LeapFrog Pollux Platform: DFTPdevice
Work in progress, just jotting down notes currently.
Open port 5000 send ETH command Open port 5001
When device starts up port 5000 is open, once you make a connection, you need to send the ETH command. Then port 5001 opens up.
5000 is the port you send commands to.
5001 is the port you read the responses from.
DFTP Command List
The command list is fairly undocumented, there is a few listed in the sources, but most will be discovered by other means, like using Wireshark. This is the list so far.
All commands must have a trailing 0x00 attached. In python it would look something like.
In OpenLFConnect there is a special command send. It allows you to send any command you like, the 0x00 is appended for you, otherwise its all raw read/write. Obviously STOR and RETR won't work with it, but the rest you can play around with.
Some commands are Surgeon only.
Surgeon Only DFTP Version 1.12
GETS MFG_LOCALE Returns: MFG_LOCALE=""
SETS MOUNTPATIENT=2 or 0 Returns:200 OK Action: 2 mounts patient-rfs 0 ?
GETS METAINFS Returns: METAINFS=/tmp/metainfs
ETH <host ip> 1383 Action: Something with establishing a connection. must be sent before opening the second port.
LIST <directory path> Returns: <directory path> list 200 OK
STAT <path> Returns: ex. D 00000000 755 root:root 200 OK Notes: Seems to not always work as expected.
INFO Returns: PACKETSIZE=131072 VERSION=1.12 200 OK
GETS BATTERYLEVEL Returns: BATTERYLEVEL=<number> 200 OK
GETS BATTERYSTATUS Returns: BATTERYSTATUS=1 200 OK
STOR <remote_path> Action: Initiate file upload. Next: Send file data till EOF then send 101 EOF. Device responds with a lot of 100 ACK: <number> (Seems to be last amount of len(data) received.)
101 EOF Action: Ends STOR data transfer Notes:Must flush recv buffer first Returns: 200 OK
RETR <remote_path> Action: Downloads file. Next: Read socket buffer for data and send back 100 ACK: <number> (Seems to be last amount of len(data) received.) Ends: When 101 EOF is received.
RM <path> Action: Removes file Returns: 200 OK
RMD <path> Action:Removes directory Returns: 200 OK
IPKG Action:? Notes:Found listed in source code, does something with firmware.