File:Adxl335Bone.jpg

From eLinux.org
Revision as of 21:40, 22 September 2012 by Hansenrl (talk | contribs)
Jump to: navigation, search
Original file(3,264 × 1,840 pixels, file size: 2.18 MB, MIME type: image/jpeg)

The ADXL335 accelerometer connected to a Beagle Bone.

The Z axis is connected to AIN0, Y to AIN2, and X to AIN6. The ADXL335 is powered by the 3.3 V output on the P9 connector (Pin 3), which means that the accelerometer output must be divided into the 0-1.8 V range (voltage dividers shown here with 10kOhm resistors).

A 1 uF capacitor is placed between Vs and GND to help reduce noise in the accelerometer output.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:32, 22 September 2012Thumbnail for version as of 21:32, 22 September 20123,264 × 1,840 (2.18 MB)Hansenrl (talk | contribs)The ADXL335 accelerometer connected to a Beagle Bone.
  • You cannot overwrite this file.

The following page links to this file:

Metadata