Events

From eLinux.org
Revision as of 05:53, 6 December 2022 by Wmat (talk | contribs) (Moving past events to past events section.)
Jump to: navigation, search

Here are links to events of interest to embedded Linux developers.

See ELC_Presentations for a list of links to past event pages.

Contents

Upcoming Events

2023

Past events

Some information is at: Embedded linux events

Here is a list of past Embedded-related events:

2022

December 2022

November 2022

October 2022

September 2022

  • Webinar: Add USB-C to your next carrier board design! - September 02, 2022 [Register here]!
    • USB-C is not just a smaller connector that you finally do not have to plug in three times because you tried it upside down. You need additional components to implement a compliant USB-C port on your carrier board. USB-C power delivery gets so much better, but unfortunately also a bit more complicated. On the latest Toradex Carrier Boards, several connectors have been replaced with USB-C. It might be to replace them also on your next design. Allow a Toradex HW expert to provide you with tips and tricks and have your technical questions answered.
  • Webinar: Anatomy of a Linux Device Driver - September 28, 2022 [Register here]!
    • This webinar examines the role and structure of a Linux device driver, how it interacts with existing frameworks and subsystems within the Linux kernel.
  • Webinar: Enhanced Cybersecurity and FIPS 140-2 Compliance using NXP® i.MX 8X - September 29, 2022 [Register here]!
    • During this webinar, Secmation will explain how we can support this development by providing security engineering and security software development assistance in QNX or Torizon to enhance product cybersecurity.

August 2022

  • Webinar: Working with Devicetrees - August 10, 2022 [Register here]!
    • In this webinar, Toradex partner, Doulos, will demystify how hardware is described by the devicetree and how the Linux kernel can use the data provided by the devicetree description to configure how device drivers talk to the underlying hardware.
  • Workshop: Getting Started With Machine Learning Using Toradex and NXP® eIQ - August 24, 2022 [Register here]!
    • In this hands-on workshop, Mohammed Billoo will demonstrate how NXP's eIQ framework can be used and deployed on a system with a Toradex SoM, running Torizon. Specifically, he will demonstrate how to load a model onto the system and conduct inference from a contrived dataset, using the Neural Processing Unit on the iMX8 processor.
  • Portuguese Webinar: Explorando as funcionalidades da plataforma Torizon - August 25, 2022 [Register here]!
    • Neste webinar, apresentaremos uma introdução ao Torizon e seus componentes, reforçando a vantagem da utilização de containers para administração dos seus componentes de software. A partir de demonstrações práticas, iremos comprovar como o Torizon facilita e acelera o desenvolvimento de seus projetos.

July 2022

  • Webinar: Meeting the Challenge of OTA for Embedded Linux Systems - July 20, 2022 [Register here]!
    • In this webinar we look at the challenges of managing the process of updating software on embedded Linux systems remotely – often referred to as an Over The Air or OTA update.

June 2022

  • Webinar: OSTree for Embedded Linux Distribution Toradex - June 29, 2022 [Register here]!
    • In this webinar, Toradex partner, Doulos will provide an overview of the key features of OSTree and highlight how to get started by using appropriate Yocto layers. Doulos will also illustrate how a complete OSTree-based OTA integration is provided by the Torizon™ distribution from Toradex.
  • Webinar: What is Time of Flight camera and how it enhances 3D vision applications? - June 16, 2022 [Watch the webinar recoding here]!
  • Embedded World 2022:e-con Systems delighted to invite you to our Booth # Hall 2, Stand: 2-451 at Embedded World, Nuremberg, Germany (June 21 - June 23,2022).

https://www.e-consystems.com/events/embedded-world-2022.asp

May 2022

  • Webinar: Using Python to Implement a Complete Machine Learning Flow - May 25, 2022 [Register here]!
    • The webinar explores the Python language features needed both to prepare datasets and to code and train neural network models and examine the options available for using Python across the whole machine learning flow, from data gathering and curation through model training to deployment.

April 2022

  • Webinar: Secure Offline and Online Updates for Linux Devices - April 07, 2022 [Register here]!
    • In this webinar, we will discuss common ways to do offline updates and the pros and cons in regards to reliability and security. We will demonstrate how to bring offline updates onto embedded/IoT Linux devices.
  • Webinar: IoT and Edge Device Management Using Torizon by Toradex - April 08, 2022 [Register here]!
    • Managing IoT and Edge devices across a fleet is a critical element of any successful deployment. Unfortunately, there are a myriad of frameworks across all layers of the stack that can be overwhelming. Creating a custom solution can be time consuming and may incur substantial cost.
  • Twitch Live Stream: A Real Application - April 22, 2022 [Register here]!
    • In this episode, we will interview Leonardo Veiga, Product Owner, TorizonCore, to get some insight into how and why it was designed the way it is. We will better be able to understand how Torizon can work with real-world applications. We will then develop a simple application using pre-existing containers to implement a personal voice assistant.
  • Webinar: Python Coding Guidelines and Idioms - April 29, 2022 [Register here]!
    • Doulos presents this webinar in partnership with Toradex. It includes an overview of the Toradex board portfolio and the Torizon software platform.

March 2022

  • Webinar: Accelerate your Visual Intelligence Project with the Maivin AI Vision Starter Kit - March 01, 2022 [Register here]!
    • Join Toradex and our partners at Au-Zone Technologies and NXP as we demonstrate the practical steps of going from concepts on the drawing board, to benchtop experiments, into low volume trials, and finally into production using the Maivin AI Starter Kit and eIQ Toolkit.
  • Twitch Live Stream: In the Field Using the Torizon Platform to deploy application updates - March 11, 2022 [Register here]!
    • Come watch us live on TWITCH as our expert, Drew Moseley, will expand on the basic Torizon installation and configuration from episode 1.
  • Webinar: Anatomy of a Linux Device Driver - March 23, 2022 [Register here]!
    • This webinar examines the role and structure of a Linux device driver, how it interacts with existing frameworks and subsystems within the Linux kernel.

February 2022

  • Webinar: Hands-On Introduction to Torizon by Toradex - February 09, 2022 [Register here]!
    • In this webinar, MAB LABS, a Toradex partner, will take you through some of the tasks that are necessary to deploy Torizon on hardware with custom peripherals, to develop and test applications on an embedded system running Torizon, and to provision and push updates to such a system.
  • Twitch Live Stream: Hello World Using the Torizon Embedded Linux Distribution - February 11, 2022 [Register here]!
    • Come watch us live on TWITCH as our expert, Drew Moseley, talks about simplifying the development of connected device software using Torizon!
  • Webinar: Secure Device Monitoring - February 23, 2022 [Register here]!
    • In this webinar, using Torizon, the end-to-end platform providing remote services for embedded devices, we will discuss alternatives and methods to monitor devices, thereby keeping them healthy. We will also share some cases where reliability and lifetime can be affected. Additionally, we’ll showcase how issues can be predicted and over-the-air software fixes or scheduled programmed maintenance can be carried out before the product actually fails.

January 2022

  • Webinar: Python for IoT Edge Devices - January 12, 2022 [Register here]!
    • In this joint webinar from Toradex and Doulos, you will learn how to use Python for IoT Edge Device applications, including the use of Python to access input & output (IO) devices, edge device to cloud-connectivity, local storage of edge parameters and hosting of a machine learning model.

2021

December 2021

  • Webinar: Industry 4.0: Building Embedded Products for Today's Industrial Markets - December 09, 2021 [Register here]!
    • In this webinar learn how to build Industry 4.0 ready Linux/RTOS based embedded products. Learn how Industry 4.0 is marrying industrial automation with smart technology, artificial intelligence (AI), and modernized human-machine interfaces (HMI) to create a better-connected and more optimized ecosystem for conducting business. Learn form the industry experts about the best practices for creating secure, user-friendly graphical user interfaces (GUI) from the operating system on up for a future where smart machines are integrated into business processes.
  • Webinar: Edge Machine Learning - Project Tips & Tricks - December 10, 2021 [Register here]!
    • In this webinar, Toradex partner, Doulos, takes a fresh look at Edge Machine Learning. If you are looking to incorporate machine learning (ML) within your next embedded project, then this webinar will provide some useful direction to help you be successful - whether you build your own solutions or out-source.
  • Webinar: Working with Devicetrees - December 17, 2021 [Register here]!
    • In this webinar Toradex partner, Doulos, will demystify how hardware is described by the devicetree and how the Linux kernel can use the data provided by the devicetree description to configure how device drivers talk to the underlying hardware.

November 2021

  • Webinar: Meeting the Challenge of OTA for Embedded Linux Systems - November 23, 2021 [Register here]!
    • In this webinar we look at the challenges of managing the process of updating software on embedded Linux systems remotely – often referred to as an Over The Air or OTA update.

October 2021

  • Webinar: Python Magic Methods - October 20, 2021 [Register here]!
    • This webinar, presented by Doulos co-founder and Technical Fellow John Aynsley, will enable you to sharpen up your Python coding skills as we explore Python magic methods. This webinar is suitable for anyone wishing to improve their Python coding skills or their understanding of the Python language.
  • Webinar: Beyond Development: Torizon - October 26, 2021 [Register here]!
    • In this webinar, we discuss these fleet-scale challenges and how they're tamed by DevOps practices - embracing agility and continuous delivery to bridge development & operations. We consider the full technology stack: computing hardware, operating system, applications and cloud services, including over-the-air updates and fleet monitoring. And we introduce Torizon, a Linux-based industrial IoT platform that simplifies the development, maintenance, and operation of your distributed edge devices.

September 2021

  • Portuguese Webinar: Criando Distribuições de Linux Embarcado com Yocto Project - September 01, 2021 [Register here]!
    • Neste webinar, demonstraremos como utilizar o Yocto Project para gerar uma distribuição de Linux customizada para o NXView, um Panel PC Linux desenvolvido pela empresa Novus. O NXView é ideal para aplicações onde uma IHM é utilizada para controle de um equipamento embarcado. Além do display de 7 polegadas com touch capacitivo, o hardware possui diversas interfaces de entrada e saída que o tornam fácil de integrar.
  • Webinar: Managing Devices with Linux Device Drivers - September 08, 2021 [Register here]!
    • In this webinar we investigate the why and how of managing peripheral devices in an Arm-based embedded Linux system. Although this is a huge and complex subject area, we can still introduce some of the key concepts and start to appreciate the steps involved in writing a device driver.
  • Webinar: Why containers aren’t just for hipsters! - September 17, 2021 [Register here]!
    • Curious about the hype around software containers in the embedded and IoT industry? Here’s your chance to learn about the advantages and disadvantages of containers from the Toradex point of view. Toradex has been developing hardware and software solutions for the embedded/IoT market for more than 15 years and has deployed millions of devices in thousands of applications.
  • Portuguese Webinar: NXView – Panel PC Novus compatível com Toradex Colibri iMX6ULL - September 22, 2021 [Register here]!
    • Neste webinar relâmpago iremos demonstrar o Panel PC NXView desenvolvido pela Novus Automation. O NX View é compatível com os módulos Toradex Colibri iMX6ULL e prove uma plataforma pronta já com display, entradas e saídas digitais e analógicas, rede Ethernet e RS485 que está pronto para a aplicação em protótipos e também em produtos finais.

August 2021

  • Webinar: Python Coding Guidelines and Idioms - August 04, 2021 [Register here]!
    • This webinar, by Toradex Partner, Doulos, will give you four things: 1. A set of Python coding guidelines, which you can start using right away or use as a basis for creating your own project-specific coding guidelines. 2. Examples of how to write Pythonic code, that is, Python written in the style Python was meant to be written, as opposed to writing code using Python syntax but in the style of some other programming language. 3. A Python tutorial along the way, for those who are beginners in Python or who are more familiar with some other programming language. 4. A Jupyter Notebook to take away that contains all the guidelines and runnable code examples shown in the webinar, and a few more besides.
  • Webinar: Yocto Project hands-on with Toradex - August 25, 2021 [Register here]!
    • This webinar will discuss how backfeeding occurs and what it has to do with ESD protection. First, we will show techniques for discovering and measuring backfeeding. Figuring out where the backfeeding is coming from is often detective work for hunting the cause. After the sources are identified, it is time to talk about prevention. There are several ways to omit or reduce backfeeding in circuits. Some of these methods work only in certain situations, while others are complex. Finally, we will talk about the advantages and disadvantages of different solutions.
  • Webinar: Backfeeding: Hunting unintentional power paths - August 27, 2021 [Register here]!
    • This webinar will discuss how backfeeding occurs and what it has to do with ESD protection. First, we will show techniques for discovering and measuring backfeeding. Figuring out where the backfeeding is coming from is often detective work for hunting the cause. After the sources are identified, it is time to talk about prevention. There are several ways to omit or reduce backfeeding in circuits. Some of these methods work only in certain situations, while others are complex. Finally, we will talk about the advantages and disadvantages of different solutions.

July 2021

  • Webinar: Introduction to embedded Linux security - July 02, 2021 [Register here]!
    • In this webinar, an example of threat modeling to identify the security requirements of an embedded Linux system will be discussed, and a wide range of tools and techniques to implement the security requirements will be presented, including secure/verified boot, data integrity and encryption, TPM and key management, secure firmware update and patching, secure coding, sandboxing and containers, TEE, mandatory access control (SELinux, AppArmor, etc), authentication, port scanning, and many more!
  • Webinar: Linux Embarcado e Tecnologias Microsoft: Desenvolvimento de Interface Gráfica Utilizando C#, .NET e VS Code - July 21, 2021 [Register here]!
    • Neste webinar apresentaremos na prática o Uno Platform, demonstrando uma interface gráfica construída usando .NET 5, WinUI, UWP e XAML para interagir com sensores e pinos de uma placa de desenvolvimento Toradex Verdin IMX8 rodando a distribuição Linux industrial da plataforma Torizon.
  • Webinar: Getting Started with Yocto - July 21, 2021 [Register here]!
    • This webinar investigates how a minimal Linux system can be extended to include custom, packaged software. We demonstrate how standard Linux tools, such as gdbserver or the Target Communication Framework agent (TCF agent), drop out of the build system and can be used in a stand-alone SDK. In the process, key concepts of the Yocto Project build system such as recipes, tasks and layers will be introduced. A board from the Toradex Colibri Arm family of SoMs will be used as an example platform.

June 2021

  • Webinar: Developing embedded applications using CAN protocol in Qt on the Torizon platform - Portuguese - June 02, 2021 [Register here]!
    • This webinar aims to present and demonstrate the workflow for developing an embedded system application with a graphical interface and CAN communication for the TorizonCore operating system. This webinar is suitable for people who are interested in understanding how it develops using the Torizon Ecosystem, more specifically with a graphical interface and CAN communication.
  • Webinar: Using Python to Implement a Complete Machine Learning Flow - June 09, 2021 [Register here]!
    • The webinar will explore the Python language features needed both to prepare datasets and to code and train neural network models and examine the options available for using Python across the whole machine learning flow, from data gathering and curation through model training to deployment.

May 2021

  • Webinar: Meeting the Challenge of OTA for Embedded Linux Systems - May 14, 2021 [Register here]!
    • In this webinar we look at the challenges of managing the process of updating software on embedded Linux systems remotely – often referred to as an Over the Air or OTA update.
  • Webinar: Beyond Development: Torizon - May 21, 2021 [Register here]!
    • This webinar will discuss these fleet-scale challenges and how they're tamed by DevOps practices - embracing agility and continuous delivery to bridge development & operations. We'll consider the full technology stack: computing hardware, operating system, applications and cloud services, including over-the-air updates and fleet monitoring. And we’ll introduce Torizon, a Linux-based industrial IoT platform that simplifies the development, maintenance, and operation of your distributed edge devices.
  • Webinar: Anatomy of a Linux Device Driver - May 26, 2021 [Register here]!
    • This webinar will examine the role and structure of a Linux device driver, how it interacts with existing frameworks and subsystems within the Linux kernel.

April 2021

  • Webinar: Development and Maintenance of your Embedded Linux Vision System – Simplified! - April 07, 2021 [Register here]!
    • As one of the i.MX 8M Plus application processor ecosystem partners, Toradex will show ways to develop and maintain embedded Linux vision systems. In this webinar, we will take you from proof of concept to volume production, but we do not stop there. We will also discuss how to maintain your devices with software updates.
  • Webinar: Python Magic Methods - April 09, 2021 [Register here]!
    • This webinar, presented by Doulos co-founder and Technical Fellow John Aynsley, will enable you to sharpen up your Python coding skills as we explore Python magic methods. This webinar is suitable for anyone wishing to improve their Python coding skills or their understanding of the Python language.


March 2021

  • Webinar: Managing Devices with Linux Device Drivers - March 17, 2021 [Register here]!
    • In this webinar we investigate the why and how of managing peripheral devices in an Arm-based embedded Linux system. Although this is a huge and complex subject area, we can still introduce some of the key concepts and start to appreciate the steps involved in writing a device driver.


February 2021

  • Webinar: Using AI to convert GUI sketches into real embedded applications - February 10, 2021 [Register here]!
    • GUI (Graphical User Interface) development is one of the most time-consuming tasks in embedded systems projects. Accelerating GUI development is crucial to improve time-to-market but current solutions that promise this acceleration are tied to specific tools, which may force engineers and designers to learn a new tool. A completely agnostic solution is therefore a better choice, as engineers and designers can choose any tool to get the job done.
  • Webinar: Building Safe, High-Performing Systems Just Got Easier - February 18, 2021 [Register here]!
    • Join Blackberry QNX and Toradex for this one-hour webinar that introduces our new combined solution, and covers how it can help you meet all of your requirements faster on the i.MX 8 applications processors. Experts from both companies will discuss how you can easily build a proof-of-concept and quickly install the deterministic, microkernel QNX Neutrino RTOS on the Apalis iMX8 in just two clicks. They will also explore the benefits of pre-certified tooling for debugging and optimizations that come standard with QNX.
  • Webinar: Python Coding Guidelines and Idioms - February 24, 2021 [Register here]!
    • This webinar, by Doulos Co-Founder & Technical Fellow John Aynsley, will give you four things: A set of Python coding guidelines, which you can start using right away or use as a basis for creating your own project-specific coding guidelines. Examples of how to write Pythonic code, that is, Python written in the style Python was meant to be written, as opposed to writing code using Python syntax but in the style of some other programming language. A Python tutorial along the way, for those who are beginners in Python or who are more familiar with some other programming language. A Jupyter Notebook to take away that contains all the guidelines and runnable code examples shown in the webinar, and a few more besides. The webinar concludes with a brief overview of the Toradex SoM portfolio and Torizon software platform.

January 2021

  • Webinar: Getting Started with Yocto - January 22, 2021 [Register here]!
    • This webinar investigates how a minimal Linux system can be extended to include custom, packaged software. We demonstrate how standard Linux tools, such as gdbserver or the Target Communication Framework agent (TCF agent), drop out of the build system and can be used in a stand-alone SDK. In the process, key concepts of the Yocto Project build system such as recipes, tasks and layers will be introduced. A board from the Toradex Colibri Arm family of SoMs will be used as an example platform.

2020

December 2020

  • Webinar: Python for IoT Edge Devices - December 09, 2020 [Register here]!
    • As embedded devices continue to evolve with an ever increasing range of challenges, having an easy to use programming language like Python, with a rich set of existing modules available, and useful development tools can be absolutely invaluable - improving productivity, effectiveness and time-to-market of your connected products. In this joint webinar from Toradex and Doulos, you will learn how to use Python for IoT Edge Device applications, including the use of Python to access input & output (IO) devices, edge device to cloud-connectivity, local storage of edge parameters and hosting of a machine learning model.
  • Webinar: Simple and versatile power management with the Verdin System on Modules - December 10, 2020 [Register here]!
    • Verdin, the new System on Module standard from Toradex, brings future-proof pinout, a compact form factor, robustness and ease-of-use. One of the key aspects of the Verdin family is that the power requirements are simplified. The standard is battery-ready and you can even use a single-cell power supply thanks to the wide range supply input voltage. Also, the module itself is able to output 1.8V for modern peripherals. Add this to our Direct Breakout? technology and it all makes it so much easier to design your custom carrier board quicker than ever. In this lightning webinar, we'll introduce the power management concepts of the Verdin family. We'll go over all the available power states and cover some common use cases for powering embedded devices.
  • Lightning Webinar: Securing device updates with OSTree - December 15, 2020 [Register here]!
    • Modern devices require a safe and secure method of being updated. In this lighting webinar, you'll learn about OSTree, often described as "Git for Filesystem". We'll describe how it works and how it's used to revision control filesystems. Highlighting its use in Torizon, we'll show you how it integrates into a complete over-the-air remote update platform and facilitates software lifecycle management for fleets of deployed devices.


November 2020

  • Webinar: Get Started with Android 10 on NXPR i.MX 8 and i.MX 8X Applications Processors - November 12, 2020 [Register here]!
    • Learn how to get started with the latest Android 10 on the highest-end i.MX 8 and the very efficient i.MX 8X applications processors. Kynetics and Toradex partnered to create a streamlined way for you to build a proof of concept in no time, utilizing the Toradex Easy Installer for one-click installation. But we did not stop there ? together, via this webinar, we will demonstrate how the industrial-grade System on Modules(SoMs) from Toradex and the services from Kynetics will lower your time-to-market for your next project.
  • Webinar: Innovative Drag and Drop Hardware Development for Embedded Devices - November 18 , 2020 [Register here]!
    • Learn how Altium and Toradex enable customized embedded computing solutions without the need to draw schematics and layout boards. You will be introduced to Geppetto, a web-based design tool, which lets you create a carrier board for Toradex System on Modules. You choose the module, and draw the outline and drag the interfaces from an extensive portfolio of interfaces and peripherals. Geppetto also simplifies the creation of a Linux image supporting your custom board out-of-the-box. This includes Torizon, the easy-to-use industrial Linux Platform. Prototypes will be available in 7-20 days. In the webinar, we step you through the creation of a custom board featuring a Verdin System on Module with NXP i.MX 8M Mini applications processor.
  • Webinar: Develop Effective Deep Neural Network Solution for the Edge Devices - November 19, 2020 [Register here]!
    • Deep Neural Networks for Computer Vision in Edge Devices is a hot topic. New frameworks, accelerators, techniques, products, and solutions are available almost every day, and it is not easy to understand what is needed to get started. Resources-constrained edge devices not only require a working algorithm, but are required to choose the right technology and workflow to meet requirements. In this session, we will provide a gentle introduction of the terminology, the techniques for the most popular algorithms, and the typical project workflow to provide you with the required technical background to speed up your start into this new world of possibilities.
  • Webinar: Anatomy of a Linux Device Driver - November 20, 2020 [Register here]!
    • This webinar will examine the role and structure of a Linux device driver, how it interacts with existing frameworks and subsystems within the Linux kernel.
  • Webinar: UX Design and Safety in Medical Devices - November 05, 2020 [Register here]!
    • The graphical user interface (GUI) is an important element for any application but it is especially vital when the device, and it’s proper or improper use, impacts human life. When every second counts, having an intuitive user experience that reduces human error and streamlines device use is as important as ensuring safety and security. How can developer’s best manage these requirements while still meeting the accelerating demands for new features? Join us for this one-hour webinar to learn best practices for user-friendly graphical user interface (GUI) design and how to build a safe and secure device, from the operating system on up.
  • Webinar: Zero to Hero Visual Studio Code for Embedded Linux Development - November 06, 2020 [Register here]!
    • Interested in learning how you can develop your application with Visual Studio (VS) or Visual Studio Code (VS Code), while also taking advantage of the large Linux ecosystem? Toradex allows you to develop and debug Linux devices in the same way you program for your PC or Windows device. Plugins for VS and VSCode - currently supported are C/C++, Python, Qt and .Net Core - simplify your development workflow. We utilize Torizon on the device side. Torizon is an open-source industrial Linux distribution with a focus on ease-of-use and maintainability. Torizon is based on the proven Toradex Yocto Project BSP and includes a Docker runtime and an automotive-grade update client. Torizon is abstracting many of the difficulties of embedded Linux and lets you focus on your applications. Development tools such as the Security Advisor, Device Tree Configuration, Flash Analytics and the integration with IDEs further simplify development. Experience how to get started from zero - write your first program, deploy and debug it - live!

October 2020

  • Webinar: UX Design and Safety in Medical Devices - October 29, 2020 [Register here]!
    • The graphical user interface (GUI) is an important element for any application but it is especially vital when the device, and it’s proper or improper use, impacts human life. When every second counts, having an intuitive user experience that reduces human error and streamlines device use is as important as ensuring safety and security. How can developer’s best manage these requirements while still meeting the accelerating demands for new features? Join us for this one-hour webinar to learn best practices for user-friendly graphical user interface (GUI) design and how to build a safe and secure device, from the operating system on up.
  • Webinar: Get Started with MIPI-CSI Cameras for Embedded Computer Vision - October 16, 2020 [Register here]!
    • Progress in Computer Vision algorithms such as Deep Learning and ever more performant small embedded systems enable many new use cases. Cameras can now be tightly integrated into an embedded system, as interfaces such as Ethernet and USB are too bulky and add a layer of complexity. The most direct way to connect a modern Camera Sensor is via the MIPI CSI-2. In this webinar, we will show you how the collaboration between e-con Systems and Toradex simplifies the integration of cameras in your products considering both, hardware and software. We will show you the out-of-the-box experience to your first simple OpenCV program and will give you tips and tricks along the way. Additionally, we will explain the most important features to be kept in mind when selecting a camera. We will utilize the latest i.MX 8QuadMax and i.MX 8M Mini applications processors from NXP® on Toradex’s Apalis and Verdin System on Modules(SoMs). On the software side, we will use Torizon and open-source embedded Linux with a focus on the ease-of-use.
  • Webinar: Managing Devices with Linux Device Drivers - October 21, 2020 [Register here]!
    • In this webinar we investigate the why and how of managing peripheral devices in an Arm-based embedded Linux system. Although this is a huge and complex subject area, we can still introduce some of the key concepts and start to appreciate the steps involved in writing a device driver.
  • Webinar: EtherCAT Master Software - from Setup to Application Implementation in no time! - October 28, 2020 [Register here]!
    • EtherCAT is a high-performance, low-cost, easy to use Industrial Ethernet technology with a flexible topology. The only hardware required by the master device is the on-board Ethernet controller. That means that with just a standard Ethernet port, a master device can implement a hard real-time network solution. The Ethernet controller is integrated via Direct Memory Access (DMA), so no CPU capacity is required for the data transfer between the master device and the network. The EC-Master protocol stack is sophisticated, high-performance EtherCAT master software out-of-the-box available on many NXP® i.MX based Toradex SoM boards.

September 2020

  • Webinar: Introduction to Torizon – Japanese - September 24 2020 (ONLINE) Register here!
    • Toradex has created its new Industrial Embedded Linux Software Platform to continue with its eternal motto of “Make Embedded Systems simple”. Torizon’s objective is to make application development more accessible and allow customers to start providing their own added value right from the beginning, avoiding complicated initial setups or opaque development flows. In this webinar we will make a presentation of the Torizon platform, its components and show a short introduction to application development with Torizon. If you want to better understand what Torizon is, how it can improve your development costs and time, and how to get started, feel free to join this webinar. Torizon is here to stay.

August 2020

  • Webinar: Jumpstart your next high-speed PCB design with our experts! [Register here]!
    • The PCB design is the key source and solution for EMC issues. In this webinar, we will explore different stackup examples and try to improve them. We highlight the changes in impedance basis the geometry of the trace and the PCB stackup. We demonstrate how Altium can be used for calculating the trace geometry to get the desired impedance. We will discuss the different length matching requirements of the interfaces and how we can set up rules in Altium Designer. We also learn how Altium Designer can ease the length matching in a complex design.

July 2020

  • Webinar: Achieving exceptional graphics for IoT devices of tomorrow with i.MX 8 and Crank Software - July 24, 2020 [Register here]!
    • Learn about how Toradex's industry-proven SoM boards make it easy to develop smart, connected, power-efficient devices for general purpose industrial, medical, and IoT application markets. In addition, Crank Software will demonstrate how to create rich, interactive user interfaces that are optimized for power consumption efficiency for the Verdin iMX8M Mini and iMX8M Nano applications processors using their UI design and development solution, Storyboard.
  • Webinar: Python for IoT Edge Devices - July 31, 2020 [Register here]!
    • As embedded devices continue to evolve with an ever increasing range of challenges, having an easy to use programming language like Python, with a rich set of existing modules available, and useful development tools can be absolutely invaluable - improving productivity, effectiveness and time-to-market of your connected products. In this joint webinar from Toradex and Doulos, you will learn how to use Python for IoT Edge Device applications, including the use of Python to access input & output (IO) devices, edge device to cloud-connectivity, local storage of edge parameters and hosting of a machine learning model.

June 2020

  • Regional conference in Japan - Tokyo, Japan, June 5 2020 (Nakano Sunplaza, 8F room 1) - Japan Technical Jamboree 73
    • [NOTE] The organizer considering to cancel or switch to on-line style.
    • EVENT CANCELLED due to Novel Corona Virus concern.
  • Webinar: Getting Started with Yocto: Meeting the challenge of Embedded Linux deployment - June 24, 2020 [Register here]
    • In this webinar, Toradex's partner, Doulos, brings forth an interesting training webinar, which delves into how a minimal Linux system can be extended to include custom, packaged software. Doulos demonstrates how standard Linux tools, such as gdbserver or the Target Communication Framework agent (TCF agent), drops out of the build system and can be used in a stand-alone SDK. In the process, key concepts of the Yocto Project build system such as recipes, tasks and layers will be introduced. A board from the Toradex Colibri Arm family of SoMs will be used as an example platform.
  • Webinar: Benchmarking GPU performance of embedded Linux SoCs with Qt - June 25, 2020 Register here!
    • If you’re familiar with embedded Linux for System on Chips (SoCs) and have been wondering which platform would be ideal when it comes to meeting even higher performance requirements – especially with high-resolution graphics at 720p and full HD – then this webinar is for you!

May 2020

  • Webinar: Managing Devices with Linux Device Drivers - May 13, 2020 (Online Webinar)
    • In this webinar, Toradex partner, Doulos, investigates the why and how of managing peripheral devices in an Arm®-based embedded Linux system. Although this is a huge and complex subject area, one can still introduce some of the key concepts and thereby start to appreciate the steps involved in writing a device driver. Register! https://www.toradex.com/webinars/manage-devices-with-linux-device-drivers
  • Webinar: Build your own Embedded Carrier Board, easily! - May 13, 2020 (Online Webinar)
    • In this webinar, we show you how easy it is to design your own embedded carrier board for Toradex's computer on modules. We begin by showing the differences between the Toradex computer on module families with a focus on the new Verdin computer on module family. We will guide you through the wide range of reference schematics and design guides provided by Toradex. Register! https://www.toradex.com/webinars/build-your-own-embedded-carrier-board-easily
  • Webinar: Introduction to embedded Linux security - May 29, 2020 (Online Webinar)
    • In this webinar, an example of threat modeling to identify the security requirements of an embedded Linux system will be discussed, and a wide range of tools and techniques to implement the security requirements will be presented, including secure/verified boot, data integrity and encryption, TPM and key management, secure firmware update and patching, secure coding, sandboxing and containers, TEE, mandatory access control (SELinux, AppArmor, etc), authentication, port scanning, and many more! Register! https://www.toradex.com/webinars/embedded-linux-security-introduction

April 2020

  • Webinar: Creating GUI for Toradex modules with TotalCross Open Source SDK - April 08, 2020 (Online Webinar)

March 2020

  • Regional conference in Japan - Tokyo, Japan, March 6, 2020 (Nakano Sunplaza, 8F room 2) - Japan Technical Jamboree 72
    • EVENT CANCELLED due to Novel Corona Virus concern.
    • COMPENSATION Some presentation will be performed using WebEx. The detail will be announced via "celinux-dev" mailinglist.
  • Webinar: Simplify Modern Product Development with the Verdin iMX8M Mini and Nano SoMs - March 20, 2020 (Online Webinar)
  • Webinar: Python in One Hour - March 27, 2020 (Online Webinar)

February 2020

  • Webinar: Jumpstart cloud-connected computer vision and ML designs - February 06, 2020 (Online Webinar)
    • Join Toradex's upcoming webinar with partners NXP and AWS, to learn how you can jumpstart cloud-connected computer vision and machine learning designs using the Apalis AI Vision Starter Kit with NXP's i.MX 8QuadMax Applications Processor. Register today and also stand a chance to win a complimentary starter kit on attending*! More details at https://register.gotowebinar.com/rt/6695606203214368514?source=Toradex

January 2020

2019

December 2019

November 2019

  • Webinar: Develop faster with the i.MX 8QuadMax processor, presented by Toradex and NXP® - November 07, 2019 (Online Webinar)

October 2019

  • Webinar: Getting Started with System on Modules, and Torizon - an Industrial Linux Platform - October 18, 2019 (Online Webinar)
  • Webinar: Build your own OTA-updatable Embedded Linux Distribution from Prototype to Production - October 25, 2019 (Online Webinar)

September 2019

  • Regional conference in Japan - Tokyo, Japan, September 20 (date changed) 2019 (Nakano Sunplaza, 8F room 1) - Japan Technical Jamboree 70

August 2019

July 2019

  • Webinar: AI2GO: A New, Self-Serve Platform for Deploying AI at the Edge - July 25, 2019 (Online Webinar)

June 2019

  • Webinar: Introducing Torizon: An Easy-to-use Industrial Linux Platform - June 07, 2019 (Online Webinar)

May 2019

  • e-con Systems delighted to invite you to our Booth # 973 at ESC Boston 2019, Boston Convention & Exhibition Centre in Boston, MA, USA. (May 15 - 16 2019). Click here to register! https://www.e-consystems.com/events/esc-boston-2019.asp
  • Regional conference in Japan - Tokyo, Japan, May 24 2019 (Nakano Sunplaza, 8F room 1) - Japan Technical Jamboree 69
  • Toradex IoT Security Tech Day with NXP® - May 21, 2019 (Munich, Germany)
    • Are you interested in learning all about NXP's ready-to-use secure element for IoT devices? Join Toradex and NXP in Munich on May 21, 2019, to learn all about NXP's A71CH: Plug & Trust - The fast, easy way to deploy secure IoT connections. In this hands-on session, you will get to know about Torizon Secure Updates with A71CH Security Element and Colibri iMX8X. Register now! https://www.toradex.com/events/toradex-iot-security-tech-day-with-nxp-germany-2019

March 2019

  • Get Started with Embedded Linux and SW Containers - March 21, 2019 (Seattle, WA)


February 2019

  • Webinar: Managing Devices with Linux Device Drivers - February 08, 2019 (Online Webinar)

2018

December 2018

  • LinuxLab 2018 - Florence, Italy, December 3-4 2018. LinuxLab - Building smarter devices - is the conference on Linux, kernel, embedded, build systems, security, virtualization technologies and open source. LinuxLab is organized by Develer, the company who launched events like Better Software, Better Embedded, QtDay, PyCon and EuroPython.

November 2018

  • e-con Systems delighted to invite you to our Hall 1 Booth 1A23 at the VISION 2018, Stuttgart, Germany(November 06 - 08 2018). Click here to register!

https://www.e-consystems.com/vision_show_register2018.asp

  • Webinar: Getting Started with Yocto - Meeting the challenge of Embedded Linux deployment - November 30 2018 (Online Webinar)

October 2018

  • Guest Webinar: Harness the Power of Database for IoT Edge Device Data Management - October 17, 2018 (Online Webinar)

September 2018

August 2018

  • Guest Webinar: Simple Provisioning and OTA Update of Connected Embedded Linux Devices - August 23, 2018 (Online Webinar)
    • Join us next month for our guest webinar by Mender and learn how to use Mender OTA update manager for connected Linux devices. The initial provisioning of the devices will be demonstrated using the Toradex Easy Installer onto a Toradex Colibri iMX7 platform. Further updates will be performed OTA using the Mender update management solution connecting to the Hosted Mender cloud-based server. Get your free registrations now! https://www.toradex.com/webinars/simple-provisioning-and-ota-update-of-connected-embedded-linux-devices


June 2018

  • Guest Webinar: Heterogeneous Multiprocessing with Android on NXP i.MX 7 - June 06, 2018 (Online Webinar)

May 2018

  • Toradex Technology Workshop, in collaboration with Gusto Controls - Pune, India - May 31, 2018

April 2018

  • e-con Systems delighted to invite you to our Booth 1018 at AIA Vision Show 2018, Hynes Convention Center, Boston, USA(April 10 - 12 2018). click here to register!

https://www.e-consystems.com/vision_show_2018_register.asp

March 2018

  • Prototype to Product - by Toradex - March 08, 2018 (Seattle, USA)
  • Webinar: Developing the Next Generation of IoT Embedded Systems with Low Risk and Great Scalability - March 28, 2018 (Online Webinar)


February 2018


January 2018

2017

December 2017

  • Regional conference in Japan - Tokyo, Japan, December 1, 2017 (Nakano Sunplaza Room 8) - Japan Technical Jamboree 63
  • e-con Systems delighted to invite you to our Booth 1637 at Embedded Systems Conference (ESC) Silicon Valley, San Jose, CA(December 6-7,2017). click here to register!

https://www.e-consystems.com/esc-2017_register.asp

November 2017

  • Webinar: Introducing the new Colibri SoM based on the NXP i.MX 6ULL SoC - November 29, 2017 (Online Webinar)

October 2017

  • Guest webinar: QNX 7.0 on Toradex NXP® i.MX based Computer Modules - October 17, 2017 (Online Webinar)

September 2017

  • Guest webinar: Secure Over-The-Air Updates - September 27, 2017 (Online Webinar)

August 2017

  • Guest webinar: Demystifying Device Tree for NXP® i.MX Processors - August 08, 2017 (Online Webinar)

June 2017

May 2017

  • Embedded Systems Conference 2017 - May 3–4, 2017 | Boston Convention & Exhibition Center | Boston, MA
  • Webinar: First Steps with Heterogeneous Multicore Processing on the NXP i.MX 7 - May 31, 2017 (Online Webinar)

April 2017

  • Getting Started with Embedded Linux for ARM Architecture - Part 1: Getting Started with Linux - Campinas, SP, Brazil - April 24, 2017
    • Join Toradex’s much anticipated talk next week on “Getting Started with Linux Embedded for ARM Architecture” hosted by Embarcados. More details @ http://tinyurl.com/linux-arm-1

March 2017

  • Embedded World 2017 - The Industry’s Leading Embedded Systems Event - March 14 -16, 2017
  • Guest Webinar: Leveraging SQL to easily build Smart, Data-Driven, Connected IoT Devices - March 30, 2017 (Online Webinar)

February 2017

  • Guest Webinar: Secure your Embedded Device with Prove & Run and Toradex - February 16, 2017 (Online Webinar)

January 2017

2016

December 2016

November 2016

  • Embedded Linux with Yocto Boot Camp by Toradex - November 23-25, 2016 (Munich, Germany)

October 2016

  • Regional conference in Japan (Mini Jamboree "Test framework and Fuego" ) - Tokyo, Japan, October 27, 2016 (Sony HQ, SAP Creative Lounge) - Japan Technical Jamboree 58-1

September 2016

August 2016

July 2016

  • Embedded Linux with Yocto Boot Camp by Toradex - July 20-22, 2016 (Frankfurt, Germany)

June 2016

  • Regional conference in Japan - Tokyo, Japan, June 3, 2016 (Nakano Sunplaza Room 6) - Japan Technical Jamboree 57
  • Regional conference in Japan (Mini Jamboree "Uncle Jenkins Get Together (Discussion about Test Framework)" ) - Tokyo, Japan, June 30, 2016 (Sony HQ, SAP Creative Lounge) - Japan Technical Jamboree 57-1

April 2016

March 2016

February 2016

2015

December 2015

November 2015

October 2015

September 2015

June 2015

April 2015

March 2015

2014

December 2014

October 2014

September 2014

  • Fossetcon 2014 - Free and Open Source Software Expo and Technology Conference, Orlando, FL, September 11 - 13, 2014

July 2014

May 2014

April 2014

2013

December 2013

October 2013

September 2013

August 2013

July 2013

June 2013

May 2013

March 2013

February 2013

Brussels, Belgium

Brussels, Belgium

San Francisco, CA, Feb 18-19, 2013

2012

December 2012

November 2012

September 2012

August 2012

July 2012

June 2012

April 2012

March 2012

February 2012

2011

  • linux.org.au Conference -- Brisbane, Queensland, Australia. 16th-22nd of January 2010.
  • Regional conference in Japan - Tokyo, Japan, March 18, 2011 - Japan Technical Jamboree 36
    • Due to unstable electrical and public transportation situation in Greater Tokyo area, this event was canceled.

2010

2009

2008

2007

2006

2005

2004

Links to Papers from other events

Presentations at Kernel Summits

Event Planning Pages

ELC Conference Presentations

Retrieved from "https://elinux.org/index.php?title=Events&oldid=570866"