Marvell EBU:Armada 38x

From eLinux.org
Revision as of 06:44, 17 July 2018 by Miquel (talk | contribs) (Recovery)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Note about the BootROM UART selection

While the UART-to-USB FTDI chip is wired on UART1, the BootROM only interacts on UART0. Both UARTs are available on the top side of the board through two horizontal 3-pin male headers, the one directer towards the mini-USB connector is UART1. The opposite one shall be used to enter BootROM recovery mode.