Difference between revisions of "Hammer Kit"
| Line 11: | Line 11: | ||
* JTAG ribbon cable (14 pin - 2 x 7, length = 8 inches) | * JTAG ribbon cable (14 pin - 2 x 7, length = 8 inches) | ||
* Hammer Kit CD – The CD includes source code and binaries for the bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Also included is OpenOCD for Linux, board schematics, and application notes. | * Hammer Kit CD – The CD includes source code and binaries for the bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Also included is OpenOCD for Linux, board schematics, and application notes. | ||
| + | |||
| + | [[Category:TCT-Hammer]] | ||
| + | [[Category:TinCanTools]] | ||
Revision as of 21:17, 3 June 2008
The Hammer Kit includes everything you need to start developing with Linux on the 40-pin ARM9 Hammer CPU board.
The Hammer Kit contains one each of the following items:
* Hammer: Samsung S3C2410A ARM9 CPU board in a 40-pin DIP package * Hammer Carrier: prototyping board designed for use with the Hammer CPU board * Flyswatter: USB based JTAG programmer for the Hammer CPU board * 5V1A Power Supply: 5V power supply for the Hammer Carrier board * USB Cable A to B: USB cable for the Flyswatter * RS232 Serial Cable – serial cable to connect the Hammer Carrier to a PC/terminal * JTAG ribbon cable (14 pin - 2 x 7, length = 8 inches) * Hammer Kit CD – The CD includes source code and binaries for the bootloader, Linux 2.6 kernel, and a uClibc/Busybox based root file system. Also included is OpenOCD for Linux, board schematics, and application notes.
