ECE497 Project: PS EYE QT
For our Final Project we wanted to be able to capture audio from the PlayStation Eye microphone array and then be able to display the audio waveforms all on the beagle. Initially we set out to display the waveforms in Qt using Qwt, which was later proved to be more difficult than initiall anticipated due to limitations on the Beagle and neither of us having prior C++ programming experience. The next thought was to try to use GnuPlot to try to plot the audio data. GnuPlot was really designed to produce static plots of information, not plots that were in realtime. We were able however to find different ways to "force" GnuPlot to plot the live data with the help of a clever script written by Thanassis Tsiodras, and then also edited by Andreas Bernauer which can be found here. When we implemented this script with our audio data on the beagle it still wasn't as realtime as we would have liked it to be due to the capabilities of the beagle, so we then had the idea to send the data back to a host computer which would then have the processing capability to produce the results we were after.
We currently have working plots of audio waveforms for channel1 and channel2 of the PS Eye microphone array. These plots are displayed on a host computer with the data being sent from the beagle via netcat.
Currently lowpass and bandpass filters have been implemented on the host using Gstreamer. But we have some Gstreamer compile problem at beagleboard. We will fix these problems and plan to add other effects like flager. If time permits it would be interesting to see if what we could also get netcat to do such as transferring video and/or audio from the beagle to the host.
This project turned out to be a lot more difficult then initially anticipated. Although it would be nice for this project to run solely on the beagle it is very interesting to discover all of the possibilities of utilizing netcat between the beagle and host.
- This is the github path to our project: https://github.com/harrisgw/ECE497-DisplayAudioWaveforms .
Every package needed on the beagle should already be there with the current image we are working with. Start by cloning the git directory on the host computer:
user@host:~$ git clone firstname.lastname@example.org:harrisgw/ECE497-DisplayAudioWaveforms.git
Then go into this directory and view all the files
user@host:~$cd ECE497-DisplayAudioWaveforms user@host:~/ECE497-DisplayAudioWaveforms$ ls Beagle driveGnuPlotStreams.pl Host.sh README
The folder Beagle now needs to be copied to the beagle. In this example 10.0.0.13 is the IP address of the beagle replace with your beagles IP address:
user@host:~/ECE497-DisplayAudioWaveforms$ scp -r Beagle/ email@example.com:. firstname.lastname@example.org's password: audio_input_output.h 100% 521 0.5KB/s 00:00 Makefile 100% 6923 6.8KB/s 00:00 Beagle.sh 100% 56 0.1KB/s 00:00 audio_input_output.c 100% 12KB 11.7KB/s 00:00 debug.h 100% 741 0.7KB/s 00:00 audio_thread.h 100% 447 0.4KB/s 00:00 audio_process.c 100% 879 0.9KB/s 00:00 audio_process.h 100% 98 0.1KB/s 00:00 app_DEBUG.Beagle 100% 23KB 23.4KB/s 00:00 main.c 100% 1806 1.8KB/s 00:00 audio_thread.c 100% 9553 9.3KB/s 00:00
The Beagle folder should now be on your beagleboard. Check and then enter that folder:
root@beagleboard:~# ls Beagle a.out busybox driveGnuPlotStreams.pl exercises sinuses.pl Desktop autogain byobu-4.25 esc-gst network Old bin c6run_build esc-media qt root@beagleboard:~# cd Beagle root@beagleboard:~/Beagle# ls Beagle.sh audio_input_output.c audio_process.h debug.h Makefile audio_input_output.h audio_thread.c main.c app_DEBUG.Beagle audio_process.c audio_thread.h
Now that that is all set up we need to get the gnuplot package on the host. This should be all you need to do:
user@host:~/ECE497-DisplayAudioWaveforms$ sudo apt-get install gnuplot
Now everything should be ready
- Note: The PS Eye should be attached to the Beagle board and both the host computer and beagle should be on the same Internet network
After setting up everything on the host and Beagle, its time to see if everything works. First run the Beagle.sh script on the Beagle board:
Then on the host run the Host.sh script, which will ask a series of questions:
user@host:~/ECE497-DisplayAudioWaveforms$ ./Host.sh How many streams (enter:1 or 2)? 2 Would you like those streams in 1 window or 2 windows? (enter:1 or 2) 2 How many samples per window? 100 Enter Minimum Y axis: -10000 Enter Maximum Y axis: 10000 Enter window width: 500 Enter window height: 500 Enter IP address of Beagle: 10.0.0.13
If everything worked you should now see 2 plots of audio that are from the Beagle board being displayed on the host computer. To quit the plots just push ctrl-c in the terminal window of either the beagle or the host.
Here is where you brag about what your project can do.
Consider including a YouTube demo.
Theory of Operation
Give a high level overview of the structure of your software. Are you using GStreamer? Show a diagram of the pipeline. Are you running multiple tasks? Show what they do and how they interact.
Initial work with Qt-Greg
Plotting with gnuplot-Greg
Sending data back to host for faster plotting with netcat- Greg
Making scripts to somewhat automate the plotting- Greg
Audio effect using Gstreamer- Mona
Give some concluding thoughts about the project. Suggest some future additions that could make it even more interesting.