Jetson/Jetson TK1 Power

From eLinux.org
< Jetson
Revision as of 20:35, 4 June 2014 by Ewerness (talk | contribs) (Created page with "== Limiting power use == '''Note: Debugfs and non-upstream sysfs nodes aren't guaranteed to be supported in the future''' === Reducing power if display isn't required ===...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Limiting power use

Note: Debugfs and non-upstream sysfs nodes aren't guaranteed to be supported in the future

Reducing power if display isn't required

sudo echo -1 > /sys/kernel/debug/tegra_hdmi/hotplug
sudo echo 4 > /sys/class/graphics/fb0/blank

Restricting to low-power core only

Restricting the CPU to the low power companion core can significantly reduce peak power (if running on a power-limited battery pack, for example), though at lower performance

sudo echo 0 > /sys/devices/system/cpu/cpuquiet/tegra_cpuquiet/enable
sudo echo LP > /sys/kernel/cluster/active

Powering with a battery

Compatible plug

Slightly under-powered step-up converter

More powerful step-up converter

Both of these step-up converters will work either from a USB battery or directly off a LiPo battery. Note that most USB batteries can only produce 5V@2.1A ~= 10W at best, which is less than the TK1 draws at max power consumption.