Difference between revisions of "Minnowboard:Lures Specifications"
(→Lure Types) |
|||
Line 1: | Line 1: | ||
+ | '''NOTE: The Lure Board Specifications are under development and are a "working in progress"''' | ||
+ | |||
= Lure Types = | = Lure Types = | ||
[[File:Lure-Types.jpg|500px]] | [[File:Lure-Types.jpg|500px]] |
Revision as of 14:25, 5 March 2013
NOTE: The Lure Board Specifications are under development and are a "working in progress"
Contents
Lure Types
Type A
- 106.68mm x 106.68mm (4.2" x 4.2")
- Connector A99244-ND Female (digikey part number)
- Mated height 17mm (when mated with 5mm base)
- Hex Standoff 24436K-ND (digikey part number)
- Placement over top of board
- Four mounting holes at edges of minnow
Type B
- 62.25mm x 106.68mm (2.45" x 4.2")
- Connector A99231TR-ND Female (digikey part number)
- Mated height 10mm (when mated with 5mm base)
- Hex Standoff 24433K-ND (digikey part number)
- Placement over top of board
- Two screw mounting holes in center of minnow
Type-C
- 62.25mm x 62.25mm (2.45" x 2.45")
- Connector A99192TR-ND Female (digikey part number)
- Mated height 6mm (when mated with 5mm base)
- No mounting standoffs (needs review)
- Extends from side of minnow board
- No mount holes (needs review)
Lure Features
Minnow Board and Passthrough
- Connector A99205CT-ND Male (digikey part number)
- Mated height base 5mm (plus female connector height)
EEPROM
- i2c eeprom
- recommended size 256k
- CAT24C256W
- configurable for address
LVDS Interface
- single FPDLink-I interface (aka LVDS LCD interface)
- 18 or 24 bpp support
- Max pixel clock of 68MHz
- Max resolution 1366x768 (approximately 1120000 total pixels)
- Embedded Media Graphics Driver support
- UEFI controls (??)
- backlight PWM controls
- LVDS Controls Reference Documentation from Intel
- FPDLink-I to RGB888 bridge(aka LVDS to parallel)
- Presentation and References for LCD interfaces
Reference Lures
Beacon Lure
- Type-C Lure
- 7 Segment Display via Shift Register
- EEPROM
- PWM Controlled RGB LED
- Beacon Lure Page
Trainer Lure
- Type-A Lure
- Atmel AVR (Arduino Compatible)
- Prototype Area
- EEPROM
- Trainer Lure Page
LVDS Lure
- Type-B Lure
- Backlight Power supply
- FPDLink-I connector (aka LVDS)
- EEPROM
- LVDS Lure Page
MiniPCIe / mSATA Lure
- Type-A Lure
- EEPROM
- miniPCIe Connector
- mSATA Connector
Prototype Breakout
- Type-C Lure
- Breakout for all low speed signals
- i2c
- spi
- gpio
- can
I/O Pad
- Type-B Lure
- 5 buttons
- 5 LEDS
- 2x10 Character LCD
- EEPROM