Difference between revisions of "JTAG"

From eLinux.org
Jump to: navigation, search
(Hardware (emulators))
Line 24: Line 24:
=== Tools ===
=== Tools ===
* [[UsingJtagTools]]
* [[UsingJtagTools]]
* http://openwince.sourceforge.net/jtag/
* http://openwince.sourceforge.net/jtag/

Revision as of 09:12, 8 September 2008

Joint Test Action Group, referring to IEEE Standard 1149.1: Four-pin (plus power/ground) interface designed to test connections between chips. Interface is serial (clocked via the TCK pin). Configuration is performed by manipulating a state machine one bit at a time (via TMS pin), then transferring one bit of data in and out per TCK clock (via TDI and TDO pins, respectively). Different instruction modes can be loaded to read the chip ID, sample input pins, drive (or float) output pins, manipulate chip functions, or bypass (pipe TDI to TDO to logically shorten chains of multiple chips). Operating frequency varies per chip, but is typically 10-100MHz TCK (10-100ns per bit time). The description of how JTAG is implemented for a specific device is described in a file specific to that device called a BSDL file.



Tutorial from Asset Intertech

Hardware (emulators)