Hammer Buzzer Driver

From eLinux.org
Revision as of 07:12, 29 January 2008 by Prpplague (Talk | contribs)

Jump to: navigation, search

UserSpace Access

the buzzer on the carrier board can be accessed from userspace via the sysfs interface. example interfaces are in /sys/devices/platform/tct_hammer-beeper.0/input:input1 .the directory include a file entry "beep" and "duration". to generate a beep echo a non zero value to the beep file entry:

echo 4096 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/beep

a tone will be generated for the length set in the duration file. to see what the current value is do:

cat /sys/devices/platform/tct_hammer-beeper.0/input\:input1/duration

the duration is measured in .01 seconds, i.e. a value of 100 is 1 second. if the value of duration is set for zero, the tone will be generated continuously until a zero value is echo'd to the beep entry:

echo 0 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/duration

echo 4096 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/beep

(tone generated)

echo 0 > /sys/devices/platform/tct_hammer-beeper.0/input\:input1/beep

(tone stops)