Jolla tech and HW FAQ

From eLinux.org
Revision as of 14:30, 28 November 2013 by SpeedEvil (talk | contribs) (Hardware details)
Jump to: navigation, search

How to connect to SSH over usb connection from PC

the usb is either usb_storage or usb_net

  1. enable developer mode
  2. enable SSH (it's openssh, not dropbear)
  3. set password
  4. goto usb settings
  5. change that to developer mode
  6. reconnect usb cable
  7. you should see the ip address of the device on the UI
  8. you should be able to ssh to that address from PC (set an ip address first)


Hardware details

These are more fully described (well, not yet) on Jolla Hardware Subsystems