Device Tree Reference

From eLinux.org
Revision as of 12:55, 9 June 2016 by Frowand (talk | contribs) (move debugging section from Device_Tree)
Jump to: navigation, search


Top Device Tree page

Reference Manual

Introduction

Device Tree Usage

The Device Tree Usage page was previously located at devicetree.org

It walks through how to write a device tree for a new machine.

It is intended to provide an overview of device tree concepts and how they are used to describe a machine.

Miscellaneous Tips

Linux Drivers Device Tree Guide

Device Tree Source

  • presentations

Bindings

Subsystem specific

  • gpio / pinctrl
  • interrupts
  • timers
  • etc

Overlays

Device Tree Source Validation

Compiling .dtb (FDT binary blob)

  • via kernel make system
    • all configured .dtb
      • make dtbs
    • specific .dtb
      • make arch/arm/boot/dts/qcom-apq8074-dragonboard.dtb
  • via generated script in build directory
    • arch/arm/boot/dts/.*.dtb.cmd
    • arch/${ARCH}/boot/dts/.*.dtb.cmd

install

  • make dtbs_install
    • installs in /boot/dtbs/<kernel version> ???? -- is this useful ???
  • many other ways to install ....

boot loaders

booting

debugging

  • diffing .dts, .dtb, /proc/devicetree/
  • locating source location for properties
  • boot time messages
    • device creation
    • driver registration
    • binding driver to device
    • deferred binding

debugging - random hints

You can set CONFIG_PROC_DEVICETREE to be able to see the device tree information in /proc after booting. Build the kernel with this option set to 'Y', boot the kernel, then 'cd /proc/device-tree'

/proc/device-tree still does not exist.  Now what???

Is CONFIG_PROC_FS enabled?
Is CONFIG_OF enabled?
Does /sys/firmware/devicetree/base exist?  (Note that this path is not an ABI, but currently
  /proc/devicetree is a soft link to this location.)
Did the bootloader load a devicetree?  (Check the boot console or use dmesg to print the boot messages.)

For newer kernels where the CONFIG_PROC_DEVICETREE option does not exist, /proc/device-tree will be created if CONFIG_PROC_FS is set to 'Y'.

You might also try CONFIG_DEBUG_DRIVER=Y.

Also, often, you can set the line: "#define DEBUG 1" to an individual C file, to produce add debug statements to the routines in that file. This will activate any pr_debug() lines in the source for that file.

Alternatively, you can add the following to drivers/of/Makefile:

CFLAGS_base.o := -DDEBUG
CFLAGS_device.o := -DDEBUG
CFLAGS_platform.o := -DDEBUG
CFLAGS_fdt.o := -DDEBUG

Tools

"The device tree generator is a Xilinx EDK tool that plugs into the
Automatic BSP Generation features of the tool, XPS"

man pages

Glossary

  • .dtb - File name suffix, by convention, for compiled devicetree.
  • .dts - File name suffix, by convention, for devicetree source.
  • .dtsi - File name suffix, by convention, for devicetree source to be included by a .dts or .dtsi file.
  • Binary Blob - File containing a compiled devicetree.
  • dtc - Devicetree compiler.
  • EDT Expanded Device Tree - A copy of an FDT, but converted to kernel data structures, in the kernel memory space.
  • FDT Flattened Device Tree - A copy of a binary blob in the kernel memory space.

Definitions