Flameman/sgi/octane-dmesg
For more interesting projects done by Flameman, be sure to check out his project index
Back to Flameman/sgi
dmesg
kernel-2.6.29
version 2.6.29.1-mipsgit-20090324-sgi-octane2-1xR12K compiled with gcc version 4.3.5 (Gentoo 4.3.5 p1.1) ) 1 SMP PREEMPT Tue Jul 23 05:12:44 CEST 2013 ARCH: SGI-IP30 PROMLIB: ARC firmware Version 64 Revision 0 CPU revision is: 00000e35 (R12000) FPU revision is: 00000900 Checking for the multiply/shift bug... no. Checking for the daddiu bug... no. Silicon Graphics Octane (IP30) support: (c) 2004-2007 Stanislaw Skowronek. Detected 1280 MB of physical memory. Updating PROM memory size. xtalk: Detected XBow (revision 2.0) at 0. xtalk: Detected Heart (revision F) at 8. xtalk: Detected HQ4 / ImpactSR (revision B) at 10. xtalk: Detected Buzz / Odyssey (revision B) at 11. xtalk: Detected Bridge (revision D) at 15. BRIDGE chip at xtalk:15, initializing... registering PCI controller with io_map_base unset Determined physical RAM map: memory: 0000000000004000 @ 0000000000000000 (reserved) memory: 0000000000d44000 @ 0000000020004000 (reserved) memory: 00000000001b8000 @ 0000000020d48000 (usable) memory: 0000000000100000 @ 0000000020f00000 (ROM data) memory: 000000003f000000 @ 0000000021000000 (usable) memory: 0000000010000000 @ 0000000060000000 (reserved) memory: 0000000010000000 @ 0000000060000000 (usable) Wasting 7530432 bytes for tracking 134472 unused pages Initrd not found or empty - disabling initrd Zone PFN ranges: DMA 0x00000000 -> 0x000a0000 Normal 0x000a0000 -> 0x000a0000 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x00000004 0: 0x00020004 -> 0x00070000 On node 0 totalpages: 327680 free_area_init_node: node 0, pgdat a8000000204cb080, node_mem_map a800000021000000 DMA zone: 6272 pages used for memmap DMA zone: 0 pages reserved DMA zone: 321408 pages, LIFO batch:31 Detected 1 enabled CPU(s). Built 1 zonelists in Zone order, mobility grouping on. Total pages: 321408 Kernel command line: ip=on console=ttyS0,9600 rdinit=/sbin/init init=/bin/bash Primary instruction cache 32kB, VIPT, 2-way, linesize 64 bytes. Primary data cache 32kB, 2-way, VIPT, no aliases, linesize 32 bytes Unified secondary cache 2048kB 2-way, linesize 128 bytes. IP30: interrupt controller initialized. PID hash table entries: 4096 (order: 12, 32768 bytes) IP30: initializing timer. 400 MHz CPU detected start_kernel(): bug: interrupts were enabled early Console: colour dummy device 80x25 Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Memory: 1267076k/1296096k available (3708k kernel code, 28276k reserved, 1215k data, 8360k init, 0k highmem) Calibrating delay loop... 618.49 BogoMIPS (lpj=309248) Mount-cache hash table entries: 256 Checking for the daddi bug... no. Brought up 1 CPUs net_namespace: 560 bytes NET: Registered protocol family 16 bio: create slab <bio-0> at 0 SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb pci 0000:00:00.0: reg 10 io port: [0x200000-0x2000ff] pci 0000:00:00.0: reg 14 32bit mmio: [0x200000-0x200fff] pci 0000:00:00.0: reg 30 32bit mmio: [0x210000-0x21ffff] pci 0000:00:01.0: reg 10 io port: [0x400000-0x4000ff] pci 0000:00:01.0: reg 14 32bit mmio: [0x400000-0x400fff] pci 0000:00:01.0: reg 30 32bit mmio: [0x410000-0x41ffff] pci 0000:00:02.0: reg 10 32bit mmio: [0x500000-0x5fffff] pci 0000:00:03.0: reg 10 32bit mmio: [0x600000-0x601fff] IP30: HEART ATTACK! Caught errors: 0x0040! interrupt #63 interrupt #57 Switched to high resolution mode on CPU 0 NET: Registered protocol family 2 IP route cache hash table entries: 65536 (order: 7, 524288 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered NET: Registered protocol family 1 squashfs: version 4.0 (2009/01/31) Phillip Lougher EFS: 1.0a - http://aeschi.ch.eu.org/efs/ msgmni has been set to 2476 alg: No test for stdrng (krng) io scheduler noop registered io scheduler deadline registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled loop: module loaded qla1280: QLA1040 found on PCI bus 0, dev 0 BRIDGE: IO #0, size 0x100 for little-endian 0000:00:00.0 --> direct I/O at bus 0x01000000 vma 0x000000f101000000 BRIDGE: Memory #1, size 0x1000 for little-endian 0000:00:00.0 --> direct 32-bit at bus 0x01000000 vma 0x000000f041000000 BRIDGE: Memory #6, size 0x10000 for little-endian 0000:00:00.0 --> direct 32-bit at bus 0x01010000 vma 0x000000f041010000 PCI: Enabling device 0000:00:00.0 (0006 -> 0007) scsi(0:0): Resetting SCSI BUS scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 qla1280: QLA1040 found on PCI bus 0, dev 1 BRIDGE: IO #0, size 0x100 for little-endian 0000:00:01.0 --> direct I/O at bus 0x01000100 vma 0x000000f101000100 BRIDGE: Memory #1, size 0x1000 for little-endian 0000:00:01.0 --> direct 32-bit at bus 0x01020000 vma 0x000000f041020000 BRIDGE: Memory #6, size 0x10000 for little-endian 0000:00:01.0 --> direct 32-bit at bus 0x01030000 vma 0x000000f041030000 PCI: Enabling device 0000:00:01.0 (0006 -> 0007) scsi(1:0): Resetting SCSI BUS scsi1 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 st: Version 20081215, fixed bufsize 32768, s/g segs 256 Driver 'st' needs updating - please use bus_type methods Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods usbmon: debugfs is not available ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96 uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver mice: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18a. BRIDGE: Memory #0, size 0x2000 for little-endian 0000:00:03.0 --> direct 32-bit at bus 0x01040000 vma 0x000000f041040000 ALSA device list: #0: SGI RAD Audio at 0xf041040000 BRIDGE: Memory #0, size 0x100000 for little-endian 0000:00:02.0 --> direct 32-bit at bus 0x01100000 vma 0x000000f041100000 IOC3 part: [030-0891-003], serial: [MBX420] => class IP30 system BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020224758>] misc_register+0x160/0x268 [<a800000020236ecc>] ioc3led_probe+0x6c/0x1e0 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020224758>] misc_register+0x160/0x268 [<a800000020237cac>] ioc3rtc_probe+0x74/0x260 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a80000002024361c>] device_del+0x164/0x1c0 [<a80000002024368c>] device_unregister+0x14/0x28 [<a8000000202436ec>] device_destroy+0x4c/0x60 [<a80000002023849c>] uart_remove_one_port+0xbc/0x150 [<a800000020240344>] serial8250_register_port+0x12c/0x360 [<a800000020241f88>] ioc3uart_probe+0x178/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 0000:00:02.0: ttyS0 at IOC3 0xf041120178 (irq = 64) is a 16550A console [ttyS0] enabled BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020218304>] tty_register_device+0x114/0x170 [<a800000020238e34>] uart_add_one_port+0x1e4/0x4e0 [<a8000000202403e8>] serial8250_register_port+0x1d0/0x360 [<a800000020241f88>] ioc3uart_probe+0x178/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a80000002024361c>] device_del+0x164/0x1c0 [<a80000002024368c>] device_unregister+0x14/0x28 [<a8000000202436ec>] device_destroy+0x4c/0x60 [<a80000002023849c>] uart_remove_one_port+0xbc/0x150 [<a800000020240344>] serial8250_register_port+0x12c/0x360 [<a800000020241fa8>] ioc3uart_probe+0x198/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 0000:00:02.0: ttyS1 at IOC3 0xf041120170 (irq = 64) is a 16550A BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a800000020243fd0>] device_create_vargs+0x100/0x118 [<a80000002024400c>] device_create+0x24/0x30 [<a800000020218304>] tty_register_device+0x114/0x170 [<a800000020238e34>] uart_add_one_port+0x1e4/0x4e0 [<a8000000202403e8>] serial8250_register_port+0x1d0/0x360 [<a800000020241fa8>] ioc3uart_probe+0x198/0x1f8 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 Ethernet address is 08:00:69:13:a8:d1. eth0 (SGI IOC3): not using net_device_ops yet BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: Call Trace: [<a800000020010c90>] dump_stack+0x8/0x48 [<a8000000200119c0>] schedule+0x510/0x9f0 [<a800000020012268>] schedule_timeout+0x110/0x170 [<a8000000200113ec>] wait_for_common+0x164/0x190 [<a80000002005ebd4>] call_usermodehelper_exec+0x94/0xc8 [<a8000000201e2470>] kobject_uevent_env+0x4f8/0x530 [<a800000020243d4c>] device_add+0x5e4/0x740 [<a8000000203327a8>] register_netdevice+0x400/0x608 [<a8000000203329f4>] register_netdev+0x44/0x68 [<a80000002000ecb0>] ioc3eth_probe+0x358/0x518 [<a800000020318934>] ioc3_probe+0x5ac/0xdc0 [<a8000000201f9924>] local_pci_probe+0x1c/0x28 [<a8000000201f9c4c>] pci_device_probe+0x84/0xb0 [<a800000020246ba4>] driver_probe_device+0xdc/0x278 [<a800000020246de8>] __driver_attach+0xa8/0xb0 [<a8000000202460c0>] bus_for_each_dev+0x60/0xc8 [<a800000020245708>] bus_add_driver+0x2a0/0x388 [<a80000002024708c>] driver_register+0x84/0x190 [<a8000000201fa1b8>] __pci_register_driver+0x60/0xe0 [<a800000020014ac0>] __kprobes_text_end+0x48/0x1e8 [<a8000000204d346c>] kernel_init+0x298/0x348 [<a800000020017770>] kernel_thread_helper+0x10/0x18 eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 eth0: Using PHY 1, vendor 0x15f42, model 2, rev 3. eth0: IOC3 SSRAM has 128 kbyte. IOC3 Master Driver loaded for 0000:00:02.0 atkbd.c: keyboard reset failed on ioc3/serio0kbd atkbd.c: keyboard reset failed on ioc3/serio0aux TCP cubic registered NET: Registered protocol family 17 Freeing prom memory: 1024k freed Freeing unused kernel memory: 8360k freed bash #
notes
kernel-2.6.17.4
version 2.6.17.14-crazed-snow-weasel-sgi-octane-2xr12k gcc version 4.1.2 (Gentoo 4.1.2 p1.0.1)) SMP Mon Jun 2 23:15:07 CEST 2008 ARCH: SGI-IP30 PROMLIB: ARC firmware Version 64 Revision 0 CPU revision is: 00000e35 FPU revision is: 00000900 Silicon Graphics Octane (IP30) support: (c) 2004, 2005 Stanislaw Skowronek. Detected 2048 MB of physical memory. Updating PROM memory size. xtalk: Detected XBow (revision 2.0) at 0. xtalk: Detected Heart (revision F) at 8. xtalk: Detected HQ4 / ImpactSR (revision B) at 10. xtalk: Detected Buzz / Odyssey (revision B) at 11. xtalk: Detected Bridge (revision D) at 15. BRIDGE chip at xtalk:15, initializing... Determined physical RAM map: memory: 0000000000004000 @ 0000000000000000 (reserved) memory: 0000000000efc000 @ 0000000020004000 (usable) memory: 0000000000100000 @ 0000000020f00000 (ROM data) memory: 000000003eff0000 @ 0000000021000000 (usable) memory: 0000000040010000 @ 000000005fff0000 (reserved) memory: 0000000040000000 @ 0000000060000000 (usable) SGI Octane system with >2GB physical memory, limiting DMA. On node 0 totalpages: 655360 DMA zone: 655360 pages, LIFO batch:31 Built 1 zonelists Kernel command line: root=/dev/sda3 ro Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 32kB, 2-way, linesize 32 bytes. Unified secondary cache 2048kB 2-way, linesize 128 bytes. Synthesized TLB refill handler (41 instructions). Synthesized TLB load handler fastpath (55 instructions). Synthesized TLB store handler fastpath (55 instructions). Synthesized TLB modify handler fastpath (54 instructions). IP30: interrupt controller initialized. PID hash table entries: 4096 (order: 12, 32768 bytes) IP30: initializing timer. 400 MHz CPU detected Using 200.490 MHz high precision timer. Console: colour dummy device 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2048768k/2096048k available (3287k kernel code, 46788k reserved, 806k data, 228k init, 0k highmem) Calibrating delay loop... 598.01 BogoMIPS (lpj=299008) Mount-cache hash table entries: 256 Checking for 'wait' instruction... unavailable. Checking for the multiply/shift bug... no. Checking for the daddi bug... no. Checking for the daddiu bug... no. CPU revision is: 00000e35 FPU revision is: 00000900 Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes. Primary data cache 32kB, 2-way, linesize 32 bytes. Unified secondary cache 2048kB 2-way, linesize 128 bytes. Synthesized TLB refill handler (41 instructions). Calibrating delay loop... 600.06 BogoMIPS (lpj=300032) Brought up 2 CPUs migration_cost=2000 NET: Registered protocol family 16 SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Scanning bus 0000:00 PCI: Found 0000:00:00.0 [1077/1020] 000100 00 PCI: Calling quirk a8000000201b2bc8 for 0000:00:00.0 PCI: Found 0000:00:01.0 [1077/1020] 000100 00 PCI: Calling quirk a8000000201b2bc8 for 0000:00:01.0 PCI: Found 0000:00:02.0 [10a9/0003] 00ff00 00 PCI: Calling quirk a8000000201b2bc8 for 0000:00:02.0 PCI: Found 0000:00:03.0 [10a9/0005] 000000 00 PCI: Calling quirk a8000000201b2bc8 for 0000:00:03.0 IP30: HEART ATTACK! Caught errors: 0x1040! interrupt #63 interrupt #57 PCI: Fixups for bus 0000:00 PCI: Bus scan for 0000:00 returning with max=00 got res [1f200000:1f2fffff] bus [200000:2fffff] flags 200 for BAR 0 of 0000:00:02.0 PCI: moved device 0000:00:02.0 resource 0 (200) to 200000 got res [1f300000:1f30ffff] bus [300000:30ffff] flags 7200 for BAR 6 of 0000:00:00.0 got res [1f310000:1f31ffff] bus [310000:31ffff] flags 7200 for BAR 6 of 0000:00:01.0 got res [1f320000:1f320fff] bus [320000:320fff] flags 200 for BAR 1 of 0000:00:00.0 PCI: moved device 0000:00:00.0 resource 1 (200) to 320000 got res [1f321000:1f321fff] bus [321000:321fff] flags 200 for BAR 1 of 0000:00:01.0 PCI: moved device 0000:00:01.0 resource 1 (200) to 321000 got res [1fa00000:1fa000ff] bus [a00000:a000ff] flags 101 for BAR 0 of 0000:00:00.0 PCI: moved device 0000:00:00.0 resource 0 (101) to a00000 got res [1fa00400:1fa004ff] bus [a00400:a004ff] flags 101 for BAR 0 of 0000:00:01.0 PCI: moved device 0000:00:01.0 resource 0 (101) to a00400 PCI: fixup irq: (0000:00:00.0) got 8 PCI: fixup irq: (0000:00:01.0) got 9 PCI: fixup irq: (0000:00:02.0) got 10 PCI: fixup irq: (0000:00:03.0) got 11 NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered EFS: 1.0a - http://aeschi.ch.eu.org/efs/ fuse init (API version 7.6) BeFS version: 0.9.3 io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: Calling quirk a8000000201b3de0 for 0000:00:00.0 PCI: Calling quirk a8000000202547d8 for 0000:00:00.0 PCI: Calling quirk a8000000201b3de0 for 0000:00:01.0 PCI: Calling quirk a8000000202547d8 for 0000:00:01.0 PCI: Calling quirk a8000000201b3de0 for 0000:00:02.0 PCI: Calling quirk a8000000202547d8 for 0000:00:02.0 PCI: Calling quirk a8000000202acbe8 for 0000:00:02.0 PCI: Calling quirk a8000000201b3de0 for 0000:00:03.0 PCI: Calling quirk a8000000202547d8 for 0000:00:03.0 PCI: Calling quirk a8000000202acbe8 for 0000:00:03.0 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 fakephp: Fake PCI Hot Plug Controller Driver Console: switching to colour frame buffer device 160x64 fb0: ImpactSR 1RSS frame buffer device Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled loop: loaded (max 8 devices) qla1280: QLA1040 found on PCI bus 0, dev 0 BRIDGE: IO #0, size 0x100 for little-endian 0000:00:00.0 --> direct I/O at bus 0x01000000 vma 0x000000f101000000 BRIDGE: Memory #1, size 0x1000 for little-endian 0000:00:00.0 --> direct 32-bit at bus 0x01000000 vma 0x000000f041000000 BRIDGE: Memory #6, size 0x10000 for little-endian 0000:00:00.0 --> direct 32-bit at bus 0x01010000 vma 0x000000f041010000 PCI: Enabling device 0000:00:00.0 (0006 -> 0007) scsi(0:0): Resetting SCSI BUS scsi0 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 Vendor: FUJITSU Model: MAH3091MC Rev: 0115 Type: Direct-Access ANSI SCSI revision: 04 scsi(0:0:1:0): Sync: period 10, offset 12 Vendor: FUJITSU Model: MAH3091MC Rev: 0115 Type: Direct-Access ANSI SCSI revision: 04 scsi(0:0:2:0): Sync: period 10, offset 12 qla1280: QLA1040 found on PCI bus 0, dev 1 BRIDGE: IO #0, size 0x100 for little-endian 0000:00:01.0 --> direct I/O at bus 0x01000100 vma 0x000000f101000100 BRIDGE: Memory #1, size 0x1000 for little-endian 0000:00:01.0 --> direct 32-bit at bus 0x01020000 vma 0x000000f041020000 BRIDGE: Memory #6, size 0x10000 for little-endian 0000:00:01.0 --> direct 32-bit at bus 0x01030000 vma 0x000000f041030000 PCI: Enabling device 0000:00:01.0 (0006 -> 0007) scsi(1:0): Resetting SCSI BUS scsi1 : QLogic QLA1040 PCI to SCSI Host Adapter Firmware version: 7.65.06, Driver version 3.26 st: Version 20050830, fixed bufsize 32768, s/g segs 256 SCSI device sda: 17850264 512-byte hdwr sectors (9139 MB) sda: Write Protect is off sda: Mode Sense: ab 00 10 08 SCSI device sda: drive cache: write back w/ FUA SCSI device sda: 17850264 512-byte hdwr sectors (9139 MB) sda: Write Protect is off sda: Mode Sense: ab 00 10 08 SCSI device sda: drive cache: write back w/ FUA sda: sda1 sda2 sda3 sda9 sda11 sd 0:0:1:0: Attached scsi disk sda SCSI device sdb: 17850264 512-byte hdwr sectors (9139 MB) sdb: Write Protect is off sdb: Mode Sense: ab 00 10 08 SCSI device sdb: drive cache: write back w/ FUA SCSI device sdb: 17850264 512-byte hdwr sectors (9139 MB) sdb: Write Protect is off sdb: Mode Sense: ab 00 10 08 SCSI device sdb: drive cache: write back w/ FUA sdb: sdb1 sd 0:0:2:0: Attached scsi disk sdb usbmon: debugfs is not available ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) USB Universal Host Controller Interface driver v3.0 Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.11rc4 (Wed Mar 22 10:27:24 2006 UTC). BRIDGE: Memory #0, size 0x2000 for little-endian 0000:00:03.0 --> direct 32-bit at bus 0x01040000 vma 0x000000f041040000 ALSA device list: #0: SGI RAD Audio at 0xf041040000 BRIDGE: Memory #0, size 0x100000 for little-endian 0000:00:02.0 --> direct 32-bit at bus 0x01100000 vma 0x000000f041100000 IOC3 part: [030-0891-003], serial: [KZG030] => class IP30 system 0000:00:02.0: ttyS0 at IOC3 0xf041120178 (irq = 64) is a 16550A 0000:00:02.0: ttyS1 at IOC3 0xf041120170 (irq = 64) is a 16550A Ethernet address is 08:00:69:13:66:d4. eth0: link up, 100Mbps, full-duplex, lpa 0x05E1 eth0: Using PHY 1, vendor 0x15f42, model 2, rev 3. eth0: IOC3 SSRAM has 128 kbyte. IOC3 Master Driver loaded for 0000:00:02.0 IPv4 over IPv4 tunneling driver TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> atkbd.c: keyboard reset failed on ioc3/serio0kbd kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing prom memory: 1024kb freed Freeing firmware memory: 1048576k freed Freeing unused kernel memory: 228k freed atkbd.c: keyboard reset failed on ioc3/serio0aux EXT3 FS on sda3, internal journal Adding 506036k swap on /dev/sda2. Priority:-1 extents:1 across:506036k kjournald starting. Commit interval 5 seconds EXT3-fs warning: checktime reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode