Difference between revisions of "Jetson/Cloning"

From eLinux.org
Jump to: navigation, search
m (formatting of cloning page)
m (Restoring)
Line 29: Line 29:
 
== Restoring ==
 
== Restoring ==
  
The image can be restored to a Jetson by flashing it with the -r 'skip building and reuse existing system.img' flag:
+
The image can be restored to a Jetson by flashing it with the -r 'skip building and reuse existing system.img' flag.  Substitute the size of your partition if you originally flashed with a size different than 14580MiB.
  
 
<pre>cd ../
 
<pre>cd ../

Revision as of 11:58, 18 September 2014

Cloning the image

To make a carbon copy of an existing Jetson install, first connect the Jetson's micro-B USB flash port to the Linux machine that you originally flashed L4T from. Then enter the Jetson into recovery mode by holding RECOVERY and pressing RESET.

cd into the Linux_for_Tegra/bootloader directory that you used when originally flashing the Jetson. Inspect flash.cfg to obtain the partition id of system.img (in this case, 9)

[partition]
name=APP
id=9
type=data
allocation_policy=sequential
filesystem_type=basic
size=15288238080
file_system_attribute=0
partition_attribute=0
allocation_attribute=8
percent_reserved=0
filename=system.img

Next, remove the old system.img built from the initial flashing and download the new image from the Jetson. If the id of your system.img partition is different than 9, substitute that in the nvflash command.

sudo rm system.img
sudo ./nvflash --read 9 system.img --bl fastboot.bin --go

(downloading the image can take a while)

Restoring

The image can be restored to a Jetson by flashing it with the -r 'skip building and reuse existing system.img' flag. Substitute the size of your partition if you originally flashed with a size different than 14580MiB.

cd ../
sudo ./flash.sh -r -S 14580MiB jetson-tk1 mmcblk0p1

Reboot the Jetson when it's done flashing and the system should be restored to the state at the time of cloning.

Packaging

Keep the Linux_for_Tegra directory used during the cloning process to successfully restore the image. Linux_for_Tegra/rootfs can be removed as it's no longer needed. However the other L4T files should be transported along with the system.img to use during restoration.

sudo rm -r -f rootfs
cd ../
tar -zcvf my_backup.tar.gz Linux_for_Tegra

tar.gz can significantly compress the size of system.img and will retain the access privileges and is now convenient to copy/FTP/ect.