Difference between revisions of "Jetson TX2 Camera BringUp"

From eLinux.org
Jump to: navigation, search
(Created page with "== Get Prepared == * Please read through "Camera Development" section in https://developer.nvidia.com/embedded/dlc/l4t-documentation-28-1 == FAQ == *")
 
(add PXL_SOF debug tips)
Line 2: Line 2:
 
* Please read through "Camera Development" section in https://developer.nvidia.com/embedded/dlc/l4t-documentation-28-1
 
* Please read through "Camera Development" section in https://developer.nvidia.com/embedded/dlc/l4t-documentation-28-1
 
== FAQ ==  
 
== FAQ ==  
*
+
* Tips for debugging
 +
 
 +
:*if you saw below error message
 +
tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11
 +
 
 +
:*please check below 4 items in your sensor device tree, these should follow the settings in your sensor datasheet
 +
                                mode0 {
 +
                                        cil_settletime = "0";
 +
                                        active_w = "1920";
 +
                                        active_h = "1080";
 +
                                        embedded_metadata_height = "1";

Revision as of 23:56, 30 November 2017

Get Prepared

FAQ

  • Tips for debugging
  • if you saw below error message
tegra-vi4 15700000.vi: PXL_SOF syncpt timeout! err = -11
  • please check below 4 items in your sensor device tree, these should follow the settings in your sensor datasheet
                                mode0 {
                                        cil_settletime = "0";
                                        active_w = "1920";
                                        active_h = "1080";
                                        embedded_metadata_height = "1";