Difference between revisions of "LeapFrog Pollux Platform: Mount NFS Directory"
m (→Configure Server and Client) |
|||
Line 4: | Line 4: | ||
== Prerequisites == | == Prerequisites == | ||
[[LeapFrog_Pollux_Platform:_Networking| Networking Setup]] | [[LeapFrog_Pollux_Platform:_Networking| Networking Setup]] | ||
+ | |||
+ | For Didj [[Didj_Enable_Networking| Enable Networking]] using the lf1000_ff_eth_defconfig file or manually adding NFS support. | ||
+ | |||
== Software Needed == | == Software Needed == | ||
Line 42: | Line 45: | ||
# ls | # ls | ||
− | '' For Network Enabled Didj '' | + | ''' For Network Enabled Didj ''' |
− | + | ||
mount -o nolock 10.0.0.1:/home /mnt | mount -o nolock 10.0.0.1:/home /mnt | ||
Revision as of 00:28, 12 July 2011
Summary
This is a tutorial to setup an NFS folder on your host PC for your explorer to boot from. NFS mounting of a directory will enable you to test applications and scripts without having to copy anything to your Leapster or LeapPad Explorer.
Prerequisites
For Didj Enable Networking using the lf1000_ff_eth_defconfig file or manually adding NFS support.
Software Needed
Linux host PC
nfs-kernel-server
nfs-common
Configure Server and Client
Configure the /etc/exports file to point to the folder(s) you would like to make available for NFS mounting
On Host
/home *(rw,sync,no_root_squash)
On Device
You'll need to edit /usr/bin/mountnfs, change:
mount -o nolock `get-ip host`:/home/lfu/nfsroot/LF /LF
to:
mount -o nolock 10.0.0.1:/home/ /mnt
Start the server and client:
On Host
$ sudo /etc/init.d/nfs-kernel-server start
For Leapster and LeapPad Explorers
On Device
# modprobe nfs # mountnfs # cd /mnt # ls
For Network Enabled Didj
mount -o nolock 10.0.0.1:/home /mnt
At this point should see the contents of your /home dir