Difference between revisions of "Jetson/AGX Xavier Alternative II For Cloning"

@@ Line 1: / Line 1: @@
-'''First, stop disk at Xavier:'''
+===== '''First, stop disk at Xavier:''' =====
-echo u > /proc/sysrq-trigger
+{| class="wikitable"
+|-
+| echo u > /proc/sysrq-trigger
+|}
-'''Second, take raw image:'''
+===== '''Second, take raw image:''' =====
+{| class="wikitable"
+|-
+| dd if=/dev/mmcblk0p1 of=/path/testimage.raw
+|}
-dd if=/dev/mmcblk0p1 of=/path/testimage.raw
-''
 ''Moreover, the image could be taken over the network e.g. using one of two methods below:''''
+{| class="wikitable"
+|-
+|  || dd if=/dev/mmcblk0p1 <nowiki>|</nowiki> ssh user@hostpc dd of=/data/testimage.raw
+|-
+| ''sender:'' || sudo dd if=/dev/mmcblk0p1 <nowiki>|</nowiki> netcat <ip_address> <port>
+|-
+| ''reciever:'' || netcat -l -p <port> > your_image_file
+|}
-dd if=/dev/mmcblk0p1 | ssh user@hostpc dd of=/data/testimage.raw
-''sender:'' sudo dd if=/dev/mmcblk0p1 | netcat <ip_address> <port>
-''reciever:'' netcat -l -p <port> > your_image_file
-'''Third, make sparseimage [at Host PC]'''
-./mksparse -v --fillpattern=0 ~/testimage.raw system.img
+===== '''Third, make sparseimage [at Host PC]''' =====
+{| class="wikitable"
+|-
+| ./mksparse -v --fillpattern=0 ~/testimage.raw system.img
+|}
-'''Fourth, deploy the sparse image to other devices:'''
-sudo ./flash.sh -r jetson-Xavier mmcblk0p1
+===== '''Fourth, deploy the sparse image to other devices:''' =====
+{| class="wikitable"
+|-
+| sudo ./flash.sh -r jetson-Xavier mmcblk0p1
+|}

	dd if=/dev/mmcblk0p1 \| ssh user@hostpc dd of=/data/testimage.raw
sender:	sudo dd if=/dev/mmcblk0p1 \| netcat <ip_address> <port>
reciever:	netcat -l -p <port> > your_image_file

Revision as of 16:24, 9 June 2019