Jetson TX2

Revision as of 19:31, 16 March 2017 by Dusty-nv (talk | contribs)
Jump to: navigation, search

NVIDIA's Jetson TX2 is an embedded system-on-module (SoM) with dual-core NVIDIA Denver2 + quad-core ARM Cortex-A57, 8GB 128-bit LPDDR4 and integrated 256-core Pascal GPU.

Useful for deploying computer vision and deep learning, Jetson TX2 runs Linux and provides greater than 1TFLOPS of FP16 compute performance in less than 7.5 watts of power.

Jetson TX2 is available as the module, developer kit, and in compatible ecosystem products.

NVIDIA Jetson TX2 Module Devkit.png

Jetson TX2 Module

The Jetson TX2 module contains all the active processing components. The ports are broken out through a carrier board.

Below is a partial list of the module's features. Please see the Jetson TX2 Module Datasheet for the complete specifications.

Tegra Parker Block Diagram.png

Processing Components

  • dual-core NVIDIA Denver2 + quad-core ARM Cortex-A57
  • 256-core Pascal GPU
  • 8GB LPDDR4, 128-bit interface
  • 32GB eMMC
  • 4kp60 H.264/H.265 encoder & decoder
  • Dual ISPs (Image Signal Processors)
  • 1.4 gigapixel/sec MIPI CSI camera ingest

Ports & Peripherals

  • HDMI 2.0
  • 802.11a/b/g/n/ac 2×2 867Mbps WiFi
  • Bluetooth 4.1
  • USB3, USB2
  • 10/100/1000 BASE-T Ethernet
  • 12 lanes MIPI CSI 2.0, 2.5 Gb/sec per lane
  • PCIe gen 2.0, 1×4 + 1×1 or 2×1 + 1×2
  • SATA, SDcard
  • dual CAN bus
  • UART, SPI, I2C, I2S, GPIOs


  • 400-pin Samtec board-to-board connector
  • dimensions: 50x87mm   (1.96" x 3.42")
  • Thermal Transfer Plate (TTP), -25C to 80C operating temperature
  • mass: 85 grams, including TTP
  • 5.5-19.6VDC input power (consuming 7.5W under typical load)

Software Support