Difference between revisions of "Jetson/Tutorials/Battery Power"

From eLinux.org
Jump to: navigation, search
(Added information about the battery power configuration of MyzharBot project)
(Added image of the DC-DC converter enclosure)
Line 7: Line 7:
 
|| The [http://myzharbot.robot-home.it crawler robot MyzharBot] is powered by a [http://www.hobbyking.com/hobbyking/store/__9516__Turnigy_5000mAh_4S_30C_Lipo_Pack.html Turnigy 5000mAh 4S 30C Lipo Pack] battery. The battery is used to power both the motors than the logic units. The 12V voltage needed to power the NVidia Jetson TK1 are generated by a DC-DC converter. The DC-DC converter is necessary because the voltage of a 4S LiPo runs from 16.8V (Full Charge) to 12.8V (Warning Voltage). MyzharBot uses a [http://www.mini-box.com/DCDC-USB DC-DC programmable by USB], usually used for automotive application.  
 
|| The [http://myzharbot.robot-home.it crawler robot MyzharBot] is powered by a [http://www.hobbyking.com/hobbyking/store/__9516__Turnigy_5000mAh_4S_30C_Lipo_Pack.html Turnigy 5000mAh 4S 30C Lipo Pack] battery. The battery is used to power both the motors than the logic units. The 12V voltage needed to power the NVidia Jetson TK1 are generated by a DC-DC converter. The DC-DC converter is necessary because the voltage of a 4S LiPo runs from 16.8V (Full Charge) to 12.8V (Warning Voltage). MyzharBot uses a [http://www.mini-box.com/DCDC-USB DC-DC programmable by USB], usually used for automotive application.  
 
|| [[File:USB DC-DC.jpg|250px|thumbnail|center|Programmable DC-DC converter]]
 
|| [[File:USB DC-DC.jpg|250px|thumbnail|center|Programmable DC-DC converter]]
 +
|| [[File:USB_DC-DC_enclosure.jpg|250px|thumbnail|center|Programmable DC-DC enclosure]]
 
|}
 
|}

Revision as of 13:54, 24 June 2014

3s lipo does work just powered tk1 with old parrot a.r drone battery which is. 11.1v at 1amp

MyzharBot project

MyzharBot, the crawler robot
The crawler robot MyzharBot is powered by a Turnigy 5000mAh 4S 30C Lipo Pack battery. The battery is used to power both the motors than the logic units. The 12V voltage needed to power the NVidia Jetson TK1 are generated by a DC-DC converter. The DC-DC converter is necessary because the voltage of a 4S LiPo runs from 16.8V (Full Charge) to 12.8V (Warning Voltage). MyzharBot uses a DC-DC programmable by USB, usually used for automotive application.
Programmable DC-DC converter
Programmable DC-DC enclosure