Jetson TX2/28.2.1 patches

< Jetson TX2
Revision as of 23:14, 21 February 2019 by ShaneCCC (talk | contribs)
Jump to: navigation, search


Fix missing timestamp for vi4

  • Symptom/observe: can not get the timestamp by v4l2 interface
patch link

Fix FE syncpt wait (observe first 3 green/corruption frames)

  • Symptom/observe: first few green/corruption frames
patch link

Error handling mechanism for T186 (recovery mechanism)

  • Symptom/observe: feature implement for T186.
Patch link:

Fix multiple sources per single session can't launch 4 and above sensors.

  • Symptom/observe: Argus - Syncing multiple source single session can't open 4 and above sensors.
patch link

Fix argus_camera launch failure with CSI-camera + USB-camera

  • Symptom/observe: CSI-cameras is able to capture with v4l2 or gstreamer, but argus_camera launching failed with USB-camera connected
patch link

Add low_latency_mode control for latency support.

  • add "--set-ctrl low_latency_mode=1" to the capture command line.
patch link


[MMAPI]Cannot run NvVideoDecoder in loop/Memory leak in NvVideoEncoder

prebuilt lib

[MMAPI]Fail to decode via NvJpegdecoder


[MMAPI]Cannot run nvjpeg encoder on child process

prebuilt lib

[GSTREAMER]Memory leak in nvcompositor

prebuilt lib

[GSTREAMER]fix temporal-tradeoff is not working

prebuilt lib


[PIN config] DPx_AUX_CH_xx as i2c function.

patch link

[script for flash multiple device]

patch link

TX1 Watchdog

Enable watchdog to reboot got reboot hang sometimes.

patch link