Difference between revisions of "Hammer Programming Squeak"

From eLinux.org
Jump to: navigation, search
(Added a page describing how to install squeak on the hammer.)
 
Line 12: Line 12:
 
[http://www.davehylands.com/squeak/hammer/ here].
 
[http://www.davehylands.com/squeak/hammer/ here].
  
A precompiled version of the rootfs an kernel, which have soft-float enabled can be found over
+
A precompiled version of the rootfs and kernel, which have soft-float enabled can be found over
 
[http://www.davehylands.com/squeak/hammer-soft-float/ here].
 
[http://www.davehylands.com/squeak/hammer-soft-float/ here].
  
 
[[Category:TCT-Hammer]]
 
[[Category:TCT-Hammer]]
 
[[Category:TinCanTools]]
 
[[Category:TinCanTools]]

Revision as of 20:38, 2 February 2008

Squeak is version of the Smalltalk programming language.

To build Squeak for the Hammer, copy the buildroot-hammer.tar.gz tarball into your buildroot directory. Then execute:

tar xzf buildroot-hammer.tar.gz
make squeak

Note: Building squeak requires a soft-float version of the toolchain.

This will compile and build squeak. Currently, the files will be placed in buildroot/project_build_arm_nofpu/Hammer/root/usr/lib/squeak/3.6-3/

Some precompiled versions, along with a hammer.image file can be found over here.

A precompiled version of the rootfs and kernel, which have soft-float enabled can be found over here.