Difference between revisions of "ECE497 Notes on Ubuntu and Audio Cape"
(Greg Larmore's notes on the audio cape) |
m |
||
Line 1: | Line 1: | ||
+ | [[Category:EmbeddedBeagleClass]] | ||
+ | [[Category:ECE497Notes |ubuntu]] | ||
+ | |||
To install Ubuntu on the BeagleBone follow the instructions at http://elinux.org/BeagleBoardUbuntu | To install Ubuntu on the BeagleBone follow the instructions at http://elinux.org/BeagleBoardUbuntu | ||
Line 75: | Line 78: | ||
With these settings, I was able to get the Expander, Sustainer, Looper, and Dual Flange to work without crasing jackd | With these settings, I was able to get the Expander, Sustainer, Looper, and Dual Flange to work without crasing jackd | ||
− | |||
− | |||
− |
Latest revision as of 09:05, 18 May 2013
To install Ubuntu on the BeagleBone follow the instructions at http://elinux.org/BeagleBoardUbuntu
In Ubuntu, to get ALSA to work with the BeagleBone Audio cape, the following modules should be specified in '/etc/modules'
snd_soc_tlv320aic3x snd_soc_davinci snd_soc_davinci_mcasp snd_soc_evm
You can test the audio by running `speaker-test`. Also running `aplay -l` will show a list of available sound cards. If the sound card is not shown, run `lsmod` and `dmesg` and make sure the kernel modules above have loaded without errors.
Rakarrack is a very nice open source audio effects processor that looks just like a guitar pedalboard. It uses the Jack Audio Connection Kit to stream audio allowing for realtime audio effects
Start by installing jackd2. This requires a patch for the current version (1.9.10) on ARM (see http://jack-audio.10948.n7.nabble.com/Jack-Devel-jack2-on-ARM-patch-td15962.html). Run the recipe found at that page (copied below with a couple modifications).
wget http://jack-audio.10948.n7.nabble.com/attachment/15962/0/jack2_armel.diff apt-get source jackd2 cd jackd2-1.9.8~dfsg.4+20120529git007cdc37 patch -p1 -i ../jack2_armel.diff dpkg-buildpackage -rfakeroot -uc -b cd .. sudo dpkg -i libjack-jackd2-0_1.9.8~dfsg.4+20120529git007cdc37-2ubuntu1_armhf.deb jackd2_1.9.8~dfsg.4+20120529git007cdc37-2ubuntu1_armhf.deb
Then install Rakarrack by running the following:
sudo apt-get install rakarrack
The installation should install jackd as a dependency. To check the installed jack packages run the following:
dpkg --get-selections | grep jack
You should see something like this:
ubuntu@arm:~$ dpkg --get-selections | grep jack jack deinstall jackd install jackd1 deinstall jackd2 install libjack-jackd2-0:armhf install libjack0:armhf deinstall qjackctl deinstall
Now you should be able to run the rakarrack GUI. Use `ssh -X ubuntu@192.168.0.XXX` to connect to the BeagleBone with X11 forwarding and then run `rakarrack`. The program should be able to find jackd by itself. If not try killing the jack processes and restart rakarrack. One way to do this is run `ps -AL | grep jack`, and then run `kill -9` with the pid number.
If you have problems with jackd not running you can try running in manually (make sure it is not running in the background first). Run `jackd -d alsa` and the output should look somethings like the following:
ubuntu@arm:/etc$ jackd -d alsa jackdmp 1.9.10 Copyright 2001-2005 Paul Davis and others. Copyright 2004-2013 Grame. jackdmp comes with ABSOLUTELY NO WARRANTY This is free software, and you are welcome to redistribute it under certain conditions; see the file COPYING for details JACK server starting in realtime mode with priority 10 creating alsa driver ... hw:0|hw:0|1024|2|48000|0|0|nomon|swmeter|-|32bit control device hw:0 configuring for 48000Hz, period = 1024 frames (21.3 ms), buffer = 2 periods ALSA: final selected sample format for capture: 32bit integer little-endian ALSA: use 16 periods for capture ALSA: final selected sample format for playback: 32bit integer little-endian ALSA: use 16 periods for playback
When Rakarrack opens, it may warn you that your CPU is not fast enough to run some of the audio effects (e.g. convolutron). See (http://forums.fedoraforum.org/archive/index.php/t-254181.html) for some tips on mitigating performance problems. If you crash jackd, you can easily kill its processes as shown above and restart Rakarrack (there is no need to reboot or anything).
Some things to improve performance (a bit...)
Increase clock speed of BeagleBone by running the following:
sudo cpufreq-set -f 720MHz sudo cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
The output of that last command should be '720000'
Also in Rakarrack go to 'Settings->Preferences->Audio' and lower all the downsample settings to '4000' and the up to 'Fastest'
With these settings, I was able to get the Expander, Sustainer, Looper, and Dual Flange to work without crasing jackd