- 1 Downloading the Device Tree Compiler (DTC)
- 2 Kernel Device Tree in L4T
- 3 Kernel DTB in the Filesystem
- 4 Decompiling and compiling the device tree
- 5 Flashing the DTB to its partition
- 6 Flashing the DTB with DD utility
Downloading the Device Tree Compiler (DTC)
Considering that you are working on a Ubuntu machine, issue the following commands to set up DTC on the host machine.
$ sudo apt update $ sudo apt install device-tree-compiler
Kernel Device Tree in L4T
You can download the L4T Driver Package (BSP) as well as the Sample Root Filesystem from the L4T Archive. Please select the BSP that matches your device.
More instructions on how to set up L4T can be found in the Quick Start Guide.
The Device Tree Binaries (DTBs) that are presented here are the ones meant for the respective Jetson Developer Kits. For customized carrier boards, these might offer a great starting point and reference.
The referred DTBs can be found under the following path (after uncompressing
Kernel DTB for Jetson Nano Devkit
Kernel DTB for Jetson Xavier NX Devkit
Kernel DTB for Jetson TX2 Devkit
Kernel DTB for Jetson Xavier AGX Devkit
Kernel DTB in the Filesystem
Alternatively, the DTBs can be found under the following paths in the Jetson Filesystem after flashing the device.
Jetson bootloader resorts the the extlinux.conf file to determine where to load the DTB from. The file can be found under the following path.
The bootload first looks into the extlinux.conf file for the FDT property. This property determines the location of the DTB in the file system, for example:
By placing the device tree under the path assigned to the FDT property, the bootloader prioritize the DTB located in the filesystem.
Otherwise, in case the FDT property is not defined in the extlinux.conf file, the bootloader loads the DTB directly from the dedicated partition. For more information, please check the Partition Configuration.
Decompiling and compiling the device tree
To be able to modify and edit the device tree, the DTB need to be decompiled into a source file. For that, you can use the Device Tree Compiler issuing the following command (as an example with the Jetson Xavier NX Devkit DTB file. For other devices, please use the appropriate names)
$ dtc -I dtb -O dts -o output.dts tegra194-p3668-all-p3509-0000.dtb
The output.dts file has the source information of the device tree. Open it with your preferred text editor to modify its contents.
$ gedit output.dts
After modifying the source, you need to recompile the source into binary to be able to flash/load the device three.
$ dtc -I dts -O dtb -o tegra194-p3668-all-p3509-0000.dtb output.dts
Flashing the DTB to its partition
Flashing the DTB with DD utility