Difference between revisions of "DaVinci Pinmux 1.0"
SpaceMonkey (talk | contribs) |
m (moved Pinmux 1.0 to DaVinci Pinmux 1.0) |
(No difference)
|
Revision as of 14:14, 3 December 2009
Do this via U-Boot
Open davinci.c from the boards directory in U-BOOT.
The stuff regarding pinmux is in there. More specifically:
#define PINMUX0 0x01C40000
/* Enable UART0 MUX lines */
*(volatile unsigned int *)PINMUX4 |= 1;
/* Enable EMAC and AEMIF pins */
*(volatile unsigned int*) PINMUX0 = 0x80000C1F;
Using the above as a guide, and with a copy of the DaVinci datasheet, you should be able to get what you want working.