Difference between revisions of "Jetson/Kodi (XBMC)"

From eLinux.org
Jump to: navigation, search
(Initial instructions for Kodi.)
m (Shervin.emami moved page Jetson/Installing Kodi to Jetson/Kodi (XBMC): Better name)
(No difference)

Revision as of 21:34, 28 October 2014

Kodi (XBMC) for Jetson TK1

Current status: Full acceleration with GLES/EGL and OMX on X.Org.

Performance Tips

It seems Kodi uses all cores that are online when Kodi starts so I recommend maximizing CPU performance before starting XBMC: http://elinux.org/Jetson/Performance#Maximizing_CPU_performance

With 4k/UltraHD/2160p TV you need to set the maximum GPU frequency as well.

Add those commands to a script and run the script from /etc/rc.local if you want them to be run automatically on every boot. It seems that something may change the governor later, so you may run the script with sudo again just before starting the XBMC.

Playback Quality Tips

Use Kodi Audio configuration under system settings to enable HDMI audio.

For jitter free video playback I recommend allowing Kodi to to adjust TV refresh rate always. For that you need to enable the Expert Settings and enable "Adjust display refresh rate to match video". For instructions, see: http://wiki.xbmc.org/index.php?title=Settings/Videos

With limited testing I suggest selecting Audio Clock as the A/V sync method.


If you have old non-PPA version installed, remove it first and delete all old Kodi settings (be sure to take a backup, if you have made any special settings):

sudo apt-get remove xbmc xbmc-bin
rm -rf $HOME/.xbmc

Add PPA for the Kodi, update and install Kodi:

sudo add-apt-repository ppa:kulve/xbmc-jetson-tk1
sudo apt-get update
sudo apt-get install xbmc

If some dependencies are not found, make sure you have universe and multiverse enabled.

sudo apt-add-repository universe
sudo apt-add-repository multiverse
sudo apt-get update