Minnowboard:MaxLures

Minnowboard Max Lure Information

Planned Lures

Calamari Lure

Break out board intended mainly for testing gpio and low speed interfaces, as Features: SPI Based ADC 10K Slider POT RGB LED 2 PWM LEDS 2 TTL UART Headers 7-Segment Display with 595 shift register I2C EEPROM 3 Buttons Produced by: CircuitCo Additional Information: none available right now Available From: Technodisti
Design Files: EAGLE design files Gerber Bill of Materials Schematic (PDF)

Ika Lure

The Ika lure takes the existing low speed I/O and expands it (through I2C chips) to allow for an Arduino compatible shield to be used with the MinnowBoard MAX. Features: Electrically Arduino Compatible 3.3v & 5.5v tolerant (flipped via jumpers) Produced by: CircuitCo Additional Information

Seacat Lure

mPCI-E and mSATA break out board Features: mPCIe Slot mSATA Slot Produced by: CircuitCo Additional Information: none available right now
Design files: Schematic (PDF)

Jetsam Lure

mPCI-E break out board Features: Single mPCIe Slot Produced by: CircuitCo Additional Information: none available right now Available from: Technodisti
Design Files: EAGLE design files Gerber Bill of Materials Schematic (PDF)

Flotsam Lure

mSATA break out board Features: single mSATA Slot Produced by: CircuitCo Additional Information: none available right now Available from: Technodisti
Design Files: EAGLE design files Gerber Bill of Materials Schematic (PDF)

Prototype Lure

Generic Prototype Area on 0.1" grids Features: Generic Prototype Area on 0.1" grids Produced by: CircuitCo Additional Information: none available right now Available from: Technodisti
Design Files: EAGLE design files Gerber Bill of Materials Schematic (PDF)

Cuttle(bone) Lure

Adapter from Low Speed Connector I/O (I2C,I2S,UARTs,SPI,GPIO) to BeagleBone * Capes. Works with a variety of Capes but not all.

• Design Files:
  • Schematic(PDF)
    
  • Project files on Github

Nic Lure

• Single Gigabit Ethernet

Can Bus Lure

• standard CAN Bus
• Option for STN1110

RS-485 Lure

• standard RS-485

RS-232 Lure

• 2 DB-9 connectors

Relay Cape

• 4 Relays
• GPIO Controls

USB Hub Lure

• 4 USB Host Ports

PWM Lure

• 32 PWM Outputs

ADC Lure

• 8 ADC inputs

Moto Lure

• Dual H-Bridge

Audio Lure

• Analog Audio Ouput
• Analog Audio Input

MiniDisplay Lure

• SPI Based TFT Display
• 2.8"
• 4-Wire Resistive Touch