Difference between revisions of "Jetson/xcb-lite"

From eLinux.org
Jump to: navigation, search
(Spec list)
Line 7: Line 7:
 
== Spec list ==
 
== Spec list ==
 
* '''Dimensions:''' 3.4" x 2.5" (87mm x 63mm) board
 
* '''Dimensions:''' 3.4" x 2.5" (87mm x 63mm) board
* '''miniHDMI:''' HDMI type c
+
* '''MicroHDMI:''' HDMI type D
 
* '''eDP: support''' 30pin or 40pin eDP cable
 
* '''eDP: support''' 30pin or 40pin eDP cable
* '''UART0,UART1,UART2 :''' 5V or 3.3V TTL level UARTs
+
* '''DSI interface.
 +
* '''UART0,UART1,UART2, UART3:''' 5V or 3.3V TTL level UARTs
 +
* '''CAN for TX2
 +
* '''DMIC and DSPK for TX2
 
* '''DC12V PWR IN:''' DC 12V input
 
* '''DC12V PWR IN:''' DC 12V input
 
* '''Fan:''' Fan interface
 
* '''Fan:''' Fan interface

Revision as of 02:59, 17 August 2017

top view
bottom view

Summary

The XCB-Lite TX1 carrier board is designed by DCDZ. Supply more interfaces in a small demention. Author's mail: zhang0801@139.com

Spec list

  • Dimensions: 3.4" x 2.5" (87mm x 63mm) board
  • MicroHDMI: HDMI type D
  • eDP: support 30pin or 40pin eDP cable
  • DSI interface.
  • UART0,UART1,UART2, UART3: 5V or 3.3V TTL level UARTs
  • CAN for TX2
  • DMIC and DSPK for TX2
  • DC12V PWR IN: DC 12V input
  • Fan: Fan interface
  • Key: four push button
  • Micro USB: Micro USB-A/B
  • USB 3.0: USB 3.0 expansion header same as the PC motherboard
  • Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
  • GPIO: 3.3V level GPIO
  • Charger: battery charger board interface and perform the "Auto-Power-On"
  • Audio: audio card expansion
  • Micro SD: Molex microSD Memory Card Connector, Push-Push Type
  • Touch: Touch screen or CAN bus expansion
  • CSI-XX: CSI-AB, CSI-CD, CSI-EF, support 6 camera sensor