ECE497 Beagle VNS
Embedded Linux Class RHIT
I'm using the following template to grade. Each slot is 10 points. 0 = Missing, 5=OK, 10=Wow!
10 Executive Summary (Looks good. Be sure to keep it up to date) 00 Installation Instructions (I suggest putting the Hardware section before the software) 05 User Instructions (How do I make sendmail work on my Bone?) 00 Highlights (Not done yet) 00 Theory of Operation (ditto) 10 Work Breakdown 00 Future Work 00 Conclusions 00 Demo 00 Late Comments: I'm looking forward to seeing the completed project. Score: 25/100
We wanted a way for students to be able to leave audio (and possibly video) messages for professors when they are out of their office. Using a BeagleBoard Bone, we plan to connect a wireless USB device and a PlayStation Eye to achieve this. Students will be able to walk up to the device and press a button to record their message which will then be available for the professor.
At this time, we have a method for capturing audio for a specified amount of time and encoding that recording into a mp3 file. We also have python script that allows the user to send email messages to another email by running a script. We also have a working external power source for the beagle.
The wireless usb adapter does not work at this time. We are still trying to get recompile the kernel to install and enable the driver for this wireless adapter.
Overall we are looking at creating a c program that will record the audio while the button is being pressed. Once the button has been released the program will encode the raw audio into mp3 format, and then attach it via an email and send it to the owner of the Beagle VNS system.
- This project is design primarily for the BeagleBone, but could be implemented on any other Beagle Board given the proper driver installation for the USB hardware and available GPIOs. The BeagleBone is applicable for this project due to is small size, low power consumption, and networking capabilities. Make sure to use the A5 image of Ångström as the A6 image is still buggy with respect to audio/video capturing, as well as using the USB WiFi drivers.
- Further BeagleBone documentation can be found on the official Beagle Board website.
- This device can be found available here
- In this project tutorial, we will be using the PlayStation Eye as the audio and video source to recod messages and capture face images. The PlayStation Eye is very compatible with the A5 image of Ångström and used in many other Beagle embedded Linux projects.
- This device can be found available here
- Wifi dongle
- Here we would like to use a WiFi dongle to easily connect to surrounding wireless networks for ease of installation and placement in the remote stretches of hallways and doorframes. We will need we will need network connectivity to transmit e-mails and recording attachments over to an available e-mail server account. In particularly we are using the Belkin N150 Micro Wireless USB Adapter.
- Although this device is not natively supported with the stock A5 image of Ångström, a brief tutorial has already been made on how to compile and install the device drivers for this particular wireless USB adapter: Belkin Micro Wi-Fi USB dongle on the BeagleBoard
- Battery Pack and USB Hub
- To again better a ease installation and quick deployment for our system we are using a battery pack to provide power for the BeagleBone, the WiFi dongle and the USB camera. Due to the hottest limitations of the Beagle bones single USB port, in addition to the limited amount of current that the single USB port can provide, we will also use a USB hub with power adapter to solve both issues.
- In order for the end user to trigger the recording sequence, we will implement a traditional mechanical momentary pushbutton that will connect to the BeagleBone’s GPIO using the enabled internal pull-up resistors.
- As a simple display, our project will utilize a simple LED as an indicator for the user that the audio is currently being recorded and that a face capture will be taken.
- Angstrom A5 Image
- In order to use the camera drivers for the playstation eye you will need to install the A5 image on the beagle bone. To do this you will need to download the A5 image. Then you will need to install this image on the sd card of the BeagleBone using the instructions bases on ECE 497 Exercise 03 Installing a Beagle OS.
- In order to use the project code for the Beagle VNS, you will need github installed in order to download the code. If you do not have github there are instruction on how to install it on the ECE Exercise 16 web page.
- To download the code for the Beagle VNS run the following code:
beagle$ git clone git://github.com/geislekj/BeagleBoardVNS.git
(Use the 'Git Read-Only' path here)
- Python is natively installed on the Beagle operating system. However it is important to note that the program will be using a python script to send email.
- The project uses ALSA drivers in order to record audio from a microphone device.
- In order to download the ALSA drivers you will need to run the following commands:
beagle$ opkg update beagle$ opkg install alsa-utils-aplay alsa-utils-amixer
- Lame is a audio encoder that will take raw audio and convert it into an mp3 format.
- To install the lame onto the beagle board you will need to run the following command.
beagle$ opkg install lame
- GStreamer is an application that allows the user to capture video from a camera for multiple types of solutions. For this project, it is being used to capture an image of the person leaving a message.
- Instructions to install GStreamer is still in the process of being developed.
- Basic Command Line Examples
- In order to give you a feel to how the program is capturing and sending emails. Here is a short run down of how the program works
- Audio Capture
- In order to capture audio, the project uses arecord. This application allows you to grab audio from a microphone that is attached to your device and save to the current directory in a raw format.
- Here is an example command that allows you to record audio and then pipe the audio into aplay to instantaneously hear feedback:
(Bold the command the user types)
beagle$ arecord -D plughw:1,0 | aplay
- In order to encode the audio into mp3 format, you will need to pipe the audio into lame instead of aplay.
- Here is an example of this:
beagle$ arecord -D plughw:2,0 -r 16000 -f S16_LE -c 2 -t raw -d 3 | lame -s 16 -r - blackbird.mp3
(Why did the plughw number change?)
- For more information about ALSA and how to use many of its interesting features visit | Jan Axelson's Lakeview Research web page
- Email Script
- A python mail client that prompts the user for information to send an email with optional attachments.
Send To (Separated by a comma): Files (Separated by a comma): Send From: email@example.com #Must use this email for now Subject: Message:
What do I have to change to make this work in my Bone?
Here is where you brag about what your project can do.
Include a YouTube demo.
Theory of Operation
Give a high level overview of the structure of your software. Are you using GStreamer? Show a diagram of the pipeline. Are you running multiple tasks? Show what they do and how they interact.
List the major tasks in your project and who did what.
Also list here what doesn't work yet and when you think it will be finished and who is finishing it.
1. Acquire Hardware - Ruffin
2. Set up project page - Tom & Kevin
- Page made and updated
3. Get USB wireless to work - Kevin & Ruffin
- This is not working at this time for A6 image
4. Get PlayStation Eye to work - Tom
- Audio working, need to use A5 image
- Passing capture video on to Ruffin
5. Get BeagleBoard Bone to run off a battery pack - Ruffin
6. Register an email for the BeagleBoard - Ruffin
- Google acound made, along with Gmail and Google vouice accounts
7. Create an email script to send email with attachments - Tom
- Email sending
8. Encode the raw audio from ALSA into mp3 format - Kevin
- Able to record on bone, use lame to convert file, and SCP to send to PC and listen to the recording
9. Capture an image using GStreamer - Kevin & Tom
- This is still being developed
10. Create a C program to capture the audio and listen for GPIO inputs - Kevin & Ruffin
- This is still being developed
11. Putting all the pieces together - Tom, Kevin, & Ruffin
- Making c file for initializing GPIOs, interrupts and start up scripts for VNS server
import smtplib, os from email.MIMEMultipart import MIMEMultipart from email.MIMEBase import MIMEBase from email.MIMEText import MIMEText from email.Utils import COMMASPACE, formatdate from email import Encoders def send_mail(): #This version promts the user to specify recipient, files, #subject, and message. The version for incorperating in the #notifier will need to read from a preferences file that #should be modifiable by the user. send_to = raw_input("Send To (Separated by a comma): ") files = raw_input("Files (Separated by a comma): ") send_to=send_to.split(',') files=filter(None, files.split(',')) #Make sure that we are working with a list assert type(send_to)==list assert type(files)==list send_from = raw_input("Send From: ") subject = raw_input("Subject: ") #Create a message object that we will be sending msg = MIMEMultipart() msg['From'] = send_from msg['To'] = COMMASPACE.join(send_to) msg['Date'] = formatdate(localtime=True) msg['Subject'] = subject text = raw_input("Message: ") msg.attach( MIMEText(text) ) #Attach files to message for f in files: part = MIMEBase('application', "octet-stream") part.set_payload( open(f,"rb").read() ) Encoders.encode_base64(part) part.add_header('Content-Disposition', 'attachment; filename="%s"' % os.path.basename(f)) msg.attach(part) #Open up a connection to the gmail servers on port 587 server = smtplib.SMTP('smtp.gmail.com',587) #port 465 or 587 server.ehlo() server.starttls() server.ehlo() #password = getpass() password="beagleece497" server.login(send_from, password) server.sendmail(send_from,",".join(send_to),msg.as_string()) server.close() if __name__ == '__main__': send_mail()
Suggest addition things that could be done with this project.
- Web Interface using HTML and NodeJS
Give some concluding thoughts about the project. Suggest some future additions that could make it even more interesting.
Need More Cake
Embedded Linux Class RHIT