Difference between revisions of "ECE434 Project-Image recoginition with openCV and Siri"

From eLinux.org
Jump to: navigation, search
(Installation Instructions)
(Installation Instructions)
Line 32: Line 32:
  
 
sudo apt install python-opencv
 
sudo apt install python-opencv
 +
 
sudo pip3 install opencv-python
 
sudo pip3 install opencv-python
  

Revision as of 09:31, 17 November 2020


Team members: Haoxuan Sun, Heda Wang

Executive Summary

In this project, we will use OpenCV to do image recognition. A servo will make the camera centered at the desired target. Also, it is controlled by Siri through shortcuts and ssh.

Currently, this project only supports three colors. But you can easily add colors you want to find. This project is limited by the processing speed of the beagle bone. Because the processing takes a long time for each frame, we can only point to the color instead of tracking. With enough optimization and computational power, this can be easily turned into an image tracker.

To achieve this project you need: 1. BeagleBone Black 2. A servo 3. A USB webcam 4. LED or other colorful things for target 5. (optional). iPhone or iPad Supports Siri

A demo video is available on YouTube: https://youtu.be/_aZgPR_QLXI

Hardware

Connect the USB camera to the USB port. Connect the servo to 5V on the Beaglebone. If the servo is not powered, you might need to plug in the 5v power supply on the beagle bone. The servo signal is connected to pin 8_13

Tie or glue the servo and the camera together. We will use the camera for other use laster, so we tie the camera and servo using some wire.

Installation Instructions

We need to install openCV To install it, connect to the BeagleBone and type:

sudo apt install python-opencv

sudo pip3 install opencv-python

and if error occurs, type:

   pip3 install opencv-python 
   sudo apt-get install libcblas-dev
   sudo apt-get install libhdf5-dev
   sudo apt-get install libhdf5-serial-dev
   sudo apt-get install libatlas-base-dev
   sudo apt-get install libjasper-dev 
   sudo apt-get install libqtgui4 
   sudo apt-get install libqt4-test

User Instructions

Highlights

Theory of Operation

Work Breakdown

List the major tasks in your project and who did what.

Also list here what doesn't work yet and when you think it will be finished and who is finishing it.

Future Work

Suggest addition things that could be done with this project.

Conclusions

Give some concluding thoughts about the project. Suggest some future additions that could make it even more interesting.