Difference between revisions of "Hammer LCD 8bit Color STN"
Line 46: | Line 46: | ||
|| || ||style="background:#80FF80" |Contrast +1.95V (+-0.8V)||style="background:#2099FF" |VCON||18 | || || ||style="background:#80FF80" |Contrast +1.95V (+-0.8V)||style="background:#2099FF" |VCON||18 | ||
|} | |} | ||
+ | |||
+ | |||
+ | NOTE: VCON should be variable control to adjust contrast and the VDD should have separate power control, i.e. via a gpio |
Revision as of 13:22, 3 March 2009
This is a "HowTo" for the Panasonic EDMGRB8KJF (Datasheet) available from EarthLCD to be used with the Hammer development module from TinCanTools
Pin Number | Hammer | Note | LCD | Pin Number |
---|---|---|---|---|
16 | VM | Display On/Off | DISPON | 16 |
17 | VFRAME | LCD Vertical sync | FRM | 20 |
18 | VLINE | LCD Horizontal sync | LOAD | 14 |
19 | VCLK | LCD pixel clock | CP | 12 |
21 | LCD_VD0 | LCD data bit 0 | Data0 | 9 |
22 | LCD_VD1 | LCD data bit 1 | Data1 | 8 |
23 | LCD_VD2 | LCD data bit 2 | Data2 | 7 |
24 | LCD_VD3 | LCD data bit 3 | Data3 | 6 |
25 | LCD_VD4 | LCD data bit 4 | Data4 | 4 |
26 | LCD_VD5 | LCD data bit 5 | Data5 | 3 |
27 | LCD_VD6 | LCD data bit 6 | Data6 | 2 |
28 | LCD_VD7 | LCD data bit 7 | Data7 | 1 |
+3.3V | VDD | 10 | ||
+3.3V | VDD | 11 | ||
+3.3V | VDD | 13 | ||
Ground | VSS | 5 | ||
Ground | VSS | 15 | ||
Ground | VSS | 17 | ||
Ground | VSS | 19 | ||
Contrast +1.95V (+-0.8V) | VCON | 18 |
NOTE: VCON should be variable control to adjust contrast and the VDD should have separate power control, i.e. via a gpio