Difference between revisions of "Jetson/AGX Xavier Alternative II For Cloning"
< Jetson
m (spaces added) |
m (formatting) |
||
| Line 15: | Line 15: | ||
''sender:'' sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port> | ''sender:'' sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port> | ||
| − | ''reciever:'' | + | ''reciever:'' netcat -l -p <port> > your_image_file |
| + | |||
'''Third, make sparseimage [at Host PC]''' | '''Third, make sparseimage [at Host PC]''' | ||
Revision as of 16:21, 18 May 2019
First, stop disk at Xavier:
echo u > /proc/sysrq-trigger
Second, take raw image:
dd if=/dev/mmcblk0p1 of=testimage.raw
Moreover, the image could be taken over the network e.g. using one of two methods below:''
dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/image.raw
sender: sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>
reciever: netcat -l -p <port> > your_image_file
Third, make sparseimage [at Host PC]
./mksparse -v --fillpattern=0 ~/testimage.raw system.img
Fourth, deploy the sparse image to other devices:
sudo ./flash.sh -r jetson-Xavier mmcblk0p1
