Difference between revisions of "Jetson nsight system"

From eLinux.org
Jump to: navigation, search
(Profile Application)
 
(6 intermediate revisions by the same user not shown)
Line 2: Line 2:
  
 
=Installation=
 
=Installation=
 +
Jetson NS (Nsight System) must be installed via SDKManager
 +
NSys User Guide: https://docs.nvidia.com/nsight-systems/UserGuide/index.html
 
==Install NS on x86 Linux Host==
 
==Install NS on x86 Linux Host==
1. Install Nsight System via SDKManager <br>
+
'''1. Install Nsight System via SDKManager''' <br>
 
<gallery mode=nolines widths=260>
 
<gallery mode=nolines widths=260>
 
NS_Install1.PNG|Step#1: Select "Host Machine"     
 
NS_Install1.PNG|Step#1: Select "Host Machine"     
Line 10: Line 12:
 
Just click '''Continue''' to install Nsight System on x86 Linux System.
 
Just click '''Continue''' to install Nsight System on x86 Linux System.
  
2. Verify Installation<br>
+
'''2. Verify Installation'''<br>
 
After installation is done, you can open it with "nsight-sys" command as below.
 
After installation is done, you can open it with "nsight-sys" command as below.
 
<gallery mode=nolines>
 
<gallery mode=nolines>
Line 17: Line 19:
  
 
==Install NS on Jetson Device==
 
==Install NS on Jetson Device==
'''Note''': on the newly installed Jetson system, there is not Nsight System on it. <br>
+
'''1. Installation Steps''' <br>
1. Installation Steps <br>
 
 
# On x86, launch the Nsight system installed via SDKManager as described above  
 
# On x86, launch the Nsight system installed via SDKManager as described above  
 
# In Nsight System, create a new project, and connect to Jetson device as below, this step will install the Nsight target binaries ontO Jetson device
 
# In Nsight System, create a new project, and connect to Jetson device as below, this step will install the Nsight target binaries ontO Jetson device
Line 24: Line 25:
 
Install_NS_libs_onto_Jetson_Device.png
 
Install_NS_libs_onto_Jetson_Device.png
 
</gallery>
 
</gallery>
2. Verify Installation <br>
+
'''2. Verify Installation''' <br>
 
After installation, nsys locates under  /opt/nvidia/nsight_systems/ . <br>
 
After installation, nsys locates under  /opt/nvidia/nsight_systems/ . <br>
  
Line 43: Line 44:
 
===== '''Profile''' =====
 
===== '''Profile''' =====
 
Run an application and capture its profile into a '''QDSTRM''' file, and view it in Nsys GUI profiler<br>
 
Run an application and capture its profile into a '''QDSTRM''' file, and view it in Nsys GUI profiler<br>
 +
  $ sudo /opt/nvidia/nsight_systems/nsys profile -t cuda,nvtx,nvmedia,osrt --accelerator-trace=nvmedia --show-output=true --force-overwrite=true --delay=20 --duration=90 --output=%p  '''$APP'''
  
 
  One exmaple to profile TRT inference:<br>
 
  One exmaple to profile TRT inference:<br>
Line 59: Line 61:
 
</gallery>
 
</gallery>
 
'''2. CUDA Kernel Run Time'''
 
'''2. CUDA Kernel Run Time'''
<gallery  mode=nolines widths="1500px" heights="400px">
+
<gallery  mode=nolines widths="1500px" heights="500px">
 
CUDA_kernel_time_time.png
 
CUDA_kernel_time_time.png
 
</gallery>
 
</gallery>
Line 66: Line 68:
 
TRT Enqueue.png
 
TRT Enqueue.png
 
</gallery>
 
</gallery>
 +
'''3. trtexec nsys log'''
 +
  https://docs.nvidia.com/deeplearning/tensorrt/developer-guide/index.html#command-line-programs

Latest revision as of 05:47, 23 October 2021

This page describes how to use Nsight System on Jetson L4T system

Installation

Jetson NS (Nsight System) must be installed via SDKManager
NSys User Guide: https://docs.nvidia.com/nsight-systems/UserGuide/index.html

Install NS on x86 Linux Host

1. Install Nsight System via SDKManager

Just click Continue to install Nsight System on x86 Linux System.

2. Verify Installation
After installation is done, you can open it with "nsight-sys" command as below.

Install NS on Jetson Device

1. Installation Steps

  1. On x86, launch the Nsight system installed via SDKManager as described above
  2. In Nsight System, create a new project, and connect to Jetson device as below, this step will install the Nsight target binaries ontO Jetson device

2. Verify Installation
After installation, nsys locates under /opt/nvidia/nsight_systems/ .

Profile

Remote Profile (UI)

User can run Nsight System on Host and remotely profile the application running on Jetson. User can select several options to enable the corresponding proiling.

Local Profile

User can check the profile option

$ /opt/nvidia/nsight_systems/nsys profile --help

Profile Application

Profile

Run an application and capture its profile into a QDSTRM file, and view it in Nsys GUI profiler

 $ sudo /opt/nvidia/nsight_systems/nsys profile -t cuda,nvtx,nvmedia,osrt --accelerator-trace=nvmedia --show-output=true --force-overwrite=true --delay=20 --duration=90 --output=%p  $APP
One exmaple to profile TRT inference:
$ sudo /opt/nvidia/nsight_systems/nsys profile -t cuda,nvtx,nvmedia,osrt --accelerator-trace=nvmedia --show-output=true --force-overwrite=true --delay=20 --duration=90 --output=%p /usr/src/tensorrt/bin/trtexec --loadEngine=yolo_dla_0_bs20.engine --useDLACore=0 --batch=20
Options: --accelerator-trace=nvmedia : enable profile DLA --delay : start profiling after 20 seconds --duration : profile time
View Log

Import QDSTRM file into GUI Nsys:
1. TensorRT and DLA Inference Time

2. CUDA Kernel Run Time

3. Enqueue Time

3. trtexec nsys log

 https://docs.nvidia.com/deeplearning/tensorrt/developer-guide/index.html#command-line-programs