View source for Beagleboard:Capes 3.8 to 3.14

= Kernel =
 https://github.com/beagleboard/linux

= Capes =
Latest 3.14 to support all:
 sudo apt-get update
 sudo apt-get install linux-image-3.14.43-ti-r65

== crypto ==
 http://elinux.org/Cryptotronix:CryptoCape

 dtb=<device>-crypto-00a0.dtb
 rtc [x]
 atmel_tpm [x]
 atmega_uart4 [x]
 atmega_gpio1_13_gpio1_17 [ ]

== lcd3 ==

=== lcd3-01-00a2 ===
 dtb=<device>-lcd4-01-00a2.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (4wire) [x]
 buttons [X]
 led [X]

== lcd4 ==

=== 4dcape-43 ===
 dtb=<device>-4dcape-43.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 buttons [x]
 led [x]

=== 4dcape-43t ===
 dtb=<device>-4dcape-43t.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (4wire) [x]
 buttons [x]
 led [x]

=== bb-view-43 ===
 dtb=<device>-bb-view-43.dtb
 screen [x] (need to fix the red <-> blue)
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (4wire) [x]
 buttons [X]
 led [X]

=== lcd4-01-00a1 ===
 dtb=<device>-lcd4-01-00a1.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (4wire) [x]
 buttons [X]
 led [X]

== lcd7 ==

=== 4dcape-70 ===
 dtb=<device>-4dcape-70.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 buttons [x]
 led [x]

=== 4dcape-70t ===
 dtb=<device>-4dcape-70t.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (4wire) [x]
 buttons [x]
 led [x]

=== Chipsee bbb-exp-c ===
Make sure xorg is in 24 bit mode:
 sudo sed -i -e 's:16:24:g' /etc/X11/xorg.conf

 dtb=<device>-bbb-exp-c.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (capactive touch) [x] (the startup calibrator script doesn't always pick it up on startup)
 buttons [x]
 led [x]

=== Chipsee bbb-exp-r ===
Make sure xorg is in 24 bit mode:
 sudo sed -i -e 's:16:24:g' /etc/X11/xorg.conf

 dtb=<device>-bbb-exp-r.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (resistive touch) [x]
 buttons [x]
 led [x]

=== lcd7-01-00a2 ===
untested: (no hardware)
 dtb=<device>-lcd7-01-00a2.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (4wire) [x]
 buttons [x]
 led [x]

=== lcd7-01-00a3 ===
 dtb=<device>-lcd7-01-00a3.dtb
 screen [x]
 backlight (gpio) [x]
 backlight (pwm) [ ]
 touchscreen (4wire) [x]
 buttons [x]
 led [x]

== rtc ==
 http://elinux.org/CircuitCo:RTC_Cape

 dtb=<device>-rtc-01-00a1.dtb
 rtc [x]
 gpio_wakup [x] - untested

= Custom dtb = 
By default, u-boot will load a *.dtb based on what board it is:
 BeagleBone White: am335x-bone.dtb
 BeagleBone Black: am335x-boneblack.dtb

Unless it's overwritten by a variable [dtb=] in uEnv.txt. For example, u-boot would load the pre-built 4dcape43t, instead of the default am335x-boneblack.dtb if it was passed:
 dtb=am335x-boneblack-4dcape-43t.dtb

Clone dtb-rebuilder
 git clone -b 3.14-ti https://github.com/RobertCNelson/dtb-rebuilder.git
 cd dtb-rebuilder/

BeagleBone White:
 ./src/arm/am335x-bone.dts

BeagleBone Black:
 ./src/arm/am335x-boneblack.dts

Build *.dtb:
 make

Install *.dtb to: /boot/dtbs/`uname -r`/*.dtb
 sudo make install

= External Kernel Modules =

== mt7601u ==
First: 3.14.19-ti-r25
 sudo apt-get install mt7601u-modules-`uname -r`
 sudo depmod -a `uname -r`
 sudo update-initramfs -uk `uname -r`

== sgx ==
First: 3.14.19-ti-r26
 sudo apt-get install ti-sgx-es8-modules-`uname -r`
 sudo depmod -a `uname -r`
 sudo update-initramfs -uk `uname -r`