Difference between revisions of "Flameman/pcb-laser-exposer"
< Flameman
(→idea) |
(→where to buy (proof list)) |
||
| Line 13: | Line 13: | ||
* Lilly-Electronics on ebay | * Lilly-Electronics on ebay | ||
| − | * [http://www.o-like.com/index.php?main_page=product_info&cPath=8&products_id=92&zenid=3f04n3smvhgneu3ckvmhuihsv7] | + | * [http://www.o-like.com/index.php?main_page=product_info&cPath=8&products_id=92&zenid=3f04n3smvhgneu3ckvmhuihsv7 o-like] |
== Canon LBP1210 == | == Canon LBP1210 == | ||
Revision as of 16:47, 8 April 2012
Contents
pcb laser exposer
idea
File:Flameman/pcb-laser-exposer-idea.gif
File:Flameman/pcb-laser-exposer-beam.jpg
where to buy (proof list)
laser @ 405nm ??
- Lilly-Electronics on ebay
- o-like
Canon LBP1210
laser
mirror motor
M63154AFP
3-phase Brushless driver
______________
VCC |1 \__/ 36| nc
RS |2 35| Limit
FLT |3 34| Vref
B1 |4 33| Vctl
PS |5 * 32| /Acc <-----
phase.U |6 * 31| /Dec <-----
pahse.V |7 30| RCP
Gnd |8 29| Gnd
Gnd |9 28| Gnd
Gnd |10 27| Gnd
Gnd |11 26| Gnd
phase.W |12 25| SGnd
HU+ |13 24| OSCV
HU- |14 23| OSCC
HV+ |15 22| FG-
HV- |16 21| FG+
HW+ |17 20| Amp.out
HW- |18 19| FGout
|______________|
output current
ACC DEC VCTL(CPout) Function
------------------------------------------------
H(5V) H(5V) 0uA Hold
H(5V) L(0V) -200uA Deceleration
L(0V) H(5V) +200uA Acceleration
L(0V) L(0V) 0uA Hold
Cable Pin Symbol Function
---------------------------------------------------------------------
1 Vcc Power supply
2 RS Current sense
3 FLT Connect to application of filter
4 B1 Short brake switch
5 PS Power save signal input
6 U Motor phase U output
7 V Motor phase V output
8..11 Gnd Power Gnd
12 W Motor phase W output
13 Hu+ Hall sensor signal input (U phase +)
14 Hu- Hall sensor signal input (U phase -)
15 Hv+ Hall sensor signal input (V phase +)
16 Hv- Hall sensor signal input (V phase -)
17 Hw+ Hall sensor signal input (W phase +)
18 Hw- Hall sensor signal input (W phase
19 FGout FG comparator output
20 Amp.out FG amp. output
21 FG+ FG signal input (+)
22 FG- FG signal input (-)
23 OSCC OFF Timer setup -1
24 OSCV OFF Timer setup -2
25 SGnd Gnd
26..29 Gnd Power Gnd
30 RCP Charge pump output current setup term.
31 DEC Deceleration signal input
32 ACC Acceleration signal input
33 VCTL Motor speed control voltage input
34 VREF Reference voltage input
35 LIMIT Current limit set up terminal
36 N.C. N.C
