Difference between revisions of "Jetson/exp-board"

From eLinux.org
Jump to: navigation, search
Line 2: Line 2:
  
 
There is a board named tk1exp. Designed by "http://dcac.taobao.com". It expanded all the available on the expansion header. Including MIPI CSI2, LCD interface, SPI(touch screen),I2C,GPIO,UART and so on.
 
There is a board named tk1exp. Designed by "http://dcac.taobao.com". It expanded all the available on the expansion header. Including MIPI CSI2, LCD interface, SPI(touch screen),I2C,GPIO,UART and so on.
 +
 +
 +
[[File:Tk1v2rev.jpg|thumbnail|tk1exp top]]
  
 
== Detail ==
 
== Detail ==

Revision as of 21:17, 4 November 2015

Summary

There is a board named tk1exp. Designed by "http://dcac.taobao.com". It expanded all the available on the expansion header. Including MIPI CSI2, LCD interface, SPI(touch screen),I2C,GPIO,UART and so on.


Detail

tk1exp summary

Interfaces list:

  • A : 4-wires or 5-wires resistive touch screen connector.
  • B : LCD interface,support eDP LCD by default, replace the coupling capacitor with 0ohm resistor and other resistor to support LVDS LCD。
  • C : additional LCD brightness power connector.
  • D : BR_UART1 RS-232 level connector.
  • E : 4-wires UART2 RS-232 level connector.

Coming soon....