Difference between revisions of "Das Oszi 3.5MM Uart"

From eLinux.org
Jump to: navigation, search
(Parts)
 
(8 intermediate revisions by 2 users not shown)
Line 1: Line 1:
 +
= Introduction =
 +
 +
This procedure has been documented in a way that someone who has very little experience with soldering or board modification should be able to accomplish the mod. In addition the parts chosen have been selected due to the availability, ease of use, and cost. Of course there are better ways, more robust solutions, and ones that are not so "hackish".
 +
 +
Note: If you use a 2.5mm stereo socket instead of the 3.5mm one, you can use the many "Motorola T191" and compatible cables
 +
as they are used with [http://bb.osmocom.org/ OsmocomBB] and a varity of other [http://osmocom.org/ Osmocom] projects.  The cables are also often available cheaper than the 3.5mm cable from Digikey linked below.
 +
 +
= Parts =
 +
* quantity 1 - [http://search.digikey.com/us/en/products/TTL-232R-3V3-AJ/768-1098-ND/2285997 usb->rs-232 with audio jack]
 +
* quantity 1 - [http://search.digikey.com/us/en/products/SJ1-3513/CP1-3513-ND/738683 through hole audio jack]
 +
[[File:audio-jack.jpg|100px]]
 +
* quantity 2 - [http://www.amazon.com/Cables-To-Go-45592-Multi-Color/dp/B002WENNB0 7in 3-pin Fan Power Extension Cable]
 +
[[File:3pin-fan-power.jpg|100px]]
 +
 +
 +
NOTE: [http://www.sparkfun.com/products/11154 Sparkfun.com] has a good selection of compatible parts
 +
 
= Outside Case =
 
= Outside Case =
 
[[File:das_oszi_case_outside-a.jpg|200px]]
 
[[File:das_oszi_case_outside-a.jpg|200px]]
Line 15: Line 32:
 
= PCB Connection =
 
= PCB Connection =
 
[[File:das_oszi_case_pcb.jpg|200px]]
 
[[File:das_oszi_case_pcb.jpg|200px]]
 +
 +
[[File:das_oszi_case_cable-d.jpg|200px]]
  
 
= Cable Sections =
 
= Cable Sections =
Line 22: Line 41:
  
 
[[File:das_oszi_case_cable-c.jpg|200px]]
 
[[File:das_oszi_case_cable-c.jpg|200px]]
 
[[File:das_oszi_case_cable-d.jpg|200px]]
 
  
 
= Connected =
 
= Connected =
 
[[File:das_oszi_case_cable-connected.jpg|200px]]
 
[[File:das_oszi_case_cable-connected.jpg|200px]]

Latest revision as of 11:18, 20 April 2012

Introduction

This procedure has been documented in a way that someone who has very little experience with soldering or board modification should be able to accomplish the mod. In addition the parts chosen have been selected due to the availability, ease of use, and cost. Of course there are better ways, more robust solutions, and ones that are not so "hackish".

Note: If you use a 2.5mm stereo socket instead of the 3.5mm one, you can use the many "Motorola T191" and compatible cables as they are used with OsmocomBB and a varity of other Osmocom projects. The cables are also often available cheaper than the 3.5mm cable from Digikey linked below.

Parts

Audio-jack.jpg

3pin-fan-power.jpg


NOTE: Sparkfun.com has a good selection of compatible parts

Outside Case

Das oszi case outside-a.jpg

Das oszi case outside-b.jpg

Das oszi case outside-c.jpg

Inside Case

Das oszi case cage.jpg

Das oszi case inside-a.jpg

Das oszi case inside-b.jpg

PCB Connection

Das oszi case pcb.jpg

Das oszi case cable-d.jpg

Cable Sections

Das oszi case cable-a.jpg

Das oszi case cable-b.jpg

Das oszi case cable-c.jpg

Connected

Das oszi case cable-connected.jpg