ECE434 Project - RC Tank

From eLinux.org
Revision as of 19:42, 18 November 2019 by Efast616 (talk | contribs) (Installation Instructions)
Jump to: navigation, search

thumb‎ Embedded Linux Class by Mark A. Yoder


Team members: Connor Mattox and Eric Fast


Grading Template

I'm using the following template to grade. Each slot is 10 points. 0 = Missing, 5=OK, 10=Wow!

00 Executive Summary
00 Installation Instructions 
00 User Instructions
00 Highlights
00 Theory of Operation
00 Work Breakdown
00 Future Work
00 Conclusions
00 Demo
00 Late
Comments: I'm looking forward to seeing this.

Score:  10/100

(Inline Comment)

Executive Summary

A picture of the tank can be seen to the right. The blynk app is also shown in the picture along with the batteries that we are using to power the system.

RcTank.jpeg

We will be 3D printing an RC tank and using a Raspberry Pi 3 to interface with it. The tank will be remote controlled over WiFi and have a camera on it for FPV (first-person view).

As of right now, we have all of the parts ordered and the tank is in the process of being 3D printed.

Right now we are running into issues where the tank stops responding to the commands sent over blynk. We think that this issue is caused by the low battery state. If the tank stops responding frequently please charge the batteries.

This was a really cool project to work on as we were able to sit in B200 and drive the tank out into the hall using the camera to see where we were going. We were also able to connect the tank to RHIT-OPEN so we should be able to drive it around anywhere on campus. It was also very cool to see the progress we have made since we made a similar tank for the ECE230 final project.

Packaging

If you have hardware, consider Small Build, Big Execuition for ideas on the final packaging.

Installation Instructions

The link below is to the github where we kept all the files for this project. The readme.md has instructions for what to download and should be followed before trying to run any of the other provided code. The github also includes the code that we have written that can be used to run the tank.

    https://github.com/mattoxcw/ECE434

The website that is shown in the link below was used for all the 3d printed parts as well as the suggested hardware.

    https://www.thingiverse.com/thing:3671909

In place of the suggested mx1616 dual h bridge we used the L293d dual h bridge as this was previously used in ECE230 and is sold at the parts room. We also used a 5V regulator to control the power input into the raspberry pi which was likewise sold in the parts room. Additionally we used a camera attachment for the raspberry pi which can be found at the link below.

https://www.amazon.com/Raspberry-Pi-Camera-Module-Megapixel/dp/B01ER2SKFS?ref_=fsclp_pl_dp_1

User Instructions

Once everything is installed, how do you use the program? Give details here, so if you have a long user manual, link to it here.

Highlights

Here is where you brag about what your project can do.

Include a YouTube demo the audio description.

Theory of Operation

Give a high level overview of the structure of your software. Are you using GStreamer? Show a diagram of the pipeline. Are you running multiple tasks? Show what they do and how they interact.

Work Breakdown

List the major tasks in your project and who did what.

Also list here what doesn't work yet and when you think it will be finished and who is finishing it.

Future Work

Suggest addition things that could be done with this project.

Conclusions

Give some concluding thoughts about the project. Suggest some future additions that could make it even more interesting.




thumb‎ Embedded Linux Class by Mark A. Yoder