Minnowboard Max Lure Information
Planned Lures
Calamari Lure
Break out board intended mainly for testing gpio and low speed interfaces, as
- Features:
- SPI Based ADC
- 10K Slider POT
- RGB LED
- 2 PWM LEDS
- 2 TTL UART Headers
- 7-Segment Display with 595 shift register
- I2C EEPROM
- 3 Buttons
|
- Produced by: CircuitCo
- Additional Information: none available right now
|
|
|
|
Ika Lure
The Ika lure takes the existing low speed I/O and expands it (through I2C chips) to allow for an Arduino compatible shield to be used with the MinnowBoard MAX.
- Features:
- Electrically Arduino Compatible
- 3.3v & 5.5v tolerant (flipped via jumpers)
|
|
|
|
Seacat Lure
mPCI-E and mSATA break out board
|
- Produced by: CircuitCo
- Additional Information: none available right now
|
|
|
|
Jetsam Lure
mPCI-E break out board
|
- Produced by: CircuitCo
- Additional Information: none available right now
|
|
|
|
Flotsam Lure
mSATA break out board
|
- Produced by: CircuitCo
- Additional Information: none available right now
|
|
|
|
Prototype Lure
Generic Prototype Area on 0.1" grids
- Features:
- Generic Prototype Area on 0.1" grids
|
- Produced by: CircuitCo
- Additional Information: none available right now
|
|
|
|
Cuttle(bone) Lure
Adapter from Low Speed Connector I/O (I2C,I2S,UARTs,SPI,GPIO) to BeagleBone * Capes. Works with a variety of Capes but not all.
- Features:
- low speed adapter for MAX to BeagleBone capes
|
- Produced by: Tom King
- Additional Information: none available right now
|
|
|
|
Nic Lure
Can Bus Lure
- standard CAN Bus
- Option for STN1110
RS-485 Lure
RS-232 Lure
Relay Cape
USB Hub Lure
PWM Lure
ADC Lure
Moto Lure
Audio Lure
- Analog Audio Ouput
- Analog Audio Input
MiniDisplay Lure
- SPI Based TFT Display
- 2.8"
- 4-Wire Resistive Touch