Difference between revisions of "Jetson/AGX Xavier Alternative II For Cloning"

From eLinux.org
Jump to: navigation, search
(text formatting)
m (spaces added)
Line 6: Line 6:
dd if=/dev/mmcblk0p1 of=testimage.raw
dd if=/dev/mmcblk0p1 of=testimage.raw

Revision as of 16:20, 18 May 2019

First, stop disk at Xavier:

echo u > /proc/sysrq-trigger

Second, take raw image:

dd if=/dev/mmcblk0p1 of=testimage.raw

Moreover, the image could be taken over the network e.g. using one of two methods below:''

dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/image.raw

sender: sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>

reciever: etcat -l -p <port> > your_image_file

Third, make sparseimage [at Host PC]

./mksparse -v --fillpattern=0 ~/testimage.raw system.img

Fourth, deploy the sparse image to other devices:

sudo ./flash.sh -r jetson-Xavier mmcblk0p1