_file <swap file size in MB's>
 
** --addon <pico>
 
  
You should now be able to unmount the SD card from you PC, insert into your BeagleBoard, reboot and have Ubuntu Maverick loaded.
+
board options:
 +
*BeagleBoard Ax/Bx/Cx/Dx          - omap3-beagle
 +
*BeagleBoard xM                  - omap3-beagle-xm
 +
*All BeagleBone Varients          - beaglebone
 +
*OMAP5432 uEVM                    - omap5-uevm
 +
*BeagleBoard-X15                  - am57xx-beagle-x15
  
For a full gui install run this on your beagle (make sure network is setup):
+
So for the BeagleBoard xM:
  Ethernet: "sudo ifconfig -a" and "sudo dhclient usb1" or "sudo dhclient eth0"
+
  sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm
Wireless: http://elinux.org/BeagleBoardUbuntu#Wifi_Networking_.28command_line.29
 
sudo apt-get update
 
sudo apt-get install xfce4 gdm xubuntu-gdm-theme xubuntu-artwork xserver-xorg-video-omap3
 
  
 
Advanced: Build Image:
 
Advanced: Build Image:
  
fixup.sh: http://rcn-ee.homeip.net:81/dl/updates/omap-image-builder/tools/fixup.sh
+
git clone https://github.com/RobertCNelson/omap-image-builder.git
 +
cd omap-image-builder
 +
git checkout v2017.10 -b tmp
  
Built with rootstock trunk (ARM native mode, run directly on beagleboard):
+
Stable:
sudo ./rootstock --fqdn omap --imagesize 2G --dist natty --serial ttyO2 \
 
--login ubuntu --password temppwd \
 
--seed btrfs-tools,devmem2,i2c-tools,nano,pastebinit,uboot-envtools,uboot-mkimage,usbutils,wget,wireless-tools,wpasupplicant \
 
--script fixup.sh --components "main universe multiverse" \
 
--kernel-image http://rcn-ee.net/deb/natty/v2.6.37.2-x3/linux-image-2.6.37.2-x3_1.0natty_armel.deb
 
  
= NetInstall Method =
+
./RootStock-NG.sh -c rcn-ee_console_ubuntu_xenial_armhf
  
You will need a 1GB/2GB SD card or greater.
+
== Flasher ==
Standard System : ~700MB
 
  
== Ubuntu 10.10 (Maverick) ==
+
=== eMMC: All BeagleBone Varients with eMMC ===
  
git clone git://github.com/RobertCNelson/netinstall-omap.git
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
  cd netinstall-omap
 
  ./mk_mmc.sh --mmc /dev/sdX --uboot beagle --distro maverick
 
  
*Options:
+
Script for reference: (this is the script that writes to the eMMC)
**--uboot : beagle, (panda only serial, display not working)
+
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
**--distro : maverick
 
**--firmware : installs firmware
 
**--serial-mode : debian-installer uses Serial Port
 
**--usb-rootfs : (uImage on /dev/mmcblkp0 and rootfs on external usb drive /dev/sda1)
 
  
Note: The default options work for most people, but if you'd like to tweak boot settings, edit these before running the script.
+
This script will only take about 5-6 Minutes after power on.
 
NetInstall boot Settings:
 
gedit ./netinstall-omap/scripts/dvi.cmd
 
gedit ./netinstall-omap/scripts/serial.cmd
 
 
Normal Boot Settings:
 
gedit ./netinstall-omap/scripts/dvi-normal-maverick.cmd
 
gedit ./netinstall-omap/scripts/serial-normal-maverick.cmd
 
  
Place SD card into Beagle and boot:
+
Notes:
 +
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
 +
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
Configure the network:
+
User: ubuntu
usb0: USB net <- (usually the OTG port, but could also be the smsc95xx adapter on the beagle and panda)
+
pass: temppwd
usb1: USB net <- (usually the smsc95xx adapter on the beagle and panda, when usb0 exist)
 
eth0: Ethernet <- Your usb-ethernet device
 
wlan0: Wifi <- Your usb-wifi device..
 
  
Troubshooting: If boot fails..
+
Image Updated:
*Hold the user button down to force booting from MMC
+
*2017-10-12
*Upgrade X-loader and U-boot [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
+
** All BeagleBone Varients with eMMC: v4.9.54-ti-r68 kernel
*Clear U-boot's Environment Variables in nand:
+
*2017-09-21
nand erase 260000 20000
+
** All BeagleBone Varients with eMMC: v4.4.88-ti-r125 kernel
 +
*2017-09-14
 +
** All BeagleBone Varients with eMMC: v4.4.87-ti-r121 kernel
  
NetInstall assumptions:
+
Get prebuilt image:
  Continue with out Kernel Modules <yes>
+
  wget https://rcn-ee.com/rootfs/2017-10-12/flasher/BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
Partition <Guided - use the largest continuous free space>
 
  
= Build an Ubuntu root file system with RootStock=
+
Verify Image with:
 +
sha256sum BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
 +
aff57d1c34e114f7ad90911a7068d30e88079c1e77efdf502ac60cb7091bbddd  BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  
== Install RootStock ==
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
This is based off Ubuntu's RootStock Project; [https://launchpad.net/project-rootstock RootStock] script.
+
Linux: (dd)
 +
xzcat BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Maverick (10.10)
+
=== eMMC: BeagleBoard-X15 ===
sudo apt-get install rootstock
 
  
Lucid (10.04) (use rootstock trunk)
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io  First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.
sudo apt-get install rootstock (to install rootstock's dependices)
 
  bzr branch lp:project-rootstock
 
cd project-rootstock
 
  
== RootStock ==
+
Script for reference: (this is the script that writes to the eMMC)
 +
https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh
  
=== RootStock: Useful seed Packages ===
+
This script will only take about 5-6 Minutes after power on.
  
Useful Packages:
+
Notes:
linux-firmware,wireless-tools :wifi adapters..
+
* If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
ntpdate :sync real time clock from network
+
* If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.
  
GUI's (broken bug: FIXME)
+
User: ubuntu
xfce4: xfce4,gdm,xubuntu-gdm-theme,xubuntu-artwork
+
pass: temppwd
  
=== RootStock: Running ===
+
Image Updated:
 +
*2017-10-12
 +
** BeagleBoard-X15: v4.9.54-ti-r68 kernel
 +
*2017-09-21
 +
** BeagleBoard-X15: v4.4.88-ti-r125 kernel
 +
*2017-09-14
 +
** BeagleBoard-X15: v4.4.87-ti-r121 kernel
  
Rootstock Command line:
+
Get prebuilt image:
  sudo ./rootstock --fqdn <hostname> --login <rootuser> --password <rootuserpasswd> --imagesize <qemu image size> \
+
  wget https://rcn-ee.com/rootfs/2017-10-12/flasher/bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
--seed <packages> --dist <lucid/maverick> --serial <ttySx>  --kernel-image <http>
 
  
Basic Maverick (10.10) Beagleboard minimal image:
+
Verify Image with:
  sudo ./rootstock --fqdn omap --login ubuntu --password temppwd --imagesize 2G \
+
  sha256sum bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
--seed wget,nano,linux-firmware,wireless-tools,usbutils --dist maverick --serial ttyO2 \
+
  6915b3d1d930e48604dbd0d0a8a48b5cd2139cea5cc2281665bb411e03c1b9ec bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  --components "main universe multiverse" \
 
  --kernel-image http://rcn-ee.net/deb/maverick/v2.6.37.2-x3/linux-image-2.6.37.2-x3_1.0maverick_armel.deb
 
  
Upon Completion, you should have:
+
Windows/Mac/Linux gui
  armel-rootfs-<date>.tgz  -> Root file System, dump to ext2/3 partition of SD card
+
  http://etcher.io
vmlinuz-2.6.<version>    -> Boot Image, use mkimage to create uImage and dump to the first fat16 partition of SD card
 
initrd.img-2.6.<version> -> Boot initramfs, use mkimage to create uInitrd and dump to the first fat16 partition of SD card
 
  
= Manually Setup SD Card =
+
Linux: (dd)
 +
xzcat bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX
  
For this section, you can use the files from above:
+
== raw microSD img ==
Demo Images: http://elinux.org/BeagleBoardUbuntu#Demo_Image
 
Rootstock: http://elinux.org/BeagleBoardUbuntu#Build_an_Ubuntu_root_file_system_with_RootStock
 
  
== Partition SD Card ==
+
=== BeagleBoard xM ===
You will need a 1GB SD card or greater.
 
Standard Console System : ~286MB
 
+ Desktop environment (lxde,gdm) : ~479MB
 
  
Starting with an empty SD card and using gparted, create:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
50 MiB Primary Partition, fat16/fat32
 
Rest as ext2/ext3/ext4/btrfs
 
  
Note: The boot partition can be hard to make bootable at times, here's a quick command line:
+
User: ubuntu
 +
pass: temppwd
  
First blank the MMC card's partition table with parted: (/dev/sdX as an example)
+
Auto partition resize:
  sudo parted -s /dev/sdX mklabel msdos
+
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
  sudo reboot
  
Then create the new boot partition:
+
Image Updated:
sudo fdisk /dev/sdX << MMC_END
+
*2017-10-12
n
+
** BeagleBoard xM: v4.13.5-armv7-x1 kernel
p
+
*2017-09-21
1
+
** BeagleBoard xM: v4.13.3-armv7-x1 kernel
1
+
*2017-09-14
+64M
+
** BeagleBoard xM: v4.13.2-armv7-x1 kernel
t
 
e
 
p
 
w
 
MMC_END
 
  
Notes:
+
Get prebuilt image:
  GNU Fdisk doesn't and won't work...
+
  wget https://rcn-ee.com/rootfs/2017-10-12/microsd/bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
fdisk (util-linux-ng 2.18.x) (just Fedora) add: "-c=dos -u=cylinders" ... "sudo fdisk -c=dos -u=cylinders /dev/sdX"
 
  
Make sure to set the partition boot flag
+
Verify Image with:
  sudo parted --script /dev/sdX set 1 boot on
+
  sha256sum bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
 +
d7f75e185eff52be95a6a010ebdb3680bcd4b19f6cae54ac9ca82c1a6187296e  bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  
And format it as vfat:
+
Windows/Mac/Linux gui
  sudo mkfs.vfat -F 16 /dev/sdX1
+
  http://etcher.io
  
The rootfs partition, doesn't need any special options, so just use fdisk, gparted, etc to create and format your rootfs partition..
+
Linux: (dd)
 +
xzcat bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX
  
Gparted Example: http://nishanthmenon.blogspot.com/2008/08/how-to-boot-beagle.html
+
=== All BeagleBone Varients and PocketBeagle===
  
For Reference:
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
Disk /dev/sdd: 2038 MB, 2038431744 bytes
 
255 heads, 63 sectors/track, 247 cylinders
 
Units = cylinders of 16065 * 512 = 8225280 bytes
 
Disk identifier: 0x0008e471
 
 
    Device Boot      Start        End      Blocks  Id  System
 
/dev/sdd1              1          6      48163+  6  FAT16
 
/dev/sdd2              7        247    1935832+  83  Linux
 
  
== Boot Partition ==
+
User: ubuntu
 +
pass: temppwd
  
Requirements:
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
sudo apt-get install uboot-mkimage
+
Image Updated:
Mount the fatfs partition of your SD card.
+
*2017-10-12
 +
** All BeagleBone Varients and PocketBeagle: v4.9.54-ti-r68 kernel
 +
*2017-09-21
 +
** All BeagleBone Varients and PocketBeagle: v4.4.88-ti-r125 kernel
 +
*2017-09-14
 +
** All BeagleBone Varients and PocketBeagle: v4.4.87-ti-r121 kernel
  
Mount such as: (/dev/sdX1 is the fat Boot Partition)
+
Get prebuilt image:
mkdir -p ./tmp
+
wget https://rcn-ee.com/rootfs/2017-10-12/microsd/bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
sudo mount /dev/sdX1 ./tmp
 
  
=== MLO and U-Boot ===
+
Verify Image with:
 +
sha256sum bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
 +
d8cb91fb46a72c96bbb1daef694b17c9e358e782358f3b61c813fe85340c5403  bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  
Download and copy MLO and U-Boot from here:
+
Windows/Mac/Linux gui
  http://www.angstrom-distribution.org/demo/beagleboard/
+
  http://etcher.io
  
  First copy "MLO-beagleboard-1.44+rX+gitX-rX" as MLO to the Boot Partition
+
Linux: (dd)
Then copy "u-boot-beagleboard-20XX.XX+r62+gitX-rX.bin" as u-boot.bin to the Boot Partition
+
  xzcat bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX
  
=== U-Boot uImage and uInitrd ===
+
=== OMAP5432 uEVM ===
  
U-Boot needs a compatible kernel image to boot.  To do this, we are using mkimage from (uboot-mkimage) to create an image from the vmlinuz kernel file.  
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
  
mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n "Linux" -d ./vmlinuz-* ./uImage
+
User: ubuntu
Copy "uImage" to the Boot Partition
+
pass: temppwd
  
Next create a uInird (this contains a script to fix the rtc on boot, otherwise fsck/reboot/fsck/reboot/repeat happens..)
+
Auto partition resize:
 +
cd /opt/scripts/tools
 +
git pull
 +
./grow_partition.sh
 +
sudo reboot
  
mkimage -A arm -O linux -T ramdisk -C none -a 0 -e 0 -n initramfs -d ./initrd.img-* ./uInitrd
+
Image Updated:
Copy "uInitrd" to the Boot Partition
+
*2017-10-12
 +
** OMAP5432 uEVM: v4.9.54-ti-r68 kernel
 +
*2017-09-21
 +
** OMAP5432 uEVM: v4.4.88-ti-r125 kernel
 +
*2017-09-14
 +
** OMAP5432 uEVM: v4.4.87-ti-r121 kernel
  
=== U-Boot Boot Scripts ===
+
Get prebuilt image:
The version of U-Boot installed or recommended to install uses boot scripts by default. This allows users to easily switch between multiple SD cards with different OS's with different parameters installed. Ubuntu/Debian requires a slight modification to the bootargs line vs. Angstrom, 'ro' vs 'rw'.
+
wget https://rcn-ee.com/rootfs/2017-10-12/microsd/omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  
fixrtc: (only uInitrd) Resets RTC based on last mount
+
Verify Image with:
  buddy=${buddy}: (both) Kernel Zippy1/2 Support
+
  sha256sum omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
  mpurate=${mpurate}: (recommended core clock)
+
  7c4ea606375de3ef648f67d85c3b1448c24ce80b30000b0c3b29e3f22591327a  omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  
==== Beagle Bx/Cx ====
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
create a new file: boot.cmd
+
Linux: (dd)
  setenv dvimode 1280x720MR-16@60
+
  xzcat omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX
setenv vram 12MB
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 uInitrd; bootm 0x80300000 0x81600000'
 
setenv bootargs console=ttyO2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=${vram} omapfb.mode=dvi:${dvimode} fixrtc buddy=${buddy} mpurate=${mpurate}
 
boot
 
  
==== Beagle xM ====
+
=== BeagleBoard-X15 ===
kernel limitation, randomly hardlocks at 1Ghz, can only run at 800Mhz till the dvs patches hit upstream..
 
  
create a new file: boot.cmd
+
This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io
setenv mpurate 800
 
setenv dvimode 1280x720MR-16@60
 
setenv vram 12MB
 
setenv bootcmd 'mmc init; fatload mmc 0:1 0x80300000 uImage; fatload mmc 0:1 0x81600000 uInitrd; bootm 0x80300000 0x81600000'
 
setenv bootargs console=ttyO2,115200n8 console=tty0 root=/dev/mmcblk0p2 rootwait ro vram=${vram} omapfb.mode=dvi:${dvimode} fixrtc buddy=${buddy} mpurate=${mpurate}
 
boot
 
  
Use mkimage create to actual *.scr file for U-Boot:
+
User: ubuntu
 +
pass: temppwd
  
  mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Ubuntu" -d ./boot.cmd ./boot.scr
+
Auto partition resize:
  Copy "boot.scr" to the Boot Partition
+
  cd /opt/scripts/tools
  For "igepv2" users, rename this to "boot.ini"
+
git pull
 +
  ./grow_partition.sh
 +
  sudo reboot
  
Umount the Boot Partition:
+
Image Updated:
 +
*2017-10-12
 +
** BeagleBoard-X15: v4.9.54-ti-r68 kernel
 +
*2017-09-21
 +
** BeagleBoard-X15: v4.4.88-ti-r125 kernel
 +
*2017-09-14
 +
** BeagleBoard-X15: v4.4.87-ti-r121 kernel
  
  sudo umount ./tmp
+
Get prebuilt image:
 +
  wget https://rcn-ee.com/rootfs/2017-10-12/microsd/bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  
== RootFS Partition ==
+
Verify Image with:
Root File System
+
sha256sum bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
 +
18500108ce8c4e861e0a707ea3003659aa1b28960db6bb09ed34df2319d7d253  bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz
  
Mount your SD card's larger root file system partition (assuming /dev/sdX2) and 'untar' the rootfs into it.
+
Windows/Mac/Linux gui
 +
http://etcher.io
  
  mkdir -p ./tmp
+
Linux: (dd)
sudo mount /dev/sdX2 ./tmp
+
  xzcat bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX
sudo tar xfp armel-rootfs-*.tgz -C ./tmp
 
sudo umount ./tmp
 
  
== Ubuntu Bugs & Tweaks ==
+
= Method 2: Use the NetInstall method=
  
===Enable Network Access===
+
You will need a 1GB/2GB/4GB/8GB SD card or greater.
 +
Standard system : ~700&nbsp;MB
  
Modify /etc/network/interfaces
+
Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues
auto eth0
+
(anywhere else will be ignored..)
iface eth0 inet dhcp
 
  
Manual: From the Command line
+
Download the netinstall script:
  sudo ifconfig -a
+
  git clone https://github.com/RobertCNelson/netinstall.git
sudo dhclient ethX (or wlanX/etc..)
+
cd netinstall
  
Additional Network Setup Information can be found [[BeagleBoardUbuntuNetwork|HERE]]
+
Currently supported Ubuntu distributions:
 +
--distro oneiric (11.10)
 +
--distro precise-armhf (12.04)
 +
--distro quantal (12.10)
 +
--distro raring (13.04)
 +
--distro saucy (13.10)
  
= Advanced =
+
Device: <board> selection:
 +
*BeagleBoard Ax/Bx/Cx  - omap3-beagle
 +
*BeagleBoard xMA/B/C  - omap3-beagle-xm
 +
*BeagleBone Ax        - am335x-bone-serial
 +
*BeagleBone (DVI cape) - am335x-bone-video
 +
*BeagleBone Black      - am335x-boneblack
 +
*PandaBoard Ax    - omap4-panda
 +
*PandaBoard A4+    - omap4-panda-a4
 +
*PandaBoard ES    - omap4-panda-es
  
==Install Latest Kernel Image==
+
Installation script for new <board> selection: (slowly migrating all devices to this method)
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>
  
===Script File===
+
So for the xM: with quantal:
 +
sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
  
Latest Stable is : https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
+
*Other Options:
 +
**--firmware : installs firmware
 +
**--serial-mode : debian-installer uses Serial Port
  
export DIST=maverick  (options are lucid/maverick/squeeze)
+
Place SD card into BeagleBoard and boot:
wget http://rcn-ee.net/deb/${DIST}/LATEST
 
wget $(cat ./LATEST | grep STABLE | awk '{print $3}')
 
/bin/bash install-me.sh
 
  
Reboot with your new uImage
+
Configure the network:
 +
usb0: USB net <- (usually the OTG port)
 +
eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
 +
wlan0: Wifi <- Your USDB-Wi-Fi device..
  
== Upgrade X-loader and U-boot ==
+
See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu
 
 
Compatible with Bx,C2/3/4
 
 
 
Requires MMC card..
 
 
 
git clone git://github.com/RobertCNelson/flash-omap.git
 
cd flash-omap
 
./mk_mmc.sh --mmc /dev/sdX (i.e. use /dev/sdc - the entire device, not a partition)
 
 
 
1: Place MMC card in Beagle
 
2: Push/Hold User Button Down
 
3: Apply Power
 
4: After U-boot loads, Let Off User Button
 
5: Wait for Flashing to end
 
6: Power down, remove/edit boot.scr from MMC card
 
 
 
Example 4G card:
 
 
 
sudo fdisk -l
 
 
 
Disk '''/dev/sde''': 3957 MB, 3957325824 bytes
 
255 heads, 63 sectors/track, 481 cylinders
 
Units = cylinders of 16065 * 512 = 8225280 bytes
 
Sector size (logical/physical): 512 bytes / 512 bytes
 
I/O size (minimum/optimal): 512 bytes / 512 bytes
 
Disk identifier: 0x00080e99
 
 
    Device Boot      Start        End      Blocks  Id  System
 
'''/dev/sde'''1  *          1          9      72261    e  W95 FAT16 (LBA)
 
 
 
./mk_mmc.sh --mmc /dev/sde
 
 
 
Worst case, depending on what's actually in NAND, you might still have to stop and do this:
 
  
 +
Troubleshooting: If booting fails..
 +
*Hold the user button down to force booting from MMC
 +
*Upgrade X-loader and U-boot [http://elinux.org/BeagleBoardUbuntu#Upgrade_X-loader_and_U-boot Upgrade X-loader and U-Boot]
 +
*Clear U-boot's Environment Variables in NAND:
 
  nand erase 260000 20000
 
  nand erase 260000 20000
reset
 
  
===Manual Run===
+
NetInstall assumptions:
mmc init
+
  Assume asll <default>'s... Thanks you preseed.conf!!!
fatload mmc 0:1 0x80200000 MLO
 
  nand unlock
 
nand ecc hw
 
nandecc hw
 
nand erase 0 80000
 
nand write 0x80200000 0 20000
 
nand write 0x80200000 20000 20000
 
nand write 0x80200000 40000 20000
 
nand write 0x80200000 60000 20000
 
 
fatload mmc 0:1 0x80300000 u-boot.bin
 
nand unlock
 
nand ecc sw
 
nandecc sw
 
nand erase 80000 160000
 
nand write 0x80300000 80000 160000
 
nand erase 260000 20000
 
reset
 
  
== SGX Video Acceleration ==
+
= Method 3: Manual Install (no automatic scripts)=
  
Requirements: 2.6-stable from launchpad or 2.6.35.3-x1+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:
  https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
 
  
Note: ''An older version of these instructions was adapted for the IGEPv2 platform - if you are following this tutorial and have an IGEPv2, consider using http://wiki.jmaustin.org/wiki/IgepSGXUbuntu instead''
+
== Beagle/Beagle xM ==
 +
http://eewiki.net/display/linuxonarm/BeagleBoard
  
=== SDK unPackage Script ===
+
== BeagleBone ==
 +
http://eewiki.net/display/linuxonarm/BeagleBone
  
Download the latest version of the "create_sgx_package.sh" script
+
== BeagleBone Black ==
  wget http://rcn-ee.homeip.net:81/dl/updates/2.6-stable/create_sgx_package.sh
+
  http://eewiki.net/display/linuxonarm/BeagleBone+Black
  
Make script executable
+
== Panda/Panda ES ==
  chmod a+x ./create_sgx_package.sh
+
  http://eewiki.net/display/linuxonarm/PandaBoard
  
Run script
+
= Advanced =
./create_sgx_package.sh
 
  
After Successfully running:
+
==Install Latest Kernel Image==
  
:~/temp$ ls
+
General apt syntax for searching and installing a specific kernel:
  create_sgx_package.sh
+
  sudo apt-get update
  GFX_4_00_00_01_libs.tar.gz                      : -> Copy to Beagle (System Libs)
+
  sudo apt-cache search linux-image | grep <branch>
GFX_Linux_SDK.tar.gz                            : -> Copy to Beagle (DEMO's)
+
  sudo apt-get install linux-image-<specific version>
Graphics_SDK_setuplinux_4_00_00_01.bin
 
SDK
 
  SDK_BIN
 
 
 
=== Beagle: GFX_*_libs.tar.gz ===
 
 
 
tar xf GFX_4_00_00_01_libs.tar.gz  (extracts install-SGX.sh and run-SGX.sh)
 
./install-SGX.sh (copies necessary SGX libs and startup script)
 
./run-SGX.sh (force run the new init script, or you can just reboot...)
 
 
 
On Successful install:
 
Stopping PVR
 
Starting PVR
 
Starting SGX fixup for ES2.x (or ES3.x) (or ES5.x xM)
 
 
 
Reboot for good measure (Maverick's Alpha-1 needs this....)
 
 
  sudo reboot
 
  sudo reboot
  
=== Beagle: GFX_Linux_SDK.tar.gz ===
+
Latest kernel script
 +
cd /opt/scripts/tools/
 +
git pull
 +
sudo ./update_kernel.sh <OPTIONS>
  
tar xf GFX_Linux_SDK.tar.gz
+
== 3.8.x ==
cd GFX_Linux_SDK
+
This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy
  tar xf OGLES.tar.gz
+
  beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
  
=== Test SGX with a DEMO ===
+
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
 +
--bone-channel --stable
  
  cd OGLES/SDKPackage/Binaries/CommonX11/Demos/ChameleonMan
+
  3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
  ./OGLESChameleonMan
+
  --bone-xenomai-channel --stable
  
=== Trouble Shooting ===
+
== 4.4.x-ti ==
 +
This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.
 +
beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
  
  sudo rm /etc/powervr-esrev
+
  4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
  sudo depmod -a omaplfb
+
  --ti-channel --lts-4_4
sudo /etc/init.d/pvr restart
 
  
== DSP ==
+
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
--ti-rt-channel --lts-4_4
  
=== gst-dsp ===
+
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
 +
-ti-xenomai-channel --lts-4_4
  
This only currently works on the original Beagle's Bx and Cx models... There's a bug on the xM so it doesn't work...
+
== Mainline (lts) ==
  
Requirements: 2.6-stable from launchpad or 2.6.37-x2+ deb's from rcn-ee.net. (the Demo Images hosted on rcn-ee.net meet this requirement)
+
4.4.x BeagleBone/BeagleBone Black + SGX
  https://code.launchpad.net/~beagleboard-kernel/+junk/2.6-stable
+
--bone-kernel --lts-4_4
  
Download the latest version of the "create_dsp_package.sh" script
+
4.4.x BeagleBone/BeagleBone Black + RT + SGX
  wget http://rcn-ee.homeip.net:81/dl/updates/2.6-stable/create_dsp_package.sh
+
  --bone-rt-kernel --lts-4_4
  
Make script executable
+
Reboot with your new Kernel Image.
chmod a+x ./create_dsp_package.sh
 
  
Package script:
+
== Xorg Drivers ==
./create_dsp_package.sh
 
  
Copy DSP_Install_libs.tar.gz to beagle
+
Script:
 +
cd /opt/scripts/tools/
 +
git pull
  
Setup network...
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
Extract:
+
BeagleBone/BeagleBone Black:
  tar xf DSP_Install_libs.tar.gz
+
  cd /opt/scripts/tools/graphics/
 +
./ti-tilcdc.sh
  
Install
+
== SGX Drivers ==
./install-DSP.sh
 
  
Build gst-dsp stuff..
+
=== SGX BeagleBone/BeagleBone Black ===
./install-gst-dsp.sh
 
  
Test:
+
Note, these are FBDEV only, no xorg/x11/etc...
sudo dsp-test
 
  
Playbin:
+
Install the "4.1.x" lts/bone kernel:
sudo gst-launch playbin2 uri:file://(file)
+
http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29
  
== Xorg omapfb Drivers ==
+
Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)
 +
git clone https://github.com/RobertCNelson/bb-kernel.git
 +
cd bb-kernel/
 +
git checkout origin/am33x-v4.1 -b tmp-sgx
 +
./sgx_create_package.sh
  
By default Ubuntu will try to use the FBDEV video driver, however for the beagleboard we can take advantage of a more software optimized driver (still not using the sgx video hardware) using the NEON extensions of the Cortex-A8 core.
+
Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install
 
+
  sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cat /var/log/Xorg.0.log | grep FBDEV
+
  cd /opt/gfxinstall/
(II) FBDEV: driver for framebuffer: fbdev
+
  sudo ./sgx-install.sh
(II) FBDEV(0): using default device
+
  sudo reboot
(II) FBDEV(0): Creating default Display subsection in Screen section
 
(==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
 
(==) FBDEV(0): RGB weight 565
 
 
 
Login into Ubuntu and open a new terminal, xorg has to be running..
 
 
 
xvinfo -display :0.0
 
  X-Video Extension version 2.2
 
screen #0
 
  no adaptors present
 
 
 
=== Drivers ===
 
 
 
Note: These are built with neon optimizations: http://git.debian.org/?p=collab-maint/xf86-video-omapfb.git;a=blob;f=debian/rules;h=c2f0d5391c96c5abb60b1e691ad86bb27e0c17d8;hb=HEAD  (line 48/49)
 
 
 
Lucid:
 
sudo apt-get install xserver-xorg-video-omap3
 
 
 
To verify it was correctly installed, reboot and:
 
 
 
cat /var/log/Xorg.0.log | grep omapfb
 
(II) LoadModule: "omapfb"
 
  (II) Loading /usr/lib/xorg/modules/drivers//omapfb_drv.so
 
  (II) Module omapfb: vendor="X.Org Foundation"
 
(II) omapfb: Driver for OMAP framebuffer (omapfb) and external LCD controllers:
 
(WW) Error opening /sys/devices/platform/omapfb/ctrl/name: No such file or directory
 
(II) omapfb(0): VideoRAM: 1800KiB (SDRAM)
 
(II) omapfb(0): Creating default Display subsection in Screen section
 
(**) omapfb(0): Depth 16, (--) framebuffer bpp 16
 
(==) omapfb(0): RGB weight 565
 
(==) omapfb(0): Default visual is TrueColor
 
(--) omapfb(0): Virtual size is 1280x720 (pitch 1280)
 
(**) omapfb(0):  Built-in mode "current"
 
(==) omapfb(0): DPI set to (96, 96)
 
(II) omapfb(0): DPMS enabled
 
(II) omapfb(0): Video plane capabilities:
 
(II) omapfb(0): Video plane supports the following image formats:
 
(II) omapfb(0): XVideo extension initialized
 
 
 
Login into Ubuntu and open a new terminal, xorg has to be running..
 
 
 
xvinfo -display :0.0
 
  X-Video Extension version 2.2
 
screen #0
 
  Adaptor #0: "OMAP XV adaptor"
 
    number of ports: 1
 
    port base: 56
 
    operations supported: PutImage
 
    supported visuals:
 
      depth 16, visualID 0x21
 
    number of attributes: 1
 
    etc..
 
 
 
== Changing DVI output resolution ==
 
 
 
Ubuntu 10.10 above defaults to a resolution of 1284x768@16.  This is set in the boot.cmd file in the boot partition of the SD card.  To change the resolution the DVI output, edit boot.cmd accordingly then recreate the boot.scr file by:
 
 
 
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Ubuntu 10.10" -d ./boot.cmd ./boot.scr
 
 
 
Then reboot the BeagleBoard
 
 
 
== S-Video ==
 
S-video is tested to be working on 2.6.35-rc5-dl9. S-video output can be enabled using bootargs at uboot as mentioned below.
 
 
 
=== NTSC ===
 
 
 
    omapfb.mode='''tv:ntsc'''
 
    omapdss.def_disp='''tv'''
 
 
 
Bootargs that has been validated.
 
  
    setenv bootargs 'console=tty0 console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait ro vram=12M omapfb.mode=tv:ntsc omapdss.def_disp=tv
+
Verify omaplfb & pvrsrvkm loaded
    fixrtc buddy=unknown'
+
debian@arm:~$ lsmod | grep omaplfb
 +
omaplfb                12065  0
 +
pvrsrvkm              178782  1 omaplfb
  
Note that the NTSC resolution is 640x480. However the edge bands around the TV screen differ from TV to TV. Output of '''fbset''' shown below:
+
== Xorg Drivers ==
  
    mode "720x482-30"
+
Script:
        # D: 13.500 MHz, H: 15.734 kHz, V: 29.970 Hz
+
cd /opt/scripts/tools/
        geometry 720 482 720 482 32
+
git pull
        timings 74074 16 58 6 31 64 6
 
        rgba 8/16,8/8,8/0,0/0
 
    endmode
 
  
However, not all of this will be visible on-screen, this is called [http://en.wikipedia.org/wiki/Overscan Overscan]. To make the whole framebuffer fit on the screen you need to adjust the overlay. (Didn't test this yet. Some pointers from the driver's documentation below)
+
BeagleBoard/PandaBoard:
 +
cd /opt/scripts/tools/graphics/
 +
./ti-omapdrm.sh
  
    /sys/devices/platform/omapdss/overlay? directory:
+
BeagleBone/BeagleBone Black:
    enabled 0=off, 1=on
+
cd /opt/scripts/tools/graphics/
    input_size width,height (ie. the framebuffer size)
+
./ti-tilcdc.sh
    manager Destination overlay manager name
 
    name
 
    output_size width,height
 
    position x,y
 
    screen_width width
 
    global_alpha  global alpha 0-255 0=transparent 255=opaque
 
  
=== PAL ===
+
= Swapfile =
  
Bootargs that has been validated for PAL tv.
+
== Using a File for Swap Instead of a Partition ==
  
    setenv bootargs 'console=tty0 console=ttyS2,115200n8 root=/dev/mmcblk0p2 rootwait ro vram=12M omapfb.mode=tv:pal omapdss.def_disp=tv fixrtc buddy=unknown'
+
On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256&nbsp;MB and 512&nbsp;MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256&nbsp;MB not being enough RAM).
  
Using these settings video output will display on the tv, however 5-10% of the left and right edges of display are off the screen (using Ubuntu 10.10 with xfce).
+
Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.
  
xrandr shows the display is set to the minimum of 720x574. Please update wiki if you can fix this.
+
Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.
  
== Building Kernel ==
+
=== Creating a Swapfile ===
  
https://launchpad.net/~beagleboard-kernel
+
The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:
  
Register on launchpad.net, install bzr
+
sudo mkdir -p /var/cache/swap/ 
  sudo apt-get install bzr
+
  sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
 +
sudo chmod 0600 /var/cache/swap/swapfile
 +
sudo mkswap /var/cache/swap/swapfile
 +
sudo swapon /var/cache/swap/swapfile
  
Download SRC
+
To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:
bzr branch lp:~beagleboard-kernel/+junk/2.6-stable
 
  
Build Kernel
+
  /var/cache/swap/swapfile    none    swap    sw    0  0
  ./build_kernel.sh
 
  
Optional Building Deb File
+
To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.
./build_deb.sh
 
  
 
= Ubuntu Software =
 
= Ubuntu Software =
  
== Wifi Networking (command line) ==
+
== Wi-Fi Networking (command line) ==
  
 
=== /etc/network/interfaces ===
 
=== /etc/network/interfaces ===
  
It is possible and relatively easy to configure a wifi card from the command line.
+
It is relatively easy to configure a Wi-Fi card from the command line.
  
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
+
You will need to edit the /etc/network/interfaces file. There are several guides available via Google.
  
This is a particularly useful guide http://ubuntuforums.org/showthread.php?t=202834  
+
This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834  
  
 
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
 
A sample /etc/network/interfaces file for a WPA2 encrypted access point is:
Line 738: Line 599:
 
  wpa-group CCMP
 
  wpa-group CCMP
 
  wpa-key-mgmt WPA-PSK
 
  wpa-key-mgmt WPA-PSK
  wpa-psk < INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
+
  wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>
  
Your wifi card will automatically load these settings on start up and give network access.
+
Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.
  
 
== Lightweight window managers ==
 
== Lightweight window managers ==
Line 746: Line 607:
 
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
 
If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.
  
JWM in particular uses little RAM. On a BeagleBoard with 256MB, using JWM will leave about 60MB free to run apps in.
+
JWM in particular uses little RAM. On a BeagleBoard with 256&nbsp;MB, using JWM will leave about 60&nbsp;MB free in which to run applications.
  
 
== Web Apps ==
 
== Web Apps ==
  
 
=== Midori ===
 
=== Midori ===
Given that the BeagleBoard has fewer resources than a desktop a light weight browser is more responsive. Midori is a light weight browser that still supports flash etc
+
Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories:
It is available from the standard repositories.
 
 
http://en.wikipedia.org/wiki/Midori_%28web_browser%29
 
http://en.wikipedia.org/wiki/Midori_%28web_browser%29
  
Line 758: Line 618:
  
 
=== Motion ===
 
=== Motion ===
If you have a video source (webcam, IP cam etc) which appears as /dev/video0 etc then you can use the Linux Surveillance software "motion" to monitor the video stream and record periods of activity.
+
If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.
  
Motion is also available from the standard repositories.
+
Motion is also available from the standard repositories:
 
http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27
 
http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27
Using a 960x720 resolution webcam with 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
+
Using a 960x720 resolution webcam with a 15&nbsp;fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.
  
To make the BeagleBoard automatically start recording on boot do the following:
+
To make the BeagleBoard automatically start recording on boot, do the following:
  
 
* Auto Login - run "gdmsetup" from a terminal and select a user to automatically login  
 
* Auto Login - run "gdmsetup" from a terminal and select a user to automatically login  
* Sessions - make sure you don't save any previous xwindows sessions so that it doesn't prompt you for which one you want
+
* Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
* motion.conf - amend /etc/motion/motion.conf to the settings you want (ie video output directory, record only video, record in mpeg4, set frame rate etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
+
* motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
* Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it has the following text in it:
+
* Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
  
 
  #! /bin/sh
 
  #! /bin/sh
Line 776: Line 636:
 
This will now launch the motion client as root when you boot up.
 
This will now launch the motion client as root when you boot up.
  
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed) the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet Connection this can be achieved with the ntpdate app.
+
Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.
 
 
  
 
== Robotics ==
 
== Robotics ==
  
 
=== ROS ===
 
=== ROS ===
Willow Garage hosts the open source Robotic Operating System (ROS). Whilst it is natively supported in Ubuntu, the official packages are only for the x86 platform. ROS can be installed from source and is generally easy to do so (although slow).
+
ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.
  
Following the instructions from here will build and install ROS on your beagleboard:
+
There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:
  
http://www.ros.org/wiki/cturtle/Installation/Ubuntu/SVN
+
http://wiki.ros.org/indigo/Installation/UbuntuARM
  
You will need an Internet connection for your Beagleboard for these scripts to work.
+
Alternatively ROS can be installed from source and is generally easy to do so (although slow).
  
For more information about ROS see www.ros.org
+
For more information about ROS, see www.ros.org.

Revision as of 14:26, 13 October 2017

(For BeagleBoardAngstrom, click here.) (Should Beagleboard:Ubuntu On BeagleBone Black be merged into this page?)

This page is about running a Linux distribution (ARM EABI) Ubuntu on the BeagleBoard. BeagleBoard will boot the (ARM EABI) Ubuntu distribution from the SD card. Since much of this page is generic, it has also been extended to help support devices such as the PandaBoard and BeagleBone.

  • For the best experience, make sure you have an LCD/HDMI monitor attached to the BeagleBoard's HDMI port, 2 GB/4 GB/8 GB SD card, and a known good USB 2.0 hub with mouse and keyboard.

Help

If you need any help:

  • Ubuntu related help:
    • #ubuntu-arm: Ubuntu's ARM IRC on Freenode (logs -> year -> month -> day -> #ubuntu-arm.html)
  • When requesting help, please provide some debugging information:
    • U-Boot Version installed on board
    • Kernel Version: uname -a
    • pastebin dmesg
      • Copy from serial port or use "dmesg | pastebinit" (sudo apt-get install pastebinit)

Required Beagle Software

Mainline U-Boot:

  • All older BeagleBoard (classic) Ax, Bx, Cx and Dx boards are required to upgrade to at least these U-Boot versions
  • XM Boards have no NAND, so MLO/u-boot.img is always required on the first partition
  • Directions: Upgrade X-loader and U-Boot

Omap Serial Changes

boot.scr/boot.cmd changes:

With 2.6.35:

console=ttyS2,115200n8

With 2.6.36/37+:

console=ttyO2,115200n8

Serial console login: /etc/init/ttyO2.conf

start on stopped rc RUNLEVEL=[2345]
stop on runlevel [!2345]

respawn
exec /sbin/getty 115200 ttyO2

Method 1: Download a Complete Pre-Configured Image

Demo Image

git clone https://github.com/RobertCNelson/armv7-multiplatform.git
cd armv7-multiplatform
git checkout origin/v4.13.x -b tmp
./build_kernel.sh
git clone https://github.com/RobertCNelson/ti-linux-kernel-dev.git
cd ti-linux-kernel-dev
git checkout origin/ti-linux-4.9.y -b tmp
./build_kernel.sh

Ubuntu (16.04.3)

Default username/password:

  • username: ubuntu
  • password: temppwd

Image Updated:

  • 2017-10-12
    • BeagleBoard xM: v4.13.5-armv7-x1 kernel
    • All BeagleBone Varients and PocketBeagle: v4.9.54-ti-r68 kernel
    • OMAP5432 uEVM: v4.9.54-ti-r68 kernel
    • BeagleBoard-X15: v4.9.54-ti-r68 kernel
  • 2017-09-21
    • BeagleBoard xM: v4.13.3-armv7-x1 kernel
    • All BeagleBone Varients and PocketBeagle: v4.4.88-ti-r125 kernel
    • OMAP5432 uEVM: v4.4.88-ti-r125 kernel
    • BeagleBoard-X15: v4.4.88-ti-r125 kernel
  • 2017-09-14
    • BeagleBoard xM: v4.13.2-armv7-x1 kernel
    • All BeagleBone Varients: v4.4.87-ti-r121 kernel
    • OMAP5432 uEVM: v4.4.87-ti-r121 kernel
    • BeagleBoard-X15: v4.4.87-ti-r121 kernel

Services Active:

Note: Depending on your internal network these may work out of the box
Apache, Port 80: http://arm.local/ (Bone: via usb) http://192.168.7.2
SSH, Port 22: ssh ubuntu@arm.local (Bone: via usb) ubuntu@192.168.7.2
Getty, Serial Port

Default user: ubuntu pass: temppwd

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-10-12/elinux/ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz

Verify Image with:

sha256sum ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz
817cdaa038b4847862ce0715c982224ef9671d5938854e9d47d2c50b32a7e5de  ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz

Unpack Image:

tar xf ubuntu-16.04.3-console-armhf-2017-10-12.tar.xz
cd ubuntu-16.04.3-console-armhf-2017-10-12

If you don't know the location of your SD card:

sudo ./setup_sdcard.sh --probe-mmc

You should see something like:

Are you sure? I don't see [/dev/idontknow], here is what I do see...

fdisk -l:
Disk /dev/sda: 500.1 GB, 500107862016 bytes <- x86 Root Drive
Disk /dev/sdd: 3957 MB, 3957325824 bytes <- MMC/SD card

lsblk:
NAME   MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
sda      8:0    0 465.8G  0 disk 
├─sda1   8:1    0 446.9G  0 part /  <- x86 Root Partition
├─sda2   8:2    0     1K  0 part 
└─sda5   8:5    0  18.9G  0 part [SWAP]
sdd      8:48   1   3.7G  0 disk 
├─sdd1   8:49   1    64M  0 part 
└─sdd2   8:50   1   3.6G  0 part 
  • In this example, we can see via mount, /dev/sda1 is the x86 rootfs, therefore /dev/sdd is the other drive in the system, which is the MMC/SD card that was inserted and should be used by ./setup_sdcard.sh...

Install Image:

Quick install script for [board]

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb board

board options:

  • BeagleBoard Ax/Bx/Cx/Dx - omap3-beagle
  • BeagleBoard xM - omap3-beagle-xm
  • All BeagleBone Varients - beaglebone
  • OMAP5432 uEVM - omap5-uevm
  • BeagleBoard-X15 - am57xx-beagle-x15

So for the BeagleBoard xM:

sudo ./setup_sdcard.sh --mmc /dev/sdX --dtb omap3-beagle-xm

Advanced: Build Image:

git clone https://github.com/RobertCNelson/omap-image-builder.git
cd omap-image-builder
git checkout v2017.10 -b tmp

Stable:

./RootStock-NG.sh -c rcn-ee_console_ubuntu_xenial_armhf

Flasher

eMMC: All BeagleBone Varients with eMMC

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2017-10-12
    • All BeagleBone Varients with eMMC: v4.9.54-ti-r68 kernel
  • 2017-09-21
    • All BeagleBone Varients with eMMC: v4.4.88-ti-r125 kernel
  • 2017-09-14
    • All BeagleBone Varients with eMMC: v4.4.87-ti-r121 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-10-12/flasher/BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Verify Image with:

sha256sum BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
aff57d1c34e114f7ad90911a7068d30e88079c1e77efdf502ac60cb7091bbddd  BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat BBB-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX

eMMC: BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io First press and hold the boot select button (next to the microSD card), then apply power. On bootup the board should indicate it has started the flashing procedure visually via a Cylon Sweep pattern shown on the 4 LED's next to the ethernet jack. Progress is reported on both the serial debug and hdmi connectors, once completed all 4 LED's should be full ON. Simply remove power, remove the microSD card and Ubuntu will now boot directly from eMMC.

Script for reference: (this is the script that writes to the eMMC)

https://github.com/RobertCNelson/boot-scripts/blob/master/tools/eMMC/init-eMMC-flasher-v3.sh

This script will only take about 5-6 Minutes after power on.

Notes:

  • If only two LED's stay lit and nothing happens, the board has crashed due to lack of power. Retry with a 5Volt DC power supply connected.
  • If the 4 LED's blink a constant pattern, the eMMC write has failed. First REMOVE ALL capes, then retry again.

User: ubuntu pass: temppwd

Image Updated:

  • 2017-10-12
    • BeagleBoard-X15: v4.9.54-ti-r68 kernel
  • 2017-09-21
    • BeagleBoard-X15: v4.4.88-ti-r125 kernel
  • 2017-09-14
    • BeagleBoard-X15: v4.4.87-ti-r121 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-10-12/flasher/bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Verify Image with:

sha256sum bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
6915b3d1d930e48604dbd0d0a8a48b5cd2139cea5cc2281665bb411e03c1b9ec  bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-eMMC-flasher-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX

raw microSD img

BeagleBoard xM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-10-12
    • BeagleBoard xM: v4.13.5-armv7-x1 kernel
  • 2017-09-21
    • BeagleBoard xM: v4.13.3-armv7-x1 kernel
  • 2017-09-14
    • BeagleBoard xM: v4.13.2-armv7-x1 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-10-12/microsd/bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Verify Image with:

sha256sum bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
d7f75e185eff52be95a6a010ebdb3680bcd4b19f6cae54ac9ca82c1a6187296e  bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbxm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX

All BeagleBone Varients and PocketBeagle

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-10-12
    • All BeagleBone Varients and PocketBeagle: v4.9.54-ti-r68 kernel
  • 2017-09-21
    • All BeagleBone Varients and PocketBeagle: v4.4.88-ti-r125 kernel
  • 2017-09-14
    • All BeagleBone Varients and PocketBeagle: v4.4.87-ti-r121 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-10-12/microsd/bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Verify Image with:

sha256sum bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
d8cb91fb46a72c96bbb1daef694b17c9e358e782358f3b61c813fe85340c5403  bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bone-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX

OMAP5432 uEVM

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-10-12
    • OMAP5432 uEVM: v4.9.54-ti-r68 kernel
  • 2017-09-21
    • OMAP5432 uEVM: v4.4.88-ti-r125 kernel
  • 2017-09-14
    • OMAP5432 uEVM: v4.4.87-ti-r121 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-10-12/microsd/omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Verify Image with:

sha256sum omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
7c4ea606375de3ef648f67d85c3b1448c24ce80b30000b0c3b29e3f22591327a  omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat omap5-uevm-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX

BeagleBoard-X15

This image can be written to a 2GB (or larger) microSD card, via 'dd' on linux or on Windows/Mac/Linux: https://etcher.io

User: ubuntu pass: temppwd

Auto partition resize:

cd /opt/scripts/tools
git pull
./grow_partition.sh
sudo reboot

Image Updated:

  • 2017-10-12
    • BeagleBoard-X15: v4.9.54-ti-r68 kernel
  • 2017-09-21
    • BeagleBoard-X15: v4.4.88-ti-r125 kernel
  • 2017-09-14
    • BeagleBoard-X15: v4.4.87-ti-r121 kernel

Get prebuilt image:

wget https://rcn-ee.com/rootfs/2017-10-12/microsd/bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Verify Image with:

sha256sum bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb*
18500108ce8c4e861e0a707ea3003659aa1b28960db6bb09ed34df2319d7d253  bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz

Windows/Mac/Linux gui

http://etcher.io

Linux: (dd)

xzcat bbx15-ubuntu-16.04.3-console-armhf-2017-10-12-2gb.img.xz | sudo dd of=/dev/sdX

Method 2: Use the NetInstall method

You will need a 1GB/2GB/4GB/8GB SD card or greater.

Standard system : ~700 MB

Report Bugs/Issues to: https://github.com/RobertCNelson/netinstall/issues (anywhere else will be ignored..)

Download the netinstall script:

git clone https://github.com/RobertCNelson/netinstall.git
cd netinstall

Currently supported Ubuntu distributions:

--distro oneiric (11.10)
--distro precise-armhf (12.04)
--distro quantal (12.10)
--distro raring (13.04)
--distro saucy (13.10)

Device: <board> selection:

*BeagleBoard Ax/Bx/Cx  - omap3-beagle
*BeagleBoard xMA/B/C   - omap3-beagle-xm
*BeagleBone Ax         - am335x-bone-serial
*BeagleBone (DVI cape) - am335x-bone-video
*BeagleBone Black      - am335x-boneblack
*PandaBoard Ax     - omap4-panda
*PandaBoard A4+    - omap4-panda-a4
*PandaBoard ES     - omap4-panda-es

Installation script for new <board> selection: (slowly migrating all devices to this method)

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb <board> --distro <distro>

So for the xM: with quantal:

sudo ./mk_mmc.sh --mmc /dev/sdX --dtb omap3-beagle-xm --distro quantal
  • Other Options:
    • --firmware : installs firmware
    • --serial-mode : debian-installer uses Serial Port

Place SD card into BeagleBoard and boot:

Configure the network:

usb0: USB net <- (usually the OTG port)
eth0: USB net <- (usually the smsc95xx adapter on the BeagleBoard and PandaBoard)
wlan0: Wifi <- Your USDB-Wi-Fi device.. 

See my notes for my testing procedure: https://github.com/RobertCNelson/netinstall/blob/master/test.Ubuntu

Troubleshooting: If booting fails..

  • Hold the user button down to force booting from MMC
  • Upgrade X-loader and U-boot Upgrade X-loader and U-Boot
  • Clear U-boot's Environment Variables in NAND:
nand erase 260000 20000

NetInstall assumptions:

Assume asll <default>'s... Thanks you preseed.conf!!!

Method 3: Manual Install (no automatic scripts)

Note, this section used to have a lot of details, but maintenance of the two wiki's became a pain, so for now on we will just link to my other pages:

Beagle/Beagle xM

http://eewiki.net/display/linuxonarm/BeagleBoard

BeagleBone

http://eewiki.net/display/linuxonarm/BeagleBone

BeagleBone Black

http://eewiki.net/display/linuxonarm/BeagleBone+Black

Panda/Panda ES

http://eewiki.net/display/linuxonarm/PandaBoard

Advanced

Install Latest Kernel Image

General apt syntax for searching and installing a specific kernel:

sudo apt-get update
sudo apt-cache search linux-image | grep <branch>
sudo apt-get install linux-image-<specific version>
sudo reboot

Latest kernel script

cd /opt/scripts/tools/
git pull
sudo ./update_kernel.sh <OPTIONS>

3.8.x

This is the first beagleboard.org long term kernel tree with capemanager support, it's been the default install for Debian Wheezy

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/3.8
3.8.x BeagleBone/BeagleBone Black FULL Cape Support
--bone-channel --stable
3.8.x BeagleBone/BeagleBone Black FULL Cape Support + Xenomai
--bone-xenomai-channel --stable

4.4.x-ti

This is slated to replace the v3.8.x tree in Debian Jessie, cape manager support is enabled.

beagleboard.org patchset: https://github.com/beagleboard/linux/tree/4.4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15
--ti-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
--ti-rt-channel --lts-4_4
4.4.x-ti BeagleBone/BeagleBone Black/BeagleBoard-X15 + RT
-ti-xenomai-channel --lts-4_4

Mainline (lts)

4.4.x BeagleBone/BeagleBone Black + SGX
--bone-kernel --lts-4_4
4.4.x BeagleBone/BeagleBone Black + RT + SGX
--bone-rt-kernel --lts-4_4

Reboot with your new Kernel Image.

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

SGX Drivers

SGX BeagleBone/BeagleBone Black

Note, these are FBDEV only, no xorg/x11/etc...

Install the "4.1.x" lts/bone kernel: http://elinux.org/BeagleBoardUbuntu#Mainline_.28lts.29

Build SGX userspace for 4.1.x (must be done on an x86, due to the TI 5.01.01.02 blob extractor)

git clone https://github.com/RobertCNelson/bb-kernel.git
cd bb-kernel/
git checkout origin/am33x-v4.1 -b tmp-sgx
./sgx_create_package.sh

Copy ./deploy/GFX_5.01.01.02.tar.gz to BeagleBone/BeagleBone Black and install

sudo tar xfv GFX_5.01.01.02.tar.gz -C /
cd /opt/gfxinstall/
sudo ./sgx-install.sh
sudo reboot

Verify omaplfb & pvrsrvkm loaded

debian@arm:~$ lsmod | grep omaplfb
omaplfb                12065  0 
pvrsrvkm              178782  1 omaplfb

Xorg Drivers

Script:

cd /opt/scripts/tools/
git pull

BeagleBoard/PandaBoard:

cd /opt/scripts/tools/graphics/
./ti-omapdrm.sh

BeagleBone/BeagleBone Black:

cd /opt/scripts/tools/graphics/
./ti-tilcdc.sh

Swapfile

Using a File for Swap Instead of a Partition

On the Beagleboard you should expect to require a swap file given the limitation of how little RAM is available (between 256 MB and 512 MB). Some system programs like apt-get will only run properly when some swap space is present (due to 256 MB not being enough RAM).

Some images (such as those from Linaro.org) do not come with a swap partition or any swap space allocated.

Under Linux, swap space can be either a dedicated partition or a swap file. Both can be mounted as swap which the OS can access.

Creating a Swapfile

The following commands will create a 1 GB file, limit access only to root, format it as swap and then make it available to the OS:

sudo mkdir -p /var/cache/swap/   
sudo dd if=/dev/zero of=/var/cache/swap/swapfile bs=1M count=1024
sudo chmod 0600 /var/cache/swap/swapfile 
sudo mkswap /var/cache/swap/swapfile 
sudo swapon /var/cache/swap/swapfile 

To tell the OS to load this swapfile on each start up, edit the /etc/fstab file to include the following additional line:

/var/cache/swap/swapfile    none    swap    sw    0   0

To verify that the swapfile is accessilble as swap to the OS, run "top" or "htop" at a console.

Ubuntu Software

Wi-Fi Networking (command line)

/etc/network/interfaces

It is relatively easy to configure a Wi-Fi card from the command line.

You will need to edit the /etc/network/interfaces file. There are several guides available via Google.

This is a particularly useful guide https://ubuntuforums.org/showthread.php?t=202834

A sample /etc/network/interfaces file for a WPA2 encrypted access point is:

auto lo
iface lo inet loopback
auto wlan0
iface wlan0 inet dhcp
wpa-driver wext
wpa-ssid <NAME OF AP>
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk <INSERT KEY XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX>

Your Wi-Fi card will automatically load these settings upon startup and initialize wireless network access.

Lightweight window managers

If you intend to use Ubuntu on the BeagleBoard you can install JWM or IceWM to improve performance.

JWM in particular uses little RAM. On a BeagleBoard with 256 MB, using JWM will leave about 60 MB free in which to run applications.

Web Apps

Midori

Given that the BeagleBoard has fewer resources than a desktop a lightweight browser is more responsive. Midori is a lightweight browser that still supports flash, etc. It is available from the standard repositories: http://en.wikipedia.org/wiki/Midori_%28web_browser%29

Surveillance

Motion

If you have a video source (webcam, IP cam, etc.) which appears as /dev/video0, etc. then you can use the Linux surveillance software "motion" to monitor the video stream and record periods of activity.

Motion is also available from the standard repositories: http://www.debian-administration.org/article/An_Introduction_to_Video_Surveillance_with_%27Motion%27 Using a 960x720 resolution webcam with a 15 fps rate under the UVC driver the Rev C BeagleBoard under Xubuntu reports ~60% CPU utilisation.

To make the BeagleBoard automatically start recording on boot, do the following:

  • Auto Login - run "gdmsetup" from a terminal and select a user to automatically login
  • Sessions - make sure you don't save any previous X Windows sessions so that it doesn't prompt you for which one you want
  • motion.conf - edit /etc/motion/motion.conf to use the settings you want (that is, video output directory, record only video, record in MPEG-4, set frame rate, etc). Do this with "sudo medit /etc/motion/motion.conf" at a prompt.
  • Boot script - create a new script in /etc/rc2.d called "S65motion_client" and set permissions appropriately ("sudo chmod 777 /etc/rc2.d/S65motion_client"). Then edit the file so it contains the following lines:
#! /bin/sh
/usr/bin/motion -c /etc/motion/motion.conf

This will now launch the motion client as root when you boot up.

Also note that unless your BeagleBoard can remember the time (battery backed up clock installed), the timestamps will not be correct until you update the time. If your BeagleBoard has an Internet connection this can be achieved using the ntpdate application.

Robotics

ROS

ROS (Robot Operating System) provides libraries and tools to help software developers create robot applications. It provides hardware abstraction, device drivers, libraries, visualizers, message-passing, package management, and more. ROS is licensed under an open source, BSD license.

There are currently builds of ROS for Ubuntu Trusty armhf. These builds include most but not all packages, and save a considerable amount of time compared to doing a full source-based installation:

http://wiki.ros.org/indigo/Installation/UbuntuARM

Alternatively ROS can be installed from source and is generally easy to do so (although slow).

For more information about ROS, see www.ros.org.