Difference between revisions of "Hammer Board HOWTOS"

From eLinux.org
Jump to: navigation, search
(Removed link to deleted page.)
 
Line 2: Line 2:
  
 
[[Hammer_Getting_Started|Getting Started]] - A step by step guide to getting started with the [[Hammer_Board]]
 
[[Hammer_Getting_Started|Getting Started]] - A step by step guide to getting started with the [[Hammer_Board]]
 
[[Hammer_How_to_Swtching_5V_Regulator|How to add a Switching 5V regulator]] to the [[Hammer_Carrier]]
 
  
 
[[Hammer_How_to_build_Kernel|How to build a custom kernel]] for the [[Hammer_Board]]
 
[[Hammer_How_to_build_Kernel|How to build a custom kernel]] for the [[Hammer_Board]]

Latest revision as of 18:25, 27 January 2010

This is the index for the How-To section

Getting Started - A step by step guide to getting started with the Hammer_Board

How to build a custom kernel for the Hammer_Board

How to build the buildroot and the kernel for the Hammer_Board

How to add a USB Thumb Drive to the Hammer_Board

How to add a USB Ethernet adapter to the Hammer_Board

How to use JFFS2 Flash for the root partition on Hammer_Board

How to add a USB FTDI Serial adapter to the Hammer_Board

How to add an ENC28j60 SPI ethernet interface to the Hammer_Board

TCPIP Networking, Getting the .config necessary for TCPIP to work.

How To Console Settings and minimal configurations for console interface.

How to reflash Apex & the Kernel

How use the flyswatter to recover from a bricked Hammer_Board

How to add an LCD to the Hammer_Board

How to Configure Uart2 on the Hammer_Board

Hammer_LED_Driver_Module