Jetson Nano/ncb00

top view

bottom view

Summary

The NCB00 NANO/NX carrier board is designed by DCDZ. Supply more interfaces in a small dimension. Author's mail: mrobot@139.com

Spec list of version B04

• MicroHDMI: HDMI type D
• LED: one power red LED, one GPIO controlled green LED.
• UART0,UART1,UART2: 5V or 3.3V TTL level UARTs with 6pin GH1.25 connector
• CAN for NX
• PWR IN: DC 7V ~ 26V input
• Fan: Fan interface
• Key: Recovery, Reset and Power button keys
• Micro USB: Micro USB-B. Can be power in
• USB 3.0: USB type C connector
• PCIe: PCIE x 1 FFC connector
• IMU: BMI160 on board (optinal), and compatiable with ISAAC
• Gbe ethernet: expand the Gbe ethernet port by a little board width RJ45
• GPIO: Six 3.3V or 5V level GPIOs
• Auto-Power-On: support "Auto-Power-On" and "Auto-Power-Off"
• Micro SD: microSD Memory Card socket
• CSI-XX: CSI-01, CSI-23, CSI-4. Two 30pin FFC connector(compatiable with XCB-Lite carrier), One 15pin FFC connector(compatiable with Raspberry PI), One 24pin FFC(compatiable with Raspberry PI)
• Dimensions: 3.43" x 1.97" (87mm x 50mm) board
• Weight: 30g

[

Expansion board list

• ADAS cameras (testing)
• OV5640 M12 camera(testing)
• OV5693 camera(testing)
• IMX185 camera(testing)
• IMX274 camera
• HDMI to CSI2
• HDMI4K to CSI2 (testing)
• SDI to CSI2
• CVBS to CSI2(testing)
• 6cam board(testing)
• SPI board
• miniPCIe board
• M.2 key E board
• M.2 key M board