Difference between revisions of "Minnowboard:MaxLures"

From eLinux.org
Jump to: navigation, search
(adding link to schematic)
 
(88 intermediate revisions by 10 users not shown)
Line 1: Line 1:
MinnowBoard MAX Lure Information
+
[[Minnowboard:MinnowMax| Minnowboard Max]] Lure Information
 +
 
 +
= Lure Support =
 +
 
 +
Lures are owned and supported by their respective owners and manufacturers.  If you have issues the community can only give you best effort support, but issues should be taken to the respective manufacturers and designers.
 +
 
 +
= Lures In production (currently available) =
 +
 
 +
These are lures that are currently available, and obtainable in a pre-built state.
  
= Planned Lures =
 
 
== Calamari Lure ==
 
== Calamari Lure ==
 
{| width="100%"
 
{| width="100%"
 
  |- style="vertical-align:top;"
 
  |- style="vertical-align:top;"
  |Break out board intended mainly for testing gpio and low speed interfaces, as
+
  |Break out board intended mainly for testing gpio and low speed interfaces.
<br/>
+
Additional Information: [[Calamari_Lure| Calamari Lure Wiki Page]]
 
{| width="100%"
 
{| width="100%"
 
  |- style="vertical-align:top;"
 
  |- style="vertical-align:top;"
Line 20: Line 27:
 
** 3 Buttons
 
** 3 Buttons
 
  |
 
  |
* '''Prodcued by:''' CircuitCo
+
* '''Produced by:''' CircuitCo
 +
* '''Available From:'''
 +
** [http://www.mouser.com/ProductDetail/MinnowBoard-by-CircuitCo/999-0004990/?qs=sGAEpiMZZMvyjua%252biESkipvXKYC6zg1ztbkcFWyc3XQ%3d Mouser]
 +
|}
 +
 
 +
| [[File:CalamariLure-SlantedTop01-650.jpg|450px|right]]
 +
|-
 +
|
 +
* '''Design Files:'''
 +
** '''Licensed:''' [https://creativecommons.org/licenses/by-nc/4.0/ Creative Commons Attribution-NonCommerical 4.0 International License]
 +
**[[media:Calamari_Lure_A2_ccBYNC.zip|EAGLE design files]]
 +
**[[media:Calamari_Lure_A2_ccBYNC_Gerbers.zip|Gerber]]
 +
**[[media:Calamari_Lure_A2_ccBYNC_BOM.zip|Bill of Materials]]
 +
**[[media:Calamari_Lure_A2_ccBYNC_schematic.pdf|Schematic (PDF)]]
 +
|}
 +
 
 +
== Jetsam Lure ==
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
| mPCI-E break out board
 +
<br/>
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** Single mPCIe Slot
 +
|
 +
* '''Produced by:''' CircuitCo
 
*  Additional Information: none available right now
 
*  Additional Information: none available right now
 +
 +
 +
* '''Available from:'''
 +
** Currently unavailable
 
  |}
 
  |}
 +
|
 +
[[File:Jetsam-lure-a.jpg|450px|right]]
  
  | [[File:Calamari-lure-a.jpg|200px|right]]
+
  |-
 +
|
 +
* '''Design Files:'''
 +
** '''Licensed:''' [https://creativecommons.org/licenses/by-nc/4.0/ Creative Commons Attribution-NonCommericla 4.0 International License]
 +
**[[media:Jetsam-Lure_X1_ccBYNC.zip|EAGLE design files]]
 +
**[[media:Jetsam-Lure_X1_ccBYNC_Gerbers.zip|Gerber]]
 +
**[[media:Jetsam-Lure_X1_ccBYNC_BOM.zip|Bill of Materials]]
 +
**[[media:Jetsam-Lure_X1_ccBYNC_Schematic.pdf|Schematic (PDF)]]
 
  |}
 
  |}
  
 +
'''Note:''' PCIe expansion cards can be added via the Jetsam lure:
 +
* By itself, Jetsam allows both half and full-height mPCIe cards
 +
* Full desktop-style x1 PCIe cards can be added via a mPCIe-PCIe adapter such as those available from:
 +
** [http://amfeltec.com/adapters/ Amfeltec] (e.g. [http://amfeltec.com/products/flexible-minipci-express-to-pci-express-adapter/ Flexible MiniPCI Express to PCI Express Adapter]).
 +
* Although the electrical interface only supports x1, cards with up to x16 physical connections may be installed via an adapter such as those made by:
 +
** [http://www.startech.com/Cards-Adapters/Slot-Extension/ StarTech] (e.g. [http://www.startech.com/Cards-Adapters/Slot-Extension/PCI-Express-X1-to-X16-Low-Profile-Slot-Extension-Adapter~PEX1TO162 PCI Express X1 to X16 Low Profile Slot Extension Adapter]).
  
== Ika Lure ==
+
== Flotsam Lure ==
 
{| width="100%"
 
{| width="100%"
 
  |- style="vertical-align:top;"
 
  |- style="vertical-align:top;"
  |The Ika lure takes the existing low speed I/O and expands it (through I2C chips) to allow for an Arduino compatible shield to be used with the MinnowBoard MAX.
+
  | mSATA break out board
 +
<br/>
 
{| width="100%"
 
{| width="100%"
 
  |- style="vertical-align:top;"
 
  |- style="vertical-align:top;"
 
  |
 
  |
 
* '''Features:'''
 
* '''Features:'''
** SPI Based ADC
+
** single mSATA Slot
** 10K Slider POT
+
|
** RGB LED
+
* '''Produced by:''' CircuitCo
** 2 PWM LEDS
+
* Additional Information: none available right now
** 2 TTL UART Headers
+
 
** 7-Segment Display with 595 shift register
+
 
** I2C EEPROM
+
* '''Available from:'''
** 3 Buttons
+
** Currently Unavailable
 +
|}
 
  |
 
  |
* '''Prodcued by:''' CircuitCo
+
[[File:Flotsam-lure-a.jpg|450px|right]]
* '''[[MinnowBoard:MaxLure-Ika|Additional Information]]'''
+
 
 +
|-
 +
|
 +
 
 +
*'''Design Files:'''
 +
** '''Licensed:''' [https://creativecommons.org/licenses/by-nc/4.0/ Creative Commons Attribution-NonCommericla 4.0 International License]
 +
**[[media:Flotsam-Lure_A1_ccBYNC.zip|EAGLE design files]]
 +
**[[media:Flotsam-Lure_A1_ccBYNC_Gerbers.zip|Gerber]]
 +
**[[media:Flotsam-Lure_A1_ccBYNC_BOM.zip|Bill of Materials]]
 +
**[[media:Flotsam-Lure_A1_ccBYNC_Schematic.pdf|Schematic (PDF)]]
 
  |}
 
  |}
  | [[File:MinnowMax_-_Lure_-_Ika.png|200px|right]]
+
<br>
 +
 
 +
== Prototype Lure ==
 +
{| width="100%"
 +
  |- style="vertical-align:top;"
 +
| Generic Prototype Area on 0.1" grids
 +
<br/>
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** Generic Prototype Area on 0.1" grids
 +
|
 +
* '''Produced by:''' CircuitCo
 +
*  Additional Information: none available right now
 +
 
 +
 
 +
* '''Available from:'''
 +
** [http://www.mouser.com/ProductDetail/MinnowBoard-by-CircuitCo/999-0005477/?qs=sGAEpiMZZMvyjua%252biESkiops04N3sttuRKvopbcitPs%3d Mouser]
 
  |}
 
  |}
 +
|
 +
[[File:Prototype-lure-b.jpg|80px]]
 +
[[File:ProtoLure-SlantedSide01-650.jpg|400px]]
 +
|-
 +
|
  
== Seacat Lure ==
+
* '''Design Files:'''
[[File:Seacat-lure-a.jpg|200px|right]]
+
** '''Licensed:''' [https://creativecommons.org/licenses/by-nc/4.0/ Creative Commons Attribution-NonCommercial 4.0 International License]
* mPCIe Slot
+
**[[media:Proto_Lure_A1_ccBYNC.zip|EAGLE design files]]
* mSATA Slot
+
**[[media:Proto_Lure_A1_ccBYNC_Gerbers.zip|Gerber]]
<br>
+
**[[media:Proto_Lure_A1_ccBYNC_BOM.zip|Bill of Materials]]
<br>
+
**[[media:Proto_Lure_A1_ccBYNC_Schematic.pdf|Schematic (PDF)]]
 +
|}
 
<br>
 
<br>
 +
== IDP JTAG Lure ==
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
| Intel IDP JTAG lure
 +
<br/>
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** Adapter for Intel IDP JTAG
 +
|
 +
* '''Produced by:''' CircuitCo
 +
*  Additional Information: none available right now
 +
 +
 +
* '''Available from:'''
 +
** Currently Unavailable
 +
|}
 +
|
 +
[[File:jtaglure-slanted.jpg|400px]]
 +
|-
 +
|
 +
 +
* '''Design Files:'''
 +
** '''Licensed:''' [https://creativecommons.org/licenses/by-nc/4.0/ Creative Commons Attribution-NonCommericla 4.0 International License]
 +
**[[media:IDP_JTAG_ADAPTER_A2_ccBYNC.zip|EAGLE design files]]
 +
**[[media:IDP_JTAG_ADAPTER_A2_ccBYNC_GERBERS.zip|Gerbers]]
 +
**[[media:IDP_JTAG_ADAPTER_A2_ccBYNC_BOM.zip|Bill of Materials]]
 +
**[[media:IDP_JTAG_ADAPTER_A2_ccBYNC_Schematic.pdf|Schematic (PDF)]]
 +
|}
 +
 +
== Silverjaw Lure ==
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
| Dual mPCIe and mSATA Lure
 +
<br/>
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** Dual mPCIE and mSATA sockets
 +
** supports half-size and full-size cards
 +
** Boot from a memory card in the mSATA socket
 +
** efficient switching power supplies
 +
** same footprint as the Minnowboard Max
 +
|
 +
* '''Produced by:''' Tin Can Tools
 +
*  Additional Information: in stock
 +
 +
 +
* '''Available from:'''
 +
** [http://www.tincantools.com/MinowBoard_Max_Add-ons/Silverjaw_Lure.html Tin Can Tools]
 +
|}
 +
|
 +
[[File:silvrjaw_lure.jpg|400px]]
 +
|-
 +
|
 +
 +
* '''Design Files:'''
 +
** '''Licensed:''' [https://creativecommons.org/licenses/by-nc/4.0/ Creative Commons Attribution-NonCommercial 4.0 International License]
 +
**[[media:Silverjaw-Lure-Rev-A_GERBERS.zip|Gerbers]]
 +
**[[media:Silverjaw_Lure-Rev-A_BOM.zip|Bill of Materials]]
 +
**[[media:Silverjaw_Lure-Rev-A_schematic.pdf|Schematic (PDF)]]
 +
|}
 
<br>
 
<br>
 +
== <span style="color:red;">NEW</span> Debugger Lure ==
 +
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
| JTAG debugging interface for the Intel XDP
 +
<br/>
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** Compatible with the MinnowBoard Max and the MinnowBoard Turbot
 +
** Adds circuits to aid in debugging: serial EEPROM, DIP switch, user LED's, user switches, user test points
 +
** Board mounting hardware is included: 4 board spacers,  4 board standoffs, 4 screws
 +
** Board dimensions as the MinnowBoard Max:  99 mm x 74 mm (2.9 in. x 3.9 in.)
 +
** Package Includes: Debugger Lure board and board mounting hardware
 +
** RoHS compliant
 +
** Operating temperature: -40°C to +85°C
 +
** Storage temperature:  -65°C to +150°C
 +
|
 +
* '''Produced by:''' Tin Can Tools
 +
*  Additional Information: in stock
 +
 +
 +
* '''Available from:'''
 +
** [http://www.tincantools.com/Debugger-Lure.html Tin Can Tools]
 +
|}
 +
|
 +
[[File:Debugger_Lure_399x400.jpeg|400px]]
 +
|-
 +
|
 +
 +
* '''Design Files:'''
 +
** '''Licensed:''' [https://creativecommons.org/licenses/by-nc/4.0/ Creative Commons Attribution-NonCommercial 4.0 International License]
 +
**[[media:Silverjaw-Lure-Rev-A_GERBERS.zip|Gerbers]]
 +
**[[media:Silverjaw_Lure-Rev-A_BOM.zip|Bill of Materials]]
 +
**[[media:Debugger Lure Rev-A.pdf|Schematic (PDF)]]
 +
|}
 
<br>
 
<br>
  
== Jetsam Lure ==
+
= Ready to Build =
[[File:Jetsam-lure-a.png|200px|right]]
 
* Single mPCIe Slot
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
  
== Flotsam Lure ==
+
These are lures that are functionally complete, but are not being (or not currently) in production and/or available to buy.  To be in this state the lures need to be in a state where an individual has enough information to fully build these on their own.
[[File:Flotsam-lure-a.png|200px|right]]
 
* single mSATA Slot
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
<br>
 
  
== Nic Lure ==
+
== Cuttle(bone) Lure ==
* Single Gigabit Ethernet
+
{| width="100%"
 +
|- style="vertical-align:top;"
 +
| Adapter from Low Speed Connector I/O (I2C,I2S,UARTs,SPI,GPIO) to BeagleBone * Capes.  Works with a variety of Capes but not all.
 +
<br/>
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** low speed adapter for MAX to BeagleBone capes
 +
|
 +
* '''Produced by:''' Tom King
 +
*  Additional Information: none available right now
 +
|}
 +
|
 +
[[File:Cuttle_lure.png|450px|right]]
  
== Prototype Lure ==
+
|-
* Generic Prototype Area on 0.1" grids
+
|
  
== Can Bus Lure ==
+
*'''Design Files:'''
* standard CAN Bus
+
**[[Cuttle_lure_pg1.pdf|Schematic(PDF)]]<br>
* Option for STN1110
+
**Project files on [https://github.com/ka6sox/Cuttlebone_Lure Github]
 +
|}
  
== RS-485 Lure ==
+
== Tadpole Lure ==
* standard RS-485
+
{| width="100%"
 +
|- style="vertical-align:top;"
 +
| A small low speed adapter with and RGB (gpio controlled) LED, along with a small prototyping area. For more information including assembly information visit the [[Tadpole_Lure|Tadpole Lure Wiki Page]]
 +
<br/>
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** GPIO controlled RGB LED
 +
|
 +
* '''Produced by:''' Intel
 +
*  Additional Information: [[Tadpole_Lure| Tadpole Lure Wiki Page]]
 +
|}
 +
|
 +
[[File:Tadpole-completed.jpg|225px|right]]
  
== RS-232 Lure ==
+
|-
* 2 DB-9 connectors
+
|
 +
The Tadpole Lure is an "Open Source Hardware" compatible device and is licensed under Creative Commons Attribution-ShareAlike 3.0 United States (CC BY-SA 3.0 US)
 +
[[File:Oshw-logo.png|100px|right]]
 +
*'''Design Files:'''
 +
**[[media:tadpole-sch.pdf|Schematic PDF]]
 +
**[[media:tadpole.zip|Eagle CAD Files]]
 +
**[[media:tadpole-gerbers.zip|Gerbers Files]]
 +
|}
  
== Relay Cape ==
+
= Planned Lures =
* 4 Relays
 
* GPIO Controls
 
  
== USB Hub Lure ==
+
These are lures that are either in the planning or early design stages and are not ready for production.
* 4 USB Host Ports
 
  
== PWM Lure ==
+
= Retired =
* 32 PWM Outputs
 
  
== ADC Lure ==
+
These are lures that do not have build files available, but information pertaining to them is still pertinent.
* 8 ADC inputs
 
  
== Moto Lure ==
+
== Ika Lure ==
* Dual H-Bridge
+
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|The Ika lure takes the existing low speed I/O and expands it (through I2C chips) to allow for an Arduino compatible shield to be used with the MinnowBoard MAX.
 +
{| width="100%"
 +
|- style="vertical-align:top;"
 +
|
 +
* '''Features:'''
 +
** Electrically Arduino Compatible
 +
** 3.3v & 5.5v tolerant (flipped via jumpers)
 +
|
 +
* '''Produced by:''' CircuitCo
 +
* '''[[MinnowBoard:MaxLure-Ika|Additional Information]]'''
 +
|}
 +
| [[File:MinnowMax_-_Lure_-_Ika.png|200px|right]] [[File:Ika-lure-a.jpg|200px|right]]
 +
|}
  
== Audio Lure ==
+
'''Note:''' Board was cancelled, though some boards were made available at various conferences as give aways.
* Analog Audio Ouput
 
* Analog Audio Input
 
  
== MiniDisplay Lure ==
+
[[Category:MinnowBoard]]
* SPI Based TFT Display
+
[[Category:MinnowBoard Expansion Boards]]
* 2.8"
 
* 4-Wire Resistive Touch
 

Latest revision as of 10:39, 13 May 2016

Minnowboard Max Lure Information

Lure Support

Lures are owned and supported by their respective owners and manufacturers. If you have issues the community can only give you best effort support, but issues should be taken to the respective manufacturers and designers.

Lures In production (currently available)

These are lures that are currently available, and obtainable in a pre-built state.

Calamari Lure

Break out board intended mainly for testing gpio and low speed interfaces.

Additional Information: Calamari Lure Wiki Page

  • Features:
    • SPI Based ADC
    • 10K Slider POT
    • RGB LED
    • 2 PWM LEDS
    • 2 TTL UART Headers
    • 7-Segment Display with 595 shift register
    • I2C EEPROM
    • 3 Buttons
  • Produced by: CircuitCo
  • Available From:
CalamariLure-SlantedTop01-650.jpg

Jetsam Lure

mPCI-E break out board


  • Features:
    • Single mPCIe Slot
  • Produced by: CircuitCo
  • Additional Information: none available right now


  • Available from:
    • Currently unavailable
Jetsam-lure-a.jpg

Note: PCIe expansion cards can be added via the Jetsam lure:

Flotsam Lure

mSATA break out board


  • Features:
    • single mSATA Slot
  • Produced by: CircuitCo
  • Additional Information: none available right now


  • Available from:
    • Currently Unavailable
Flotsam-lure-a.jpg


Prototype Lure

Generic Prototype Area on 0.1" grids


  • Features:
    • Generic Prototype Area on 0.1" grids
  • Produced by: CircuitCo
  • Additional Information: none available right now


Prototype-lure-b.jpg ProtoLure-SlantedSide01-650.jpg


IDP JTAG Lure

Intel IDP JTAG lure


  • Features:
    • Adapter for Intel IDP JTAG
  • Produced by: CircuitCo
  • Additional Information: none available right now


  • Available from:
    • Currently Unavailable

Jtaglure-slanted.jpg

Silverjaw Lure

Dual mPCIe and mSATA Lure


  • Features:
    • Dual mPCIE and mSATA sockets
    • supports half-size and full-size cards
    • Boot from a memory card in the mSATA socket
    • efficient switching power supplies
    • same footprint as the Minnowboard Max
  • Produced by: Tin Can Tools
  • Additional Information: in stock


Silvrjaw lure.jpg


NEW Debugger Lure

JTAG debugging interface for the Intel XDP


  • Features:
    • Compatible with the MinnowBoard Max and the MinnowBoard Turbot
    • Adds circuits to aid in debugging: serial EEPROM, DIP switch, user LED's, user switches, user test points
    • Board mounting hardware is included: 4 board spacers, 4 board standoffs, 4 screws
    • Board dimensions as the MinnowBoard Max: 99 mm x 74 mm (2.9 in. x 3.9 in.)
    • Package Includes: Debugger Lure board and board mounting hardware
    • RoHS compliant
    • Operating temperature: -40°C to +85°C
    • Storage temperature: -65°C to +150°C
  • Produced by: Tin Can Tools
  • Additional Information: in stock


Debugger Lure 399x400.jpeg


Ready to Build

These are lures that are functionally complete, but are not being (or not currently) in production and/or available to buy. To be in this state the lures need to be in a state where an individual has enough information to fully build these on their own.

Cuttle(bone) Lure

Adapter from Low Speed Connector I/O (I2C,I2S,UARTs,SPI,GPIO) to BeagleBone * Capes. Works with a variety of Capes but not all.


  • Features:
    • low speed adapter for MAX to BeagleBone capes
  • Produced by: Tom King
  • Additional Information: none available right now
Cuttle lure.png

Tadpole Lure

A small low speed adapter with and RGB (gpio controlled) LED, along with a small prototyping area. For more information including assembly information visit the Tadpole Lure Wiki Page


  • Features:
    • GPIO controlled RGB LED
Tadpole-completed.jpg

The Tadpole Lure is an "Open Source Hardware" compatible device and is licensed under Creative Commons Attribution-ShareAlike 3.0 United States (CC BY-SA 3.0 US)

Oshw-logo.png

Planned Lures

These are lures that are either in the planning or early design stages and are not ready for production.

Retired

These are lures that do not have build files available, but information pertaining to them is still pertinent.

Ika Lure

The Ika lure takes the existing low speed I/O and expands it (through I2C chips) to allow for an Arduino compatible shield to be used with the MinnowBoard MAX.
  • Features:
    • Electrically Arduino Compatible
    • 3.3v & 5.5v tolerant (flipped via jumpers)
MinnowMax - Lure - Ika.png
Ika-lure-a.jpg

Note: Board was cancelled, though some boards were made available at various conferences as give aways.