Difference between revisions of "Minnowboard:MaxLures"

From eLinux.org
Jump to: navigation, search
(add IDP JTAG lure)
(Prototype Lure)
Line 125: Line 125:
  
 
* '''Design Files:'''
 
* '''Design Files:'''
**[http://www.elinux.org/images/d/d9/Proto_Lure_A1.zip EAGLE design files]
+
**[[media:Proto_Lure_A1.zip|EAGLE design files]]
**[http://www.elinux.org/images/0/01/Proto_Lure_A1_Gerbers.zip Gerber]
+
**[[media:Proto_Lure_A1_Gerbers.zip|Gerber]]
**[http://www.elinux.org/images/9/97/Proto_Lure_A1_BOM.zip Bill of Materials]
+
**[[media:Proto_Lure_A1_BOM.zip|Bill of Materials]]
**[http://www.elinux.org/images/6/60/Proto_Lure_A1_Schematic.pdf Schematic (PDF)]
+
**[[media:Proto_Lure_A1_Schematic.pdf|Schematic (PDF)]]
 
  |}
 
  |}
  

Revision as of 11:43, 16 March 2015

Minnowboard Max Lure Information

Lures In production (currently available)

Calamari Lure

Break out board intended mainly for testing gpio and low speed interfaces, as


  • Features:
    • SPI Based ADC
    • 10K Slider POT
    • RGB LED
    • 2 PWM LEDS
    • 2 TTL UART Headers
    • 7-Segment Display with 595 shift register
    • I2C EEPROM
    • 3 Buttons
  • Produced by: CircuitCo
  • Additional Information: none available right now


CalamariLure-SlantedTop01-650.jpg

Jetsam Lure

mPCI-E break out board


  • Features:
    • Single mPCIe Slot
  • Produced by: CircuitCo
  • Additional Information: none available right now


Jetsam-lure-a.jpg

Flotsam Lure

mSATA break out board


  • Features:
    • single mSATA Slot
  • Produced by: CircuitCo
  • Additional Information: none available right now


Flotsam-lure-a.jpg


Prototype Lure

Generic Prototype Area on 0.1" grids


  • Features:
    • Generic Prototype Area on 0.1" grids
  • Produced by: CircuitCo
  • Additional Information: none available right now


Prototype-lure-b.jpg ProtoLure-SlantedSide01-650.jpg

IDP JTAG Lure

Intel IDP JTAG lure


  • Features:
    • Adapter for Intel IDP JTAG
  • Produced by: CircuitCo
  • Additional Information: none available right now


Jtaglure-slanted.jpg

Planned Lures

Cuttle(bone) Lure

Adapter from Low Speed Connector I/O (I2C,I2S,UARTs,SPI,GPIO) to BeagleBone * Capes. Works with a variety of Capes but not all.


  • Features:
    • low speed adapter for MAX to BeagleBone capes
  • Produced by: Tom King
  • Additional Information: none available right now
Cuttle lure.png