Difference between revisions of "GDB Debugger"
(Removing Windows reference.)
(Adding proper categories)
|Line 254:||Line 254:|
[http://linuxmanpages.com/man1/gdb.1.php GDB man page]
[http://linuxmanpages.com/man1/gdb.1.php GDB man page]
Latest revision as of 20:13, 17 April 2012
GDB, the GNU Project Debugger is a debugging tool provided with the GNU Compiler Collection (GCC). GDB allows you to stop and start a running program, examine its functioning, and make changes.
- 1 GDB Support in OpenOCD
- 2 Installing the CodeSourcery ARM Toolchain
- 3 Starting GDB
- 4 Connecting to OpenOCD
- 5 Debugging a Program on the Beagleboard
GDB Support in OpenOCD
The configure script provided with OpenOCD 0.5.0 already compiles OpenOCD to support the GDB debugger. The OpenOCD Ubuntu Package also includes GDB Support. If you have installed OpenOCD according to the guides on the Compiling OpenOCD page, your version of OpenOCD already supports GDB.
The -g flag tells the gcc compiler to build with GDB support. OpenOCD's configure script already includes the -g flag.
GDB Debugger is provided by default on Ubuntu 10.04. However, this version of GDB is only built to debug programs running on a Linux PC. You will need to download or compile a version of GDB that supports embedded devices. One such GDB build is provided with the CodeSourcery ARM toolchain.
Installing the CodeSourcery ARM Toolchain
CodeSourcery provides development tools for use with embedded devices, including a GCC cross-compiler and a GDB build for ARM targets. Download the latest version of the .bin installer from http://www.codesourcery.com/sgpp/lite/arm/portal/release1592. Direct link is here. Save this file anywhere on your computer, then navigate to it in a terminal window.
Run the installer like this:
You should see a loading bar followed by an installer GUI. However, you may see an error stating that the installer doesn't support the DASH shell.
If you see this error, disable DASH by typing
sudo dpkg-reconfigure -plow dash
This will give you the option to enable DASH by choosing <YES> or disable it by choosing <NO>. Choose no and run the installer again.
You should see the installer GUI now. The installer is fairly straightforward. This guide will assume that you choose the default option on each page.
The installer installs the CodeSourcery toolchain to your home directory. Add it to your PATH by editing your environment variables:
sudo cp /etc/environment /etc/backup_environment sudo gedit /etc/environment
This backs up your environment file and then opens it a text editor. (The backup is just in case something goes wrong; unless you make a mistake, you can delete backup_environment later.) Find the line "Path=..." (probably the only line). Add the following to the end of that line, inside the quotes:
That line should now read something like this:
Restart your computer.
Make sure everything installed correctly by running arm-none-eabi-gcc from anyhere, with no arguments. If everything installed correctly, you will see:
arm-none-eabi-gcc: no input files
In the terminal window, run arm-none-eabi-gdb from any directory.
Your terminal window should look like the image below, with a prompt reading (gdb) in place of the normal > command prompt.
Connecting to OpenOCD
Run OpenOCD as normal, as described in Running OpenOCD on Linux. To connect to OpenOCD, start GDB as above:
OpenOCD listens for GDB connections on port 3333. In GDB, connect to OpenOCD by typing target remote localhost:3333. (In this guide if you see (gdb) at the beginning of a command, that means enter that line into the GDB command prompt. Don't actually type the characters (gdb).)
(gdb) target remote localhost:3333
Before doing anything else, run reset init on the target. Use the monitor command to tell GDB to send the command to OpenOCD, like this:
(gdb) monitor reset init
This is important. You need to do this while GDB is connected to the OpenOCD, or you won't be able to halt or reset the target. If you don't run monitor reset init, you will encounter errors like this:
Sending Commands to OpenOCD
You can send commands to OpenOCD through GDB just like you can through a telnet connection. Type monitor, then the command, then enter. You can see a list of common OpenOCD commands here.
You can use the Linux command cd to change the current working directory in GDB. This changes the current directory only for GDB, not for Linux; when you exit GDB, you will be back in the directory where you started.
To quit GDB, type quit.
Instead of typing commands yourself every time you start GDB, you can create a script to always start GDB with the same series of commands. This script file is named .gdbinit. GDB looks for it in the current working directory.
You can use the script below to have GDB automatically connect to OpenOCD and run reset init on the target. Create a new folder in your home directory called GDB_OpenOCD_init, and a new text file in that folder. Copy the code below into the file:
echo Executing GDB with .gdbinit to connect to OpenOCD.\n echo .gdbinit is a hidden file. Press Ctrl-H in the current working directory to see it.\n # Connect to OpenOCD target remote localhost:3333 # Reset the target and call its init script monitor reset init # Halt the target. The init script should halt the target, but just in case monitor halt
Save the file as .gdbinit and close it. Like any file whose name begins with a period, .gdbinit is a hidden file. To see it, open the folder and press CTRL-H.
To test the init script, start OpenOCD as normal. Then navigate to GDB_OpenOCD_init/ and run CodeSourcery GDB.
cd ~/GDB_OpenOCD_init arm-none-eabi-gdb
You should see something like the image below. (In this image the target device is the Beagleboard. With different hardware the output of reset init will be different.)
Debugging a Program on the Beagleboard
This part of the guide will demonstrate how to run and debug a simple program on the Beagleboard. The program will only work on the Beagleboard, but the commands are the same on other target devices.
For this section you will need the Ubuntu packages git and make. Install the following packages by opening a new terminal window and typing:
sudo apt-get install git make
You may see a message stating that these pachages are already installed. That's fine.
Navigate to your home directory and use git to clone into https://github.com/mlu/cortal_dendrites.git.
cd ~ git clone https://github.com/mlu/cortal_dendrites.git
You should now have a folder in your home directory called cortal_dendrites/. Navigate to /home/USERNAME/cortal_dendrites/cortex_a8/standalone/LEDblink. This directory contains the source for LEDblink. Run make to compile it.
cd ~/cortal_dendrites/cortex_a8/standalone/LEDblink make
The folder should now contain a binary file called LEDblink. It also contains a hidden file called .gdbinit. This script should start GDB and load LEDblink, but the file is outdated and no longer works. Delete it so that you can't accidentally run it later.
Start OpenOCD as normal, then open a new terminal window. Run GDB, connect it to OpenOCD, and reset the Beagleboard. You can do this manually:
arm-none-eabi-gdb (gdb) target remote localhost:3333 (gdb) monitor reset init
...or using the .gdbinit script you created above:
cd ~/GDB_OpenOCD_init arm-none-eabi-gdb
The USR0 and USR1 LEDs on the Beagleboard should now be off. The Beagleboard has just been reset and is halted. Tell the Beagleboard to resume to let it boot. You should see USR0 and USR1 come on.
(gdb) monitor resume
Wait for the lights to come on, and then halt the Beagleboard again.
(gdb) monitor halt
Navigate to the directory containing LEDblink and load it:
(gdb) cd ~/cortal_dendrites/cortex_a8/standalone/LEDblink (gdb) load LEDblink (gdb) symbol-file LEDblink
Now run the program by typing:
You should see the USR0 and USR1 LEDs pulse on and off in sequence. LEDblink will run forever if you let it. When you're ready to stop it, press CTRL-C in the GDB terminal. To start it again, type cont again.
When debugging a program it's often useful to stop it in the middle to see what it's doing. You can do that with GDB using breakpoints. When you ran the command symbol-file LEDblink above, you loaded a file that allows GDB to map lines and functions in the source code to instructions in the executable. You can now instruct GDB to stop the program when it reaches a particular line or function.
Add a breakpoint associated with line 22 of LEDblink.c, then let LEDblink continue, like this:
(gdb) break 22 (gdb) cont
GDB will run until it hits line 22, then return you to the command prompt. Line 22 is inside a loop that never terminates, so GDB will hit this breakpoint over and over. Each time GDB hits the breakpoint, you can tell it to proceed by typing cont again.
You can have multiple breakpoints at a time. Type:
(gdb) break 30
...to create a second breakpoint at line 30. You can get a list of all breakpoints by typing:
(gdb) info breakpoints
info breakpoints lists your breakpoints by number. You can delete a breakpoint by entering delete followed by a number.
(gdb) delete 1
...deletes Breakpoint 1.
You can use GDB to read the value stored in a memory address with the x command. Type x followed by a memory address to output the value at that address. GDB assumes that the address is in decimal format unless you preface it with 0x to indicate hexadecimal. Memory addresses are usually expressed in hexadecimal, so remember to type 0x.
(gdb) x 0x49056090
The values at 0x49056090 and 0x49056094 control the USR0 and USR1 LEDs. The 22nd bit of each (0x00400000, in hex) controls USR0, and the 21st bit (0x00200000) controls USR1. Writing to 0x49056090 turns a light off, and writing to 0x49056094 turns a light on.
address 0x49056090 = 0x00400000: turn USR0 off
address 0x49056090 = 0x00200000: turn USR1 off
address 0x49056090 = 0x00600000: turn both LEDs off
address 0x49056094 = 0x00400000: turn USR0 on
address 0x49056094 = 0x00200000: turn USR1 on
address 0x49056094 = 0x00600000: turn both LEDs on
You can type x 0x49056090 and x 0x49056094 when LEDblink reaches a breakpoint to see what the program is doing.