Minnowboard:IssueTracker
Until the final production infrastructure is up and running, this page will serve as a collaboration area for the various teams developing the MinnowBoard.
Issue format (copy and paste from source view):
- Issue description
- Priority (CRITICAL|HIGH|MEDIUM|LOW)
- Status (NEW|ACCEPTED|NEEDINFO|RESOLVED)
- Reporter dvhart
- Comment 1
- Comment 2 ...
Note: While tables are possible with the WIKI, entry is very error-prone. Please use the documented format.
Contents
UEFI Firmware Issues
- mPCIe not visible from OS
- Priority: CRITICAL
- Status: NEW
- Reporter: danders
- Zero 0x0-0x1000 per compatibility documentation
- Priority: CRITICAL
- Status: RESOLVED
- Reporter: dvhart
- Firmware now zeroes the page. Linux now has improved heuristics to detect bogus data.
- GOP driver needs to set GPIO state appropriately based on LVDS_PRESENT signal
- Priority: CRITICAL
- Status: ACCEPTED
- Reporter: dvhart
- Set DMI_BOARD_NAME to “MinnowBoard” per our previous SMBIOS discussion
- Priority: HIGH
- Status: ACCEPTED
- Reporter: dvhart
- VENDOR strings will be "Circuitco"
- Completed, pending next firmware release
- Random? Boot failures. One ends in “PROGRESS CODE: V2020004 I0” over serial
- Priority: MEDIUM
- Status: NEEDINFO
- Reporter: dvhart
- Lee unable to reproduce
- Board doesn't boot after poweroff, must cut/restore power
- Priority: MEDIUM
- Status: NEW
- Reporter: dvhart
- Ensure the intel-hda pci device config data is populated, as well as the VERB table
- Priority: MEDIUM
- Status: NEEDINFO
- Reporter: dvhart
- Audio device now works with MSI disabled. Need information from OS to determine why MSIs are being enabled.
- Verify we are using ACPI 5.0, boot messages only confirm ACPI 2.0
- Priority: MEDIUM
- Status: NEEDINFO
- Reporter: dvhart
- How do we tell which version of AML is passed to the OS?
- USB keyboard prevents serial console from receiving input (no hub in use)
- Priority: MEDIUM
- Status: ACCEPTED
- Reporter: dvhart
- General USB 1.0 issues are known and being worked.
- I/O space for WDT uninitialized (can't use the E6xx watchdog)
- Priority: LOW
- Status: ACCEPTED
- Reporter: dvhart
- Linux boot message: Firmware Bug: ACPI: BIOS _OSI(Linux) query ignored
- Priority: LOW
- Status: ACCEPTED
- Reporter: dvhart
- Add SSDT describing the GPIO present on the board (pending input from ACPI teams)
- Priority: LOW
- Status: NEEDINFO
- Reporter: dvhart
- Not going to happen before release. Maybe not at all. The existing drivers don't work this way and duplicating them for Minnow doesn't really make sense.
Linux Kernel Issues
- none listed currently
Yocto Project BSP Issues
- none listed currently
Angstrom Image Issues
- none listed currently